Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2014 (2014), Article ID 464806, 11 pages
http://dx.doi.org/10.1155/2014/464806
Research Article

Synthesis of Fluorinated Amphiphilic Block Copolymers Based on PEGMA, HEMA, and MMA via ATRP and CuAAC Click Chemistry

1Department of Chemistry, Faculty of Arts and Science, Yildiz Technical University, Davutpasa Campus, Esenler, 34220 Istanbul, Turkey
2Department of Chemistry, Faculty of Arts and Science, Fatih University, Buyukcekmece, 34500 Istanbul, Turkey
3Department of Chemistry, Medical Laboratory Techniques, Vocational School of Medical Sciences, Fatih University, Maltepe, 34840 Istanbul, Turkey
4Department of Chemical Engineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, Davutpasa Campus, Esenler, 34220 Istanbul, Turkey

Received 6 May 2014; Accepted 27 July 2014; Published 19 August 2014

Academic Editor: Ali Akbar Entezami

Copyright © 2014 Fatime Eren Erol et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Jiang, L. Zhang, J. Shi et al., “Synthesis, characterization and bulk properties of well-defined poly(hexafluorobutyl methacrylate)-block-poly(glycidyl methacrylate) via consecutive ATRP,” Journal of Fluorine Chemistry, vol. 153, pp. 74–81, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. M. P. Krafft, “Controlling phospholipid self-assembly and film properties using highly fluorinated components—fluorinated monolayers, vesicles, emulsions and microbubbles,” Biochimie, vol. 94, no. 1, pp. 11–25, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. E. Amado and J. Kressler, “Triphilic block copolymers with perfluorocarbon moieties in aqueous systems and their biochemical perspectives,” Soft Matter, vol. 7, no. 16, pp. 7144–7149, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Nakahara, M. Tsuji, Y. Sato, M. P. Krafft, and O. Shibata, “Langmuir monolayer miscibility of single-chain partially fluorinated amphiphiles with tetradecanoic acid,” Journal of Colloid and Interface Science, vol. 337, no. 1, pp. 201–210, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Broniatowski and P. Dynarowicz-Łatka, “Semifluorinated alkanes—primitive surfactants of fascinating properties,” Advances in Colloid and Interface Science, vol. 138, no. 2, pp. 63–83, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. M. P. Krafft, “Fluorocarbons and fluorinated amphiphiles in drug delivery and biomedical research,” Advanced Drug Delivery Reviews, vol. 47, no. 2-3, pp. 209–228, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. K. K. Goli, O. J. Rojas, and J. Genzer, “Formation and antifouling properties of amphiphilic coatings on polypropylene fibers,” Biomacromolecules, vol. 13, no. 11, pp. 3769–3779, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Peng, K. J. Thurecht, I. Blakey, E. Taran, and A. K. Whittaker, “Effect of solvent quality on the solution properties of assemblies of partially fluorinated amphiphilic diblock copolymers,” Macromolecules, vol. 45, no. 21, pp. 8681–8690, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. P. Scholtysek, Z. Li, J. Kressler, and A. Blume, “Interactions of DPPC with semitelechelic poly(glycerol methacrylate)s with perfluoroalkyl end groups,” Langmuir, vol. 28, no. 44, pp. 15651–15662, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. Z. Zhao, H. Ni, Z. Han et al., “Effect of surface compositional heterogeneities and microphase segregation of fluorinated amphiphilic copolymers on antifouling performance,” ACS Applied Materials and Interfaces, vol. 5, no. 16, pp. 7808–7818, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Bruno, “Controlled radical (Co)polymerization of fluoromonomers,” Macromolecules, vol. 43, no. 24, pp. 10163–10184, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. N. M. L. Hansen, K. Jankova, and S. Hvilsted, “Fluoropolymer materials and architectures prepared by controlled radical polymerizations,” European Polymer Journal, vol. 43, no. 2, pp. 255–293, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Chakrabarty and N. K. Singha, “Tailor-made polyfluoroacrylate and its block copolymer by RAFT polymerization in miniemulsion; improved hydrophobicity in the core-shell block copolymer,” Journal of Colloid and Interface Science, vol. 408, pp. 66–74, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. J. M. Bak and H. Lee, “Novel thermoresponsive fluorinated double-hydrophilic poly{[N-(2,2- difluoroethyl)acrylamide]-b-[N-(2-fluoroethyl)acrylamide]} block copolymers,” Journal of Polymer Science A: Polymer Chemistry, vol. 51, no. 9, pp. 1976–1982, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. T. L. Bucholz and Y. Loo, “Phase behavior of near-monodisperse semifluorinated diblock copolymers by atom transfer radical polymerization,” Macromolecules, vol. 39, no. 18, pp. 6075–6080, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. G.