Table of Contents
Indian Journal of Materials Science
Volume 2014 (2014), Article ID 938789, 6 pages
http://dx.doi.org/10.1155/2014/938789
Research Article

Effect of Concentration of Sodium Hydroxide and Degree of Heat Curing on Fly Ash-Based Geopolymer Mortar

1Department of Applied Mechanics, Government College of Engineering, Aurangabad, Maharashtra 431005, India
2Department of Applied Mechanics, Government College of Engineering, Karad, Maharashtra 431416, India

Received 22 January 2014; Revised 1 April 2014; Accepted 15 April 2014; Published 5 May 2014

Academic Editor: Marino Lavorgna

Copyright © 2014 Subhash V. Patankar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Davidovits, “Global warming impact on the cement and aggregate industries,” World Resource Review, vol. 6, no. 2, pp. 263–278, 1994. View at Google Scholar
  2. D. Hardjito, S. E. Wallah, D. M. J. Sumjouw, and B. V. Rangan, “Geopolymer concrete: turn waste into environmentally friendly concrete,” in Proceedings of the International Conference on Recent Trends in Concrete Technology and Structures (INCONTEST '03), pp. 129–140, Coimbatore, India, 2003.
  3. D. Hardjito, S. E. Wallah, D. M. J. Sumjouw, and B. V. Rangan, “Properties of geopolymer concrete with fly ash as source material: effect of mixture composition,” in Proceedings of the 7th CANMET/ACI International Conference on Recent Advances in Concrete Technology, pp. 26–29, Las Vegas, Nev, USA, 2004.
  4. V. Kumar, M. Mathur, S. S. Sinha, and S. Dhatrak, “Fly Ash: an environmental savior,” in Fly Ash Utilisation Programme (FAUP), TIFAC, DST, pp. IV1.1–IV1.4, Fly Ash India, New Delhi, India, 2005. View at Google Scholar
  5. V. M. Malhotra and A. A. Ramezanianpour, Fly Ash in Concrete, Canada Centre for Mineral and Energy Technology (CANMET), 1994.
  6. J. Davidovits, “Geopolymers: man-made geosynthesis and the resulting development of very early high strength cement,” Journal of Materials Education, vol. 16, no. 2-3, pp. 91–139, 1994. View at Google Scholar
  7. J. Davidovits, “Geopolymers—inorganic polymeric new materials,” Journal of Thermal Analysis, vol. 37, no. 8, pp. 1633–1656, 1991. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Davidovits, “Recent progresses in concretes for nuclear waste and uranium waste containment,” Concrete International Journal, vol. 16, no. 12, pp. 53–58, 1994. View at Google Scholar · View at Scopus
  9. A. K. Rai, B. Paul, and G. Singh, “A study on the environmental aspects of coal ash disposal,” Indian Journal of Environmental Protection, vol. 30, no. 12, pp. 1025–1029, 2010. View at Google Scholar · View at Scopus
  10. V. C. Pandey, J. S. Singh, R. P. Singh, N. Singh, and M. Yunus, “Arsenic hazards in coal fly ash and its fate in Indian scenario,” Resources, Conservation and Recycling, vol. 55, no. 9-10, pp. 819–835, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. N. P. Rajamane and D. Sabitha, “Effect of fly ash and silica fume on alkalinity of cement mortars,” The Indian Concrete Journal, vol. 79, no. 3, pp. 43–48, 2005. View at Google Scholar · View at Scopus
  12. S. B. Suri, “Fly ash based innovative building products for construction—part-II,” CE & CR, vol. 25, pp. 134–142, 2012. View at Google Scholar
  13. A. M. F. Jiminez, E. E. Lachowski, A. Palomo, and D. E. Macphee, “Microstructural characterisation of alkali-activated PFA matrices for waste immobilisation,” Cement and Concrete Composites, vol. 26, no. 8, pp. 1001–1006, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Davidovits, “Geopolymer chemistry and properties,” in Proceedings of the 1st European Conference on Soft Mineralurgy (Geopolymere '88), pp. 25–48, Compiegne, France, 1988.
  15. D. Hardjito, S. E. Wallah, D. M. J. Sumjouw, and B. V. Rangan, “Brief review of geopolymer concrete,” Invited Paper, George Hoff Symposium, American Concrete Institute, Los Vegas, Nev, USA, 2004. View at Google Scholar
  16. J. Fongjan and L. Ludger, “Effect of high silica content materials on fly ash-based geopolymeric cement materials,” in Proceedings of the Geopolymer 2005 World Congress: Green Chemistry and Sustainable Development Solutions, pp. 107–111, 2005.
  17. B. V. Rangan, D. Hardjito, S. E. Wallah, and D. M. J. Sumajouw, “Studies on fly ash-based geopolymer concrete,” in Proceedings of the Geopolymer 2005 World Congress: Green Chemistry and Sustainable Development Solutions, pp. 133–137, 2005.
  18. D. Hardjito, S. E. Wallah, D. M. J. Sumjouw, and B. V. Rangan, “Effect of mixing time and rest period on the engineering of fly ash-based geopolymer concrete,” in Proceedings of the Geopolymer 2005 World Congress: Green Chemistry and Sustainable Development Solutions, pp. 145–147, 2005.
  19. D. M. J. Sumajouw, D. Hardjito, S. E. Wallah, and B. V. Rangan, “Fly ash-based geopolymer concrete: an application for structural members,” in Proceedings of the Geopolymer 2005 World Congress: Green Chemistry and Sustainable Development Solutions, pp. 149–152, 2005.
  20. V. F. F. Barbosa, K. J. D. MacKenzie, and C. Thaumaturgo, “Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers,” International Journal of Inorganic Materials, vol. 2, no. 4, pp. 309–317, 2000. View at Publisher · View at Google Scholar · View at Scopus
  21. J. G. S. van Jaarsveld, J. S. J. van Deventer, and G. C. Lukey, “The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers,” Chemical Engineering Journal, vol. 89, no. 1–3, pp. 63–73, 2002. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Palomo and A. Fernandez-Jimenez, “Alkaline activation of fly ashes: manufacture of concrete not containing Portland cement,” in Proceedings of the International Conference in Institute Eduardo Torroja (CSIC '99), pp. 1–8, Madrid, Spain, 1999.
  23. R. V. Ranganath and S. Mohammed, “Some optimal values in geopolymer concrete incorporating fly ash,” The Indian Concrete Journal, vol. 82, no. 10, pp. 26–34, 2008. View at Google Scholar · View at Scopus
  24. B. M. Mustafa Al Bakri, H. Mohammed, H. Kamarudin, I. K. Niza, and Y. Zarina, “Review on fly ash based geopolymer concrete without Portland cement,” Journal of Engineering and Technology Research, vol. 3, no. 1, pp. 1–4, 2011. View at Google Scholar
  25. S. S. Jamkar, Y. M. Ghugal, and S. V. Patankar, “Effect of fineness of fly ash on flow and compressive strength of geopolymer concrete,” Indian Concrete Journal, vol. 87, no. 4, pp. 57–61, 2013. View at Google Scholar
  26. S. V. Patankar, S. S. Jamkar, and Y. M. Ghugal, “Effect of sodium hydroxide on flow and strength of fly ash based geopolymer mortar,” Journal of Structural Engineering, vol. 39, no. 1, pp. 7–12, 2012. View at Google Scholar