Role of Platinum Deposited on TiO<sub>2</sub>
					 in Photocatalytic Methanol Oxidation and Dehydrogenation Reactions

Ahmed, Luma M.; Ivanova, Irina; Hussein, Falah H.; Bahnemann, Detlef W.

doi:https://doi.org/10.1155/2014/503516

International Journal of Photoenergy

On this page

Abstract Introduction Materials and Methods Results and Discussion Conclusions References Copyright Related Articles

Special Issue

TiO<sub>2</sub> Photocatalytic Materials 2014

View this Special Issue

Research Article | Open Access

Volume 2014 | Article ID 503516 | https://doi.org/10.1155/2014/503516

Role of Platinum Deposited on TiO₂ in Photocatalytic Methanol Oxidation and Dehydrogenation Reactions

Luma M. Ahmed,¹Irina Ivanova,²Falah H. Hussein,³and Detlef W. Bahnemann²

Academic Editor: Jiaguo Yu

Received30 Nov 2013

Revised04 Jan 2014

Accepted05 Jan 2014

Published20 Feb 2014

Abstract

Titania modified nanoparticles have been prepared by the photodeposition method employing platinum particles on the commercially available titanium dioxide (Hombikat UV 100). The properties of the prepared photocatalysts were investigated by means of the Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), atomic force microscopy (AFM), and UV-visible diffuse spectrophotometry (UV-Vis). XRD was employed to determine the crystallographic phase and particle size of both bare and platinised titanium dioxide. The results indicated that the particle size was decreased with the increasing of platinum loading. AFM analysis showed that one particle consists of about 9 to 11 crystals. UV-vis absorbance analysis showed that the absorption edge shifted to longer wavelength for 0.5% Pt loading compared with bare titanium dioxide. The photocatalytic activity of pure and Pt-loaded TiO₂ was investigated employing the photocatalytic oxidation and dehydrogenation of methanol. The results of the photocatalytic activity indicate that the platinized titanium dioxide samples are always more active than the corresponding bare TiO₂ for both methanol oxidation and dehydrogenation processes. The loading with various platinum amounts resulted in a significant improvement of the photocatalytic activity of TiO₂. This beneficial effect was attributed to an increased separation of the photogenerated electron-hole charge carriers.

1. Introduction

Titanium dioxide is regarded to be one of the most common photocatalysts, having a wide range of properties, such as a strong resistance to chemical and photocorrosion, strong oxidation capability, low operational temperature, low-cost, being and nontoxic [1]. These properties make TiO₂ an attractive candidate for its utilization as a photocatalyst in the photocatalytic processes. TiO₂ has been extensively studied and demonstrated to be suitable for numerous applications such as, destruction of microorganisms [2–5], inactivation of cancer cells [6, 7], protection of the skin from the sun [8–11], photocatalytic water splitting to produce hydrogen gas [12–14], manufacture of some drug types [15–17], degradation of toxic organic pollutants in water [18–20], and self-cleaning of glass and ceramic surfaces [21]. Even though TiO₂ is the most used semiconductor material, it exhibits some disadvantages, such as low surface area and fast recombination rate between the photogenerated charge carriers and the maximum absorption in the ultraviolet light region.

Different attempts have been performed to improve the efficiency of TiO₂ depressing the recombination process of the photoelectron-hole pairs. Some of them include the modification of TiO₂ surface with other semiconductors to alter the charge-transfer properties between TiO₂ and the surrounding environment [22, 23], sensitizing TiO₂ with colored inorganic or organic compounds improving its optical absorption in the visible light region [24–28], bulk modification by cation and anion doping [29–38], and fabrication of TiO₂ surface from polyhedral to produce hallow TiO₂ [39, 40]. TiO₂ nanoparticles are considered to be more active photocatalysts as compared with the bulk powder. The ratio of surface area to volume of nanoparticles has a significant effect on nanoparticles properties. This leads to a higher chemical activity and loss of magnetism and dispersibility [41].

This work was focused on the characterization of the prepared Pt-loaded TiO₂ (Hombikat UV 100) samples. Moreover, the photocatalytic oxidation and photocatalytic dehydrogenation of methanol have been studied employing both the bare and Pt-loaded TiO₂ in the O₂ and N₂ atmosphere. The methanal formation was determined using Nash method at a wavelength of 412 nm.