-D. Fu, Z.-L. Yuan, E.-T. Kang, K.-G. Neoh, D. M. Lai, and A. C. H. Huan, “Nanoporous ultra-low-dielectric-constant fluoropolymer films via selective UV decomposition of poly(pentafluorostyrene)-block-poly(methyl methacrylate) copolymers prepared using atom transfer radical polymerization,” Advanced Functional Materials, vol. 15, no. 2, pp. 315–322, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. W. Guo, X. Tang, J. Xu et al., “Synthesis, characterization, and property of amphiphilic fluorinated abc-type triblock copolymers,” Journal of Polymer Science A: Polymer Chemistry, vol. 49, no. 7, pp. 1528–1534, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. E. Martinelli, S. Agostini, G. Galli et al., “Nanostructured films of amphiphilic fluorinated block copolymers for fouling release application,” Langmuir, vol. 24, no. 22, pp. 13138–13147, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. G. P. He, G. W. Zhang, J. P. Hu et al., “Low-fluorinated homopolymer from heterogeneous ATRP of 2,2,2-trifluoroethyl methacrylate mediated by copper complex with nitrogen-based ligand,” Journal of Fluorine Chemistry, vol. 132, no. 9, pp. 562–572, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. N. M. L. Hansen, M. Gerstenberg, D. M. Haddleton, and S. Hvilsted, “Synthesis, characterization, and bulk properties of amphiphilic copolymers containing fluorinated methacrylates from sequential copper-mediated radical polymerization,” Journal of Polymer Science A: Polymer Chemistry, vol. 46, no. 24, pp. 8097–8111, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. N. M. L. Hansen, D. M. Haddleton, and S. Hvilsted, “Fluorinated bio-acceptable polymers via an ATRP macroinitiator approach,” Journal of Polymer Science A: Polymer Chemistry, vol. 45, no. 24, pp. 5770–5780, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Chen, L. Chen, H. Nie, E. T. Kang, and R. H. Vora, “Fluorinated polyimides grafted with poly(ethylene glycol) side chains by the RAFT-mediated process and their membranes,” Materials Chemistry and Physics, vol. 94, no. 2-3, pp. 195–201, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. D. Burger, J. Gisin, and E. Bartsch, “Synthesis of sterically stabilized perfluorinated aqueous latices,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 442, pp. 123–131, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Liu, J. Y. Lee, E. T. Kang, P. Wang, and K. L. Tan, “Synthesis, characterization and electrochemical transport properties of the poly(ethyleneglycol)-grafted poly(vinylidenefluoride) nanoporous membranes,” Reactive and Functional Polymers, vol. 47, no. 3, pp. 201–213, 2001. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Wang, K. L. Tan, and E. T. Kang, “Surface modification of poly(tetrafluoroethylene) films via grafting of poly(ethylene glycol) for reduction in protein adsorption,” Journal of Biomaterials Science, Polymer Edition, vol. 11, no. 2, pp. 169–186, 2000. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. Nakayama, M. Miyamura, Y. Hirano, K. Goto, and T. Matsuda, “Preparation of poly(ethylene glycol)-polystyrene block copolymers using photochemistry of dithiocarbamate as a reduced cell-adhesive coating material,” Biomaterials, vol. 20, no. 10, pp. 963–970, 1999. View at Publisher · View at Google Scholar · View at Scopus
