Table of Contents
Indian Journal of Materials Science
Volume 2015, Article ID 353617, 7 pages
http://dx.doi.org/10.1155/2015/353617
Research Article

Modification of Grout Properties in Prepacked Aggregate Concrete Incorporating Palm Oil Fuel Ash

Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor, Malaysia

Received 1 May 2015; Revised 8 June 2015; Accepted 9 June 2015

Academic Editor: Guang Ye

Copyright © 2015 Reza Hodjati et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. ASTM C618, “Standard specification for coal fly ash and raw or calcined naturalpozzolan for use mineral admixture in Portland cement concrete,” in Annual Book of ASTM Standards, 04.02, pp. 310–313, 2001. View at Google Scholar
  2. A. S. M. Abdul Awal and S. K. Nguong, “A short-term investigation on high volume palm oil fuel ash (POFA) concrete,” in Proceedings of the 35th Conferenece on our World in Concrete and Structure, pp. 185–192, 2010.
  3. M. Ahmad, R. Omar, M. Malek et al., “Compressive strength of palm oil fuel ash concrete,” in Proceedings of the International Conference on Construction and Building Technology, pp. 297–306, Kuala Lumpur, Malaysia, 2008.
  4. A. S. M. Abdul Awal and M. W. Hussin, “Effect of palm oil fuel ash in controlling heat of hydration of concrete,” Procedia Engineering, vol. 14, pp. 2650–2657, 2011. View at Publisher · View at Google Scholar
  5. S. Guirguis, Superplasticisers in Concrete, Cement and Concrete Associaton of Australia, 1980.
  6. R. Lapasin, A. Papo, and S. Rajgelj, “Flow behavior of fresh cement pastes. A comparison of different rheological instruments and techniques,” Cement and Concrete Research, vol. 13, no. 3, pp. 349–356, 1983. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Yang and H. M. Jennings, “Influences of mixing methods on the microstructure and rheological behavior of cement paste,” Advanced Cement Based Materials, vol. 2, no. 2, pp. 70–78, 1995. View at Publisher · View at Google Scholar · View at Scopus
  8. P. F. G. Banfill, “Visco metric study of cement paste containing superplasticizers with a note on experimental techniques,” Magazine of Concrete Research, vol. 33, no. 114, pp. 37–47, 1981. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Yang and H. M. Jennings, “On the development of rheological properties of cement paste during the induction period,” MRS Proceedings, vol. 289, pp. 185–190, 1992. View at Publisher · View at Google Scholar
  10. G. H. Tattersall and P. F. G. Banfill, The Rheology of Fresh Concrete, Pitman Advanced Publishing Program, Boston, Mass, USA, 1983.
  11. P. F. G. Banfill, “Structure and rheology of cement-based systems,” MRS Proceedings, vol. 289, pp. 149–160, 1992. View at Publisher · View at Google Scholar
  12. F. de Larrard and T. Sedran, “Optimization of ultra-high-performance concrete by the use of a packing model,” Cement and Concrete Research, vol. 24, no. 6, pp. 997–1009, 1994. View at Publisher · View at Google Scholar · View at Scopus
  13. G. C. Isaia, A. L. G. Gastaldini, and R. Moraes, “Physical and pozzolanic action of mineral additions on the mechanical strength of high performance concrete,” Cement and Concrete Composites, vol. 25, no. 1, pp. 69–76, 2003. View at Publisher · View at Google Scholar · View at Scopus
  14. P. K. Mehta and P.-C. C. Aietcin, “Principles underlying production of high-performance concrete,” Cement, Concrete and Aggregates, vol. 12, no. 2, pp. 70–78, 1990. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Tangpagasit, R. Cheerarot, C. Jaturapitakkul, and K. Kiattikomol, “Packing effect and pozzolanic reaction of fly ash in mortar,” Cement and Concrete Research, vol. 35, no. 6, pp. 1145–1151, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. W. Tangchirapat, C. Jaturapitakkul, and K. Kiattikomol, “Compressive strength and expansion of blended cement mortar containing palm oil fuel ash,” Journal of Materials in Civil Engineering, vol. 21, no. 8, pp. 426–431, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. V. Sata, C. Jaturapitakkul, and C. Rattanashotinunt, “Compressive strength and heat evolution of concretes containing palm oil fuel ash,” Journal of Materials in Civil Engineering, vol. 22, no. 10, pp. 1033–1038, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. W. Kroehong, T. Sinsiri, C. Jaturapitakkul, and P. Chindaprasirt, “Effect of palm oil fuel ash fineness on the microstructure of blended cement paste,” Construction and Building Materials, vol. 25, no. 11, pp. 4095–4104, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. P. Chindaprasirt, C. Jaturapitakkul, and T. Sinsiri, “Effect of fly ash fineness on microstructure of blended cement paste,” Construction and Building Materials, vol. 21, no. 7, pp. 1534–1541, 2007. View at Publisher · View at Google Scholar · View at Scopus
  20. W. Tangchirapat, T. Saeting, C. Jaturapitakkul, K. Kiattikomol, and A. Siripanichgorn, “Use of waste ash from palm oil industry in concrete,” Waste Management, vol. 27, no. 1, pp. 81–88, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. P. Chindaprasirt and S. Rukzon, “Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar,” Construction and Building Materials, vol. 22, no. 8, pp. 1601–1606, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. J. M. Khatib and S. Wild, “Pore size distribution of metakaolin paste,” Cement and Concrete Research, vol. 26, no. 10, pp. 1545–1553, 1996. View at Publisher · View at Google Scholar · View at Scopus
  23. ACI Committee 304, “Guide for the use of preplaced aggregate concrete for structural and mass concrete applications,” ACI Journal, vol. 88, no. 6, pp. 650–668, 1997. View at Google Scholar
  24. ASTM, “Standard test method for flow of grout for preplaced-aggregate concrete (flow cone method),” ASTM C939-10, ASTM International, West Conshohocken, Pa, USA, 2010. View at Google Scholar
  25. American Society For Testing and Materials, ASTM-C940 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory, American Society For Testing and Materials, West Conshohocken, Pa, USA, 2010.
  26. ASTM, “Standard test method for compressive strength of hydrauliccement mortars (using 2-in. or [50 mm] cube specimens),” in Annual Book of ASTM Standards, Volume 04.01, ASTM C109, pp. 83–88, ASTM, 2001. View at Google Scholar
  27. American Society For Testing and Materials, ASTM-C31 Standard Practice for Making and Curing Concrete Test Specimens in the Field, American Society for Testing and Materials, West Conshohocken, Pa, USA, 2012.