2. Materials and Methods

A known weight (2 g) of TiO₂ (Hombikat UV 100, Sachtleben, Germany) was suspended under continuous stirring at 250 rpm in a solution containing 40 cm³ of 40% aqueous methanal (Chemanol), 10 cm³ of methanol (Hayman), and the appropriate volume of hexachloroplatinic acid (Riedel-De-Haen AG) dissolved in HCl. The reaction mixture was maintained at 303 K, purged with nitrogen gas (20 cm³/min) and irradiated by UV-A light employing Philips Hg lamp (90 W) with the light intensity of 3.49 mW/cm² (Efbe-Schon 6 lamps) for 4 h. This period of irradiation time was found to be the most sufficient time for the complete photodeposition process of metallic platinum. The concentration of platinum was monitoring by the atomic absorption spectroscopy (Shimadzu-AA-6300, Japan). The milky white suspension turns to the pale grey colour with the deposition of Pt. The suspension solution was filtered and washed by absolute methanol, throwing in a desecrater overnight. At the end the product was dried in an oven at 100°C for 2 h [31, 32]. Band gap energies of bare and Pt (0.5)-loaded on TiO₂ surface were determined, via the measurement of reflectance data by (Cary 100 Scan) UV-visible spectrophotometer system. It is equipped, with using a Labsphere integrating sphere diffuse reflectance accessory for diffuse reflectance spectra over a range of 300–500 nm by employing BaSO₄ as reference material.

In all photocatalytic experiments, 100 cm³ of 40 mM aqueous methanol solution (HPLC grade, Sd fine-CHEM limited) was mixed with certain weight of bare TiO₂ or platinized TiO₂ and was suspended using a magnetic stirrer at 500 rpm. At different time of intervals 2.5 cm³ of reaction mixture was collected in a plastic test tube and centrifuged (4000 rpm, 15 minutes) in an 800 B centrifuge. The supernatant solution was carefully removed by a syringe to a new plastic test tube and centrifuged again to remove the fine particles of bare TiO₂ or platinized TiO₂. The concentration of formed methanal was determined spectrophotometrically at 412 nm following Nash method [42, 43] using UV-visible spectrophotometer (T80+, PG Instruments Limited, England).

3. Results and Discussion

3.1. Characterisation of Bare and Platinized TiO₂

3.1.1. FTIR Analysis

The Fourier transform infrared spectra of bare and platinized TiO₂ are depicted in Figure 1. The illustrated peaks at 3350–3450 cm⁻¹ correspond to the stretching vibration mode of O–H bonds of free water molecules and at 1620–1630 cm⁻¹ correspond to the bending vibration mode of O–H bond of chemisorbed water molecules. The absorption intensity of surface O–H groups in TiO₂ is regularly increased with the increasing of the percentage of metals content. These findings are in a good agreement with the literature data [44–46]. The broad intense band below 1200 cm⁻¹ is due to Ti–O–Ti bridging stretching mode in the crystal. This peak appeared as unsymmetrical valley with the increasing of metal loading (or content) on TiO₂ exhibiting a maximum at 580 cm⁻¹. This change is related to the formation of Ti–O–M vibrations [47, 48]. The intense bands at 3621, 3645, and 3696 cm⁻¹ in all spectra are attributed to the characteristic tetrahedral coordinated vacancies of ₄Ti⁴⁺–OH besides two bands at 3765 and 3840 cm⁻¹. These revealed that the octahedral vacancies designated as ₆Ti³⁺–OH are found. In the presence of metal loaded on TiO₂ the peaks of ₆Ti³⁺–OH are not observed. This is because the metal acts as an electron trapper, mainly preventing the formation of Ti³⁺–OH species [49]:

3.1.2. XRD Analysis

The XRD patterns of different TiO₂ samples (bare and platinum loaded) are shown in Figure 2. The mean crystallite size () of samples was calculated by Scherrer's equation (3) and the crystallite size () of samples can be estimated from plotting the modified Scherrer’s formula (4) [50] as shown in Figure 3. The corresponding values are listed in Table 1: In (3) and (4), is Scherer’s constant depending on shape of particles (0.94), is the wavelength of the X-ray radiation (0.15418 nm for ), is the full width of half maximum (FWHM) intensity (in degree which converted to radian), and is the diffraction (Bragg) angle [50, 51].

(a)

(b)

(c)

(d)

(e)

No peak was observed for Pt (0.25 wt%)/TiO₂ sample at . This result is in good agreement with the previous findings [52]. However, which is related to Pt appeared very weak band with Pt (0.5%) loading and increased for Pt (1.0%) as shown in Figure 2. The mean crystallite size of both bare and platinized TiO₂ decreased from 11.487 nm to 9.355 nm, respectively. The crystallite size of bare TiO₂ was found to be equal to 10.132 nm. This value was decreased with the increasing of Pt content on TiO₂. The decreasing of the mean particle size of platinized TiO₂ is attributed to the location and incorporation of Pt(IV) with Ti(III) in TiO₂ lattice. Moreover, the ionic radius of Pt(IV) (0.63 Å) is relatively smaller than that of Ti(III) (0.67 Å) [53, 54].

3.1.3. AFM Analysis

Figure 4 shows the three-dimensional AFM images of bare and Pt-loaded TiO₂ surface which were used to measure the particle sizes. AFM images indicate that the shapes of both bare and platinized TiO₂ are spherical. The results summarized in Tables 1 and 2 indicate that the particle sizes for all samples are found to be bigger than the values found for crystallite size. This indicates that each particle consists of several crystals (polycrystals) [55]. The values of crystal size and particle size for bare TiO₂ are more than those values for metalized TiO₂. This is related to the increasing of the number of located of Pt⁴⁺ ions in TiO₂ lattice, which depresses the growth of TiO₂ Hombikate (UV 100) nanocrystals [54]. The results show that each particle consists of about 9 to 11 crystals, according to the results obtained from the calculation of Crystallinity Index values by employing the following equation [56]: where is the particle size which is measured by AFM analysis and and are the corresponding mean crystallite size and the crystallite size calculated by the Scherrer equation and the modified Scherrer equation employing XRD data, respectively.

(a)

(b)

(c)

(d)

(e)

The maximum value of average Crystallinity index for Pt (0.5)/TiO₂ is found to be 8.168. That referred to the suppression of the crystal defects number through decreasing the amorphous phase present in TiO₂ and overall enhancing the photocatalytic activity of TiO₂ [57].

3.1.4. UV-Visible Diffuse Reflectance Spectra

The UV-vis absorbance spectra of the bare TiO₂ and platinized TiO₂ (0.5% Pt) powders were also measured to confirm the Pt-loading trend and to measure the effect of Pt loading. The results from UV-visible reflectance spectra as plotted in Figure 5 clearly show the shift of absorption edge towards longer wavelength for platinized TiO₂. These results indicate that the excitation of metalized TiO₂ occurs with the narrowing and red shift of the band gap energy () peak [58]. These results were subsequently agreed with the increasing of the average Crystallinity Index [57].

3.2. Effect of the Metal Loading on Photocatalytic Activity of Methanol Solution

The photocatalytic activity of the platinized titanium dioxide was first increased with the increasing of the metal loading until a maximum was reached with the following decrease in the activity. Figures 6 and 7 show the results obtained with the samples containing different amount of platinum. The highest photocatalytic activity was observed with the Pt loading of 0.5 wt%. This loading percentage may give the most efficient separation of photogenerated electron-hole pairs [59]. The presence of Pt on the TiO₂ surface leads to an increase of the surface barrier and the space charge region becomes narrower. As a result of the metal loading the space charge region becomes narrower leading to an increase of the efficiency of the electron-hole separation [60] and formation of the Schottky barrier by the electron transfer from the conduction band of TiO₂ to the conduction band of Pt. Thereby the recombination process is suppressed according to the following equations [31, 32, 61]: Platinum acts as electron scavenger hindering the recombination of the charge carriers and ultimately exhibiting the enhancement of the photoreactivity as shown in the following equation [31, 32, 62, 63]: However, when the percentage of the metal reached maximum, the additional amount leads to making the space charge layer very narrow. As a result the penetration depth of light exceeds the space charge layer. The recombination of the electron-hole pairs will be favorable and the photocatalytic activity will be reduced [60]. Moreover, the presence of metal on the TiO₂ surface reduces the number of the surface hydroxyl groups leading to the reduction of the photoreactivity [64]. This means that the metal on the TiO₂ surface acts both as an efficient trap site and as a recombination center at the same time [65]. Hence the rate of the methanal (HCHO) formation will be slower while the conversion of methanal to formic acid (HCOOH) is a faster process. On the other hand, with the increasing of the metal amount, TiO₂ samples will become more grey in color. Thus, the changed optical properties of the samples could lead to the screening of the light towards the TiO₂ and suppression of the electrons excitation to the conduction band [31, 66].

Two mechanisms for the photocatalytic oxidation (in the presence of O₂) and photocatalytic dehydrogenation (in the presence of N₂) of methanol with Pt (0.5)/TiO₂ are suggested as shown in Scheme 1. The scheme shows the differences between the mechanism of photooxidation and photodehydrogenation of methanol on platinized titanium dioxide. The formation of CaCO₃ in photooxidation process was indicated by passing the outlet gas in Ca(OH)₂ solution. However, no CO₂ formation was indicated in photodehydrogenation of methanol.

