- About this Journal ·
- Abstracting and Indexing ·
- Aims and Scope ·
- Annual Issues ·
- Article Processing Charges ·
- Articles in Press ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
International Journal of Polymer Science
Volume 2011 (2011), Article ID 964193, 10 pages
http://dx.doi.org/10.1155/2011/964193
A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding
1Department of Mechanical Engineering, Chair on Composites of High Performance (CCHP), Research Centre on Plastics and Composites (CREPEC), Ecole Polytechnique de Montréal, P.O. Box 6079, Station Centre-Ville, Montreal, QC, Canada H3C 3A7
2Centre for Advanced Composite Materials, Department of Engineering, University of Auckland, Private Bag 92019, Auckland 1142, New Zealand
Received 1 March 2011; Accepted 3 May 2011
Academic Editor: Susheel Kalia
Copyright © 2011 Farida Bensadoun et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Farida Bensadoun, Nadir Kchit, Catherine Billotte, Simon Bickerton, François Trochu, and Edu Ruiz, “A Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding,” International Journal of Polymer Science, vol. 2011, Article ID 964193, 10 pages, 2011. doi:10.1155/2011/964193