Table of Contents
International Journal of Nuclear Energy
Volume 2013 (2013), Article ID 950129, 7 pages
http://dx.doi.org/10.1155/2013/950129
Research Article

Detection of the Departure from Nucleate Boiling in Nuclear Fuel Rod Simulators

Nuclear Technology Development Centre (CDTN), Brazilian Nuclear Energy Commission (CNEN), Campus of UFMG, Pampulha, Belo Horizonte, MG, Brazil

Received 12 February 2013; Revised 11 May 2013; Accepted 13 May 2013

Academic Editor: Adem Acir

Copyright © 2013 Amir Zacarias Mesquita and Rogério Rivail Rodrigues. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. G. Reddy, C. F. Fighetti, and M. Merilo, “Prediction of critical beat flux in PWR fuel assemblies with non-uniform axial heat flux distribution,” in Proceedings of the 7th International Heat Transfer Conference, vol. 4, pp. 333–338, Hemisphere Publishing, München, Germany, 1982.
  2. F. J. Arias, “Film boiling in magnetic field in liquid metals with particular reference to fusion reactor project,” Journal of Fusion Energy, vol. 29, no. 2, pp. 130–133, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. D. D. Hall and I. Mudawar, “Critical heat flux (CHF) for water flow in tubes—I: compilation and assessment of world CHF data,” International Journal of Heat and Mass Transfer, vol. 43, no. 14, pp. 2573–2604, 2000. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Avery, J. J. Yang, M. Anderson, and M. Corradini, “Critical heat flux in TRIGA-fueled reactors cooled by natural convection,” Nuclear Science and Engineering, vol. 172, pp. 249–258, 2012. View at Google Scholar
  5. A. Bounakov, “Verification of calculation technique of critical heat flux In RELAP5/MOD3. 2 code applied to the MIR research reactor on experimental data obtained for the annulus at average water pressures,” Budapest, Hungary, 1998.
  6. M. Decreton, “Boiling crisis in restricted geometries with the near-by cooled wall,” in Proceedings of the 7th International Heat Transfer Conference, vol. 4, pp. 107–lll, Hemisphere Publishing, Müchen, Germany, 1982.
  7. Hewlett-Packard Company, “Displacement transducers series 7DCDT & 24DCDT,” Technical Data, Hewlett-Packard Company, Waltham, Mass, USA, 1977. View at Google Scholar