Differences in experimental conditions, such as, experimental equipment, type of photocatalyst, position of band edges of semiconductor compared to redox potential of O₂/ and ⁻OH/^•OH, and type and concentration of organic pollutant, cause difficulties in the comparison of photocatalytic activity of different materials. Xiang et al. [67] measured the formation rates of hydroxyl free radical for various semiconductor photocatalysts at the same experimental conditions. They discussed the difference of rates formation of hydroxyl free radical on various semiconductors. In another study Xiang et al. [68] showed that hydroxyl radicals are one of active species and indeed participate in photocatalytic reactions. They also found that the photocatalytic activity of Ag-TiO₂ exceeds that of P25 by a factor of more than 2. Our results are in good agreement with these findings.

The different yields that are suggested in the two mechanisms are HCOH and H₂O in the absence of oxygen (photocatalytic dehydrogenation of methanol) and HCOOH in the presence of oxygen (photocatalytic oxidation of methanol). The pH of the reaction suspension after one hour of irradiation was found 6.93 in dehydrogenation process while it was 4.82 in photooxidation process. This indicates the further oxidation of the formed formaldehyde to formic acid.

4. Conclusions

This study is focused on the elucidation of the mechanism of the methanol formation by the photocatalytic oxidation and/or photocatalytic dehydrogenation of aqueous methanol solution with bare and platinized TiO₂. The main conclusions can be summarized as follows.(1)The FT-IR spectra show that the peaks at 3450 cm⁻¹ and 1630 cm⁻¹ related to the surface O–H groups of TiO₂ are increased with the increasing of the platinum amount loaded on TiO₂ surface. The intense bands at 3621, 3645, and 3696 cm⁻¹ have been observed in all spectra which are characteristics for the tetrahedral coordinated vacancies designated as ₄Ti⁴⁺–OH. Additionally, a disappearance of two bands at 3765 and 3840 cm⁻¹ attributed to ₆Ti³⁺–OH has been observed as well.(2)The XRD data have been used to calculate the crystallite size of the bare and Pt-loaded TiO₂. The values obtained for the crystallite size of the bare TiO₂showed a decrease with the increasing of platinum amount on TiO₂.(3)AFM images indicate that the shapes of both bare and platinized TiO₂ are spherical.(4)One particle consists of about 9 to 11 crystals.(5)In photoreaction, no reaction occurred with using bare TiO₂ under inert gas (N₂); however, in the presence of metal, the photoreaction occurred; that is, the existence of the metal substituted the needed for the O₂. In the existence of O₂ the reaction was carried on to form formic acid as a result of further oxidation of methanol while, in the absence of the O₂, dehydrogenation of methanol occurred, and no further photooxidation occurred.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.