  27. G. D. Fu, Z. H. Shang, L. Hong, E. T. Kang, and K. G. Neoh, “Nanoporous, ultralow-dielectric-constant fluoropolymer films from agglomerated and crosslinked hollow nanospheres of poly(pentafluorostyrene)-block-poly(divinylbenzene),” Advanced Materials, vol. 17, no. 21, pp. 2622–2626, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Paz-Pazos and C. Pugh, “Synthesis of optically active copolymers of 2,3,4,5, 6-pentafluorostyrene and β-pinene with low surface energies,” Journal of Polymer Science A: Polymer Chemistry, vol. 44, no. 9, pp. 3114–3124, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. A. M. Granville, S. G. Boyes, B. Akgun, M. D. Foster, and W. J. Brittain, “Thermoresponsive behavior of semifluorinated polymer brushes,” Macromolecules, vol. 38, no. 8, pp. 3263–3270, 2005. View at Publisher · View at Google Scholar · View at Scopus
  30. H. C. Kolb, M. G. Finn, and K. B. Sharpless, “Click chemistry: diverse chemical function from a few good reactions,” Angewandte Chemie—International Edition, vol. 40, no. 11, pp. 2004–2021, 2001. View at Google Scholar
  31. V. V. Rostovtsev, G. Green, V. V. Fokin, and K. B. Sharpless, “A stepwise huisgen cycloaddition process: copper(I)-catalyzed regioselective ligation of azides and terminal alkynes,” Angewandte Chemie International Edition, vol. 41, no. 14, pp. 2596–2599, 2002. View at Google Scholar
  32. M. Ergin, B. Kiskan, B. Gacal, and Y. Yagci, “Thermally curable polystyrene via click chemistry,” Macromolecules, vol. 40, no. 13, pp. 4724–4727, 2007. View at Publisher · View at Google Scholar · View at Scopus
  33. G. D. Fu, E. T. Kang, and K. G. Neoh, “Three-dimensionally ordered porous membranes prepared via self-assembly and reverse micelle formation from well-defined amphiphilic block copolymers,” Langmuir, vol. 21, no. 8, pp. 3619–3624, 2005. View at Publisher · View at Google Scholar · View at Scopus
  34. M. Degirmenci and N. Genli, “Synthesis of well-defined telechelic macrophotoinitiator of polystyrene by combination of ATRP and click chemistry,” Macromolecular Chemistry and Physics, vol. 210, no. 19, pp. 1617–1623, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. D. Sinirlioglu and A. E. Muftuoglu, “Synthesis of an inorganic-organic hybrid material based on polyhedral oligomeric silsesquioxane and polystyrene via nitroxide-mediated polymerization and click reactions,” Designed Monomers and Polymers, vol. 14, no. 3, pp. 273–286, 2011. View at Publisher · View at Google Scholar · View at Scopus
  36. O. Eren, M. Gorur, B. Keskin, and F. Yilmaz, “Synthesis and characterization of ferrocene end-capped poly(ε-caprolactone)s by a combination of ring-opening polymerization and “click” chemistry techniques,” Reactive and Functional Polymers, vol. 73, no. 1, pp. 244–253, 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. S. Arifuzzaman, A. E. Özçam, K. Efimenko, D. A. Fischer, and J. Genzer, “Formation of surface-grafted polymeric amphiphilic coatings comprising ethylene glycol and fluorinated groups and their response to protein adsorption,” Biointerphases, vol. 4, no. 2, pp. FA33–FA44, 2009. View at Publisher · View at Google Scholar · View at Scopus
  38. E. Vargün, M. Sankir, B. Aran, N. D. Sankir, and A. Usanmaz, “Synthesis and characterization of 2-hydroxyethyl methacrylate (HEMA) and methyl methacrylate (MMA) l,” Journal of Macromolecular Science A: Pure and Applied Chemistry, vol. 47, no. 3, pp. 235–240, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. M. M. Ali and H. D. H. Stöver, “Well-defined amphiphilic thermosensitive copolymers based on poly(ethylene glycol monomethacrylate) and methyl methacrylate prepared by atom transfer radical polymerization,” Macromolecules, vol. 37, no. 14, pp. 5219–5227, 2004. View at Publisher · View at Google Scholar · View at Scopus
  40. B. H. Tan, H. Hussain, Y. Liu, C. B. He, and T. P. Davis, “Synthesis and self-assembly of brush-type poly[poly(ethylene glycol)methyl ether methacrylate]-block-poly(pentafluorostyrene) amphiphilic diblock copolymers in aqueous solution,” Langmuir, vol. 26, no. 4, pp. 2361–2368, 2010. View at Publisher · View at Google Scholar · View at Scopus
  41. B. Kim, H. Lee, S. Jeong, J. Lee, and H. Paik, “Amphiphilic gradient copolymer of [poly(ethylene glycol) methyl ether] methacrylate and styrene via atom transfer radical polymerization,” Macromolecular Research, vol. 19, no. 12, pp. 1257–1263, 2011. View at Publisher · View at Google Scholar · View at Scopus
  42. M. Degirmenci and N. Genli, “Synthesis of poly(cyclohexene oxide)-block-polystyrene by combination of radical-promoted cationic polymerization, atom transfer radical polymