Table of Contents Author Guidelines Submit a Manuscript
International Journal of Optics
Volume 2012, Article ID 238367, 7 pages
http://dx.doi.org/10.1155/2012/238367
Research Article

Polishing Sapphire Substrates by 355 nm Ultraviolet Laser

School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510090, China

Received 15 February 2012; Revised 21 May 2012; Accepted 29 May 2012

Academic Editor: Jian Xu

Copyright © 2012 X. Wei et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Park and H. M. Chan, “A novel process for the generation of pristine sapphire surfaces,” Thin Solid Films, vol. 422, no. 1-2, pp. 135–140, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. X. Guo, X. Wei, and X. Xie, “Development of sapphire polishing technology,” Mechanical & Electrical Engineering Technology, vol. 35, no. 9, pp. 76–78, 2006. View at Google Scholar
  3. Z. Li, P. Li, J. Fan, R. Fang, and D. Zhang, “Energy accumulation effect and parameter optimization for fabricating of high-uniform and large-area period surface structures induced by femtosecond pulsed laser,” Optics and Lasers in Engineering, vol. 48, no. 1, pp. 64–68, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. I.-B. Sohn, Y.-C. Noh, S.-C. Choi, D.-K. Ko, J. Lee, and Y.-J. Choi, “Femtosecond laser ablation of polypropylene for breathable film,” Applied Surface Science, vol. 254, no. 16, pp. 4919–4924, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Folwaczny, A. Mehl, C. Haffner, and R. Hickel, “Polishing and coating of dental ceramic materials with 308 nm XeCL excimer laser radiation,” Dental Materials, vol. 14, no. 3, pp. 186–193, 1998. View at Google Scholar · View at Scopus
  6. M. Udrea, H. Orun, and A. Alacakir, “Laser polishing of optical fiber end surface,” Optical Engineering, vol. 40, no. 9, pp. 2026–2030, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. T. M. Shao, M. Hua, H. Y. Tam, and E. H. M. Cheung, “An approach to modelling of laser polishing of metals,” Surface and Coatings Technology, vol. 197, no. 1, pp. 77–84, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. X. Wei, X. Guo, and X. Xie, “Influence of the condition parameters on UV pulsed laser polishing of sapphire wafer,” in Proceedings of the 8th Pacific Rim Conference on Lasers and Electro-Optics (CLEO/Pacific Rim '09), September 2009. View at Publisher · View at Google Scholar · View at Scopus