References

H. Yang, S. Zhu, and N. Pan, “Studying the mechanisms of titanium dioxide as ultraviolet-blocking additive for films and fabrics by an improved scheme,” Journal of Applied Polymer Science, vol. 92, no. 5, pp. 3201–3210, 2004.
View at: Publisher Site | Google Scholar
J. A. Ibáñez, M. I. Litter, and R. A. Pizarro, “Photocatalytic bactericidal effect of TiO₂ on Enterobacter cloacae. Comparative study with other Gram (-) bacteria,” Journal of Photochemistry and Photobiology A, vol. 157, no. 1, pp. 81–85, 2003.
View at: Publisher Site | Google Scholar
M. Haghi, M. Hekmatafshar, B. Mohammad Janipour et al., “Antibacterial effect of TiO₂ nanoparticles on pathogenic strain of E. coli,” International Journal of Advanced Biotechnology and Research, vol. 3, no. 3, pp. 621–624, 2012.
View at: Google Scholar
L. Zhang, J. Yan, M. Zhou, and Y. Liu, “Photocatalytic inactivation of bacteria by TiO₂-based compounds under simulated sunlight irradiation,” International Journal of Material Science, vol. 2, no. 2, pp. 43–46, 2012.
View at: Google Scholar
R. Liu, H. Wu, R. Yeh, C. Lee, and Y. Hung, “Synthesis and bactericidal ability of TiO₂ and Ag-TiO₂ prepared by coprecipitation method,” International Journal of Photoenergy, vol. 2012, Article ID 640487, 7 pages, 2012.
View at: Publisher Site | Google Scholar
A.-P. Zhang and Y.-P. Sun, “Photocatalytic killing effect of TiO₂ nanoparticles on Ls-174-t human colon carcinoma cells,” World Journal of Gastroenterology, vol. 10, no. 21, pp. 3191–3193, 2004.
View at: Google Scholar
T. Sungkaworn, W. Triampo, P. Nalakarn, I. Tang, Y. Lenburg, and P. Picha, “The Effects of TiO₂ nanoparticales on tumor cell colonies: fractal dimension and morphological properties,” International Journal of Biological and Life Sciences, vol. 2, no. 1, pp. 67–74, 2007.
View at: Google Scholar
A. Popov, TiO₂ Nanoparticles as Uv Protectors in Skin, Oulun Yliopisto, Oulu, Finland, 2008.
C.-C. Lin and W.-J. Lin, “Sun protection factor analysis of sunscreens containing titanium dioxide nanoparticles,” Journal of Food and Drug Analysis, vol. 19, no. 1, pp. 1–8, 2011.
View at: Google Scholar
S. Singh and A. pal, “Review: emergence of novel nanoparticles as Uv absorber in sunscreen and their application,” International Journal of Pharmaceutical Research & Development, vol. 4, no. 3, pp. 207–216, 2012.
View at: Google Scholar
A. P. Popov, A. V. Zvyagin, J. Lademann et al., “Designing inorganic light-protective skin nanotechnology products,” Journal of Biomedical Nanotechnology, vol. 6, no. 5, pp. 432–451, 2010.
View at: Publisher Site | Google Scholar
E. Selli, G. L. Chiarello, E. Quartarone, P. Mustarelli, I. Rossetti, and L. Forni, “A photocatalytic water splitting device for separate hydrogen and oxygen evolution,” Chemical Communications, no. 47, pp. 5022–5024, 2007.
View at: Publisher Site | Google Scholar
J. Oudenhoven, F. Scheijen, and M. Wollfs, “Fundamental of photocatalytic water splitting by visible light,” Chemistry of Catalytic System 2: Photocatalysis, pp. 1–22, 2004.
View at: Google Scholar
A. Fujishima and K. Honda, “Electrochemical photolysis of water at a semiconductor electrode,” Nature, vol. 238, no. 5358, pp. 37–38, 1972.
View at: Publisher Site | Google Scholar
M. Del Arco, S. Gutiérrez, C. Martín, V. Rives, and J. Rocha, “Synthesis and characterization of layered double hydroxides (LDH) intercalated with non-steroidal anti-inflammatory drugs (NSAID),” Journal of Solid State Chemistry, vol. 177, no. 11, pp. 3954–3962, 2004.
View at: Publisher Site | Google Scholar
H. Zhang, K. Zou, S. Guo, and X. Duan, “Nanostructural drug-inorganic clay composites: structure, thermal property and in vitro release of captopril-intercalated Mg-Al-layered double hydroxides,” Journal of Solid State Chemistry, vol. 179, no. 6, pp. 1792–1801, 2006.
View at: Publisher Site | Google Scholar
S.-J. Xia, Z.-M. Ni, Q. Xu, B.-X. Hu, and J. Hu, “Layered double hydroxides as supports for intercalation and sustained release of antihypertensive drugs,” Journal of Solid State Chemistry, vol. 181, no. 10, pp. 2610–2619, 2008.
View at: Publisher Site | Google Scholar
