Table of Contents
Indian Journal of Materials Science
Volume 2014, Article ID 909506, 5 pages
http://dx.doi.org/10.1155/2014/909506
Research Article

Influence of Al and Ti Additions on Microstructure and Mechanical Properties of Leaded Brass Alloys

1Mechanical Engineering Department, University of Al-Anbar, Ramadi, Iraq
2Renewable Energy Research Center, University of Al-Anbar, Ramadi, Iraq

Received 13 April 2014; Revised 1 June 2014; Accepted 5 June 2014; Published 16 July 2014

Academic Editor: Debdulal Das

Copyright © 2014 Rajab Mohammed Hussein and Osama Ibrahim Abd. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Rajab Mohammed Hussein and Osama Ibrahim Abd, “Influence of Al and Ti Additions on Microstructure and Mechanical Properties of Leaded Brass Alloys,” Indian Journal of Materials Science, vol. 2014, Article ID 909506, 5 pages, 2014. https://doi.org/10.1155/2014/909506.