Table of Contents
International Journal of Metals
Volume 2017, Article ID 6489769, 10 pages
https://doi.org/10.1155/2017/6489769
Research Article

Improving Thin Strip Profile Using Work Roll Cross and Work Roll Shifting Methods in Cold Strip Rolling

School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong, NSW 2522, Australia

Correspondence should be addressed to Zhengyi Jiang; ua.ude.wou@gnaij

Received 14 September 2016; Accepted 13 November 2016; Published 9 January 2017

Academic Editor: Manoj Gupta

Copyright © 2017 Hasan Tibar and Zhengyi Jiang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Hasan Tibar and Zhengyi Jiang, “Improving Thin Strip Profile Using Work Roll Cross and Work Roll Shifting Methods in Cold Strip Rolling,” International Journal of Metals, vol. 2017, Article ID 6489769, 10 pages, 2017. https://doi.org/10.1155/2017/6489769.