F. Hussein, “Comparison between solar and artificial photocatalytic decolorization of textile industrial wastewater,” International Journal of Photoenergy, vol. 2012, Article ID 793648, 10 pages, 2012.
View at: Publisher Site | Google Scholar
S. Devipriya, S. Yesodharan, and E. Yesodharan, “Solar photocatalytic removal of chemical and bacterial pollutants from water using Pt/TiO₂ -coated ceramic tiles,” Journal of Photoenergy, vol. 2012, Article ID 970474, 8 pages, 2012.
View at: Publisher Site | Google Scholar
Y. Tan, C. Wong, and A. Mohamed, “An overview on the photocatalytic activity of nano-doped-TiO₂ in the degradation of organic pollutants,” Materials Science, vol. 2011, Article ID 261219, 18 pages, 2011.
View at: Publisher Site | Google Scholar
D. Verhovšek, N. Veronovski, U. L. štangar, M. Kete, K. žagar, and M. Čeh, “The synthesis of anatase nanoparticles and the preparation of photocatalytically active coatings based on wet chemicalMethods for self-cleaning applications,” International Journal of Photoenergy, vol. 2012, Article ID 329796, 10 pages, 2012.
View at: Publisher Site | Google Scholar
H.-X. Tong, Q.-Y. Chen, Z.-L. Yin, H.-P. Hu, D.-X. Wu, and Y.-H. Yang, “Preparation, characterization and photo-catalytic behavior of WO₃-TiO₂ catalysts with oxygen vacancies,” Transactions of Nonferrous Metals Society of China, vol. 19, no. 6, pp. 1483–1488, 2009.
View at: Publisher Site | Google Scholar
M. Kim, J. Choi, T. Toops et al., “Coating SiO₂ support with TiO₂ or ZrO₂ and effects on structure and CO oxidation performance of Pt catalyst,” Catalysts, vol. 3, no. 1, pp. 88–103, 2013.
View at: Publisher Site | Google Scholar
F. Hussein and A. Halbus, “Rapid decolorization of cobalamin,” International Journal of PhotoenergyInternational Journal of Photoenergy, vol. 2012, Article ID 495435, 9 pages, 2012.
View at: Publisher Site | Google Scholar
E. Adamek, W. Baran, J. Ziemianska, and A. Sobczak, “The comparison of photocatalytic degradation and decolorization processes of dyeing effluents,” International Journal of Photoenergy, vol. 2013, Article ID 578191, 11 pages, 2013.
View at: Publisher Site | Google Scholar
F. Hussein and T. Abass, “Photocatalytic treatment of textile industrial wastewater,” International Journal of Chemical Sciences, vol. 8, no. 3, pp. 1353–1364, 2010.
View at: Google Scholar
F. Hussein and T. Abass, “Solar photocatalysis and photocatalytic treatment of textile industrial wastewater,” International Journal of Chemical Sciences, vol. 8, no. 3, pp. 1409–1420, 2010.
View at: Google Scholar
F. Hussein, M. Obies, and A. Drea, “Photocatalytic decolorization of bismark brown R by suspension of titanium dioxide,” International Journal of Chemical Sciences, vol. 8, no. 4, pp. 2736–2746, 2010.
View at: Google Scholar
L. Wen, B. Liu, X. Zhao, K. Nakata, T. Murakami, and A. Fujishima, “Synthesis, characterization, and photocatalysis of Fe-doped TiO₂: a combined experimental and Theoretical Study,” International Journal of Photoenergy, vol. 2012, Article ID 368750, 10 pages, 2012.
View at: Publisher Site | Google Scholar
M. Shaddad, A. Al-Mayouf, M. Ghanem, M. AlHoshan, J. Singh, and A. Al-Suhybani, “Chemical deposition and electrocatalytic activity of platinum nanoparticles supported on TiO₂ Nanotubes,” International Journal of Electrochemical Science, vol. 8, pp. 2468–2478, 2013.
View at: Google Scholar
L. Ahmed, F. Hussein, and A. Mahdi, “Photocatalytic dehydrogenation of aqueous methanol solution by bare and platinized TiO₂ nanoparticles,” Asian Journal of Chemistry, vol. 24, no. 12, pp. 5564–5568, 2012.
View at: Google Scholar
F. H. Hussein and R. Rudham, “Photocatalytic dehydrogenation of liquid propan-2-ol by platinized anatase and other catalysts,” Journal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases, vol. 80, no. 10, pp. 2817–2825, 1984.
View at: Publisher Site | Google Scholar
F. H. Hussein and R. Rudham, “Photocatalytic dehydrogenation of liquid alcohols by platinized anatase,” Journal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases, vol. 83, no. 5, pp. 1631–1639, 1987.
View at: Publisher Site | Google Scholar
W. Shi, W. Yang, Q. Li, S. Gao, P. Shang, and J. Shang, “The synthesis of nitrogen/sulfur co-doped TiO₂ nanocrystals with a high specific surface areaand a high percentage of {001} facets and their enhanced visible-light photocatalytic performance,” Nanoscale Research Letters, vol. 7, pp. 1–9, 2012.
View at: Google Scholar
V. Štengl and T. M. Grygar, “The simplest way to iodine-doped anatase for photocatalysts activated by visible light,” International Journal of Photoenergy, vol. 2011, Article ID 685935, 13 pages, 2011.
View at: Publisher Site | Google Scholar
A. A. Ismail, D. W. Bahnemann, L. Robben, V. Yarovyi, and M. Wark, “Palladium doped porous titania photocatalysts: impact of mesoporous order and crystallinity,” Chemistry of Materials, vol. 22, no. 1, pp. 108–116, 2010.
View at: Publisher Site | Google Scholar
K. Cheng, W. Sun, H. Jiang, J. Liu, and J. Lin, “Sonochemical deposition of Au nanoparticles on different facets-dominated anatase TiO₂ single crystals and resulting photocatalytic performance,” The Journal of Physical Chemistry C, vol. 117, pp. 14600–14607, 2013.
View at: Google Scholar
G. Dai, S. Liua, Y. Lianga, H. Liua, and Z. Zhong, “A simple preparation of carbon and nitrogen co-doped nanoscaled TiO₂ with exposed {0 0 1} facets for enhanced visible-light photocatalytic activity,” Journal of Molecular Catalysis A, vol. 368-369, pp. 38–42, 2013.
View at: Google Scholar
S. Liu, J. Yu, and M. Jaroniec, “Tunable photocatalytic selectivity of hollow TiO₂ microspheres composed of anatase polyhedra with exposed {001} facets,” Journal of the American Chemical Society, vol. 132, no. 34, pp. 11914–11916, 2010.
View at: Publisher Site | Google Scholar
J. Yu, W. Liu, and H. Yu, “A one-pot approach to hierarchically nanoporous titania hollow microspheres with high photocatalytic activity,” Crystal Growth and Design, vol. 8, no. 3, pp. 930–934, 2008.
View at: Publisher Site | Google Scholar
A. H. Lu, E. L. Salabas, and F. Schüth, “Magneticnanoparticles: synthesis, protection, functionalization, and application,” Angewandte Chemie International Edition, vol. 46, no. 8, pp. 1222–1244, 2007.
View at: Publisher Site | Google Scholar
T. Nash, “The colorimetric estimation of formaldehyde by means of the Hantzsch reaction,” The Biochemical journal, vol. 55, no. 3, pp. 416–421, 1953.
View at: Google Scholar
C. Castell and B. Smith, “Measurement of formaldehyde in fish muscle using TCA extraction and Nash reagent,” Journal Fisheries Research Board of Canada, vol. 30, no. 1, pp. 91–98, 1973.
View at: Publisher Site | Google Scholar
M. Hamadanian, A. Reisi-Vanani, and A. Majedi, “Sol-gel preparation and characterization of Co/TiO₂ nanoparticles: application to the degradation of methyl orange,” Journal of the Iranian Chemical Society, vol. 7, no. 1, pp. S52–S58, 2010.
View at: Google Scholar
J. Cai, J. Huang, H. Yu, and L. Ji, “Synthesis, characterization, and photocatalytic activity of TiO₂ microspheres functionalized with porphyrin,” International Journal of Photoenergy, vol. 2012, Article ID 348292, 10 pages, 2012.
View at: Publisher Site | Google Scholar
K. Rahulan, S. Ganesan, and P. Aruna, “Synthesis and optical limiting studies of Au-doped TiO₂ nanoparticles,” Advances in Natural Sciences: Nanoscience and Nanotechnology, vol. 2, pp. 1–6, 2011.
View at: Google Scholar
K. Jackson, “7. A guide to identifying common inorganic fillers and activators using vibrational spectroscopy,” The Internet Journal of Vibrational Spectroscopy, vol. 3, no. 3, pp. 1–12, 2004.
View at: Google Scholar
P. M. Kumar, S. Badrinarayanan, and M. Sastry, “Nanocrystalline TiO₂ studied by optical, FTIR and X-ray photoelectron spectroscopy: correlation to presence of surface states,” Thin Solid Films, vol. 358, no. 1, pp. 122–130, 2000.
View at: Publisher Site | Google Scholar
J. J. Murcia, M. C. Hidalgo, J. A. Navío, V. Vaiano, P. Ciambelli, and D. Sannino, “Photocatalytic ethanol oxidative dehydrogenation over Pt/TiO₂: effect of the addition of blue phosphors,” International Journal of Photoenergy, vol. 2012, Article ID 687262, 2012.
View at: Publisher Site | Google Scholar
A. Monshi, M. Foroughi, and M. Monshi, “Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD,” World Journal of Nano Science and Engineering, vol. 2, pp. 154–160, 2012.
View at: Publisher Site | Google Scholar
D. Moore and R. Reynolds, X-Ray Diffraction and the Identification and Analysis of Clay Minerals, Oxford University Press, Oxford, UK, 2nd edition, 1997.
B. Kouakou, L. Ouattara, A. Trokourey, and Y. Bokra, “Characterization of thermal prepared platinized tin dioxide electrodes: application to methanol electro-oxidation,” Journal of Applied Sciences and Environmental Management, vol. 12, no. 4, pp. 103–110, 2008.
View at: Google Scholar
U. M. űller, Inorganic Structural Chemistry, John Wiley & Sons Ltd, England, UK, 2nd edition, 2006.
B. Yarmand and S. K. Sadrnezhaad, “Structural and optical properties of Pd²⁺-doped mesoporous TiO₂ thin films prepared by sol-gel templating technique,” Optoelectronics and Advanced Materials, Rapid Communications, vol. 4, no. 10, pp. 1572–1577, 2010.
View at: Google Scholar
D. Ozkaya, “Particle size analysis of supported platinum catalysts by TEM,” Platinum Metals Review, vol. 52, no. 1, pp. 61–62, 2008.
View at: Publisher Site | Google Scholar
X. Pan, I. Medina-Ramirez, R. Mernaugh, and J. Liu, “Nanocharacterization and bactericidal performance of silver modified titania photocatalyst,” Colloids and Surfaces B, vol. 77, no. 1, pp. 82–89, 2010.
View at: Publisher Site | Google Scholar
K. Eufinger, D. Poelman, H. Poelman, R. De Gryse, and G. Marin, “TiO₂ thin films for photocatalytic applications,” in Thin Solid Films: Process and Applications, S. Nam, Ed., pp. 189–227, 2008.
View at: Google Scholar
N. Venkatachalam, M. Palanichamy, and V. Murugesan, “Sol-gel preparation and characterization of nanosize TiO₂: its photocatalytic performance,” Materials Chemistry and Physics, vol. 104, no. 2-3, pp. 454–459, 2007.
View at: Publisher Site | Google Scholar
Y. Wang, H. Cheng, L. Zhang et al., “The preparation, characterization, photoelectrochemical and photocatalytic properties of lanthanide metal-ion-doped TiO₂ nanoparticles,” Journal of Molecular Catalysis A, vol. 151, no. 1-2, pp. 205–216, 2000.
View at: Publisher Site | Google Scholar
A.-W. Xu, Y. Gao, and H.-Q. Liu, “The preparation, characterization, and their photocatalytic activities of rare-earth-doped TiO₂ nanoparticles,” Journal of Catalysis, vol. 207, no. 2, pp. 151–157, 2002.
View at: Publisher Site | Google Scholar
B. K. Vijayan, N. M. Dimitrijevic, J. Wu, and K. A. Gray, “The effects of Pt doping on the structure and visible light photoactivity of titania nanotubes,” Journal of Physical Chemistry C, vol. 114, no. 49, pp. 21262–21269, 2010.
View at: Publisher Site | Google Scholar
J. Galvez and S. Rodriguez, Solar Detoxification, United Nations Educational, Scientific and Cultural Organization, Spine, 1st edition, 2003.
J. S. Jang, P. H. Borse, J. S. Lee et al., “Photocatalytic hydrogen production in water-methanol mixture over iron-doped CaTiO₃,” Bulletin of the Korean Chemical Society, vol. 32, no. 1, pp. 95–99, 2011.
View at: Publisher Site | Google Scholar
W. Choi, A. Termin, and M. R. Hoffmann, “The role of metal ion dopants in quantum-sized TiO₂: correlation between photoreactivity and charge carrier recombination dynamics,” Journal of Physical Chemistry, vol. 98, no. 51, pp. 13669–13679, 1994.
View at: Google Scholar
L. Wang and T. Egerton, “The effect of transition metal on the optical properties and photoactivity of nanoparticulate titanium dioxide,” Journal of Materials Science Research, vol. 1, no. 4, pp. 17–27, 2012.
View at: Google Scholar
B. Neppolian, H. Jung, and H. Choi, “Photocatalytic degradation of 4-chlorophenol using TiO₂ and Pt-TiO₂ nanoparticles prepared by sol-gel method,” Journal of Advanced Oxidation Technologies, vol. 10, no. 2, pp. 369–374, 2007.
View at: Google Scholar
Q. Xiang, J. Yu, and P. K. Wong, “Quantitative characterization of hydroxyl radicals produced by various photocatalysts,” Journal of Colloid and Interface Science, vol. 357, no. 1, pp. 163–167, 2011.
View at: Publisher Site | Google Scholar
Q. Xiang, J. Yu, B. Cheng, and H. C. Ong, “Microwave-hydrothermal preparation and visible-light photoactivity of plasmonic photocatalyst Ag-TiO₂ nanocomposite hollow spheres,” Chemistry: An Asian Journal, vol. 5, no. 6, pp. 1466–1474, 2010.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2014 Luma M. Ahmed et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

5557

Downloads

2225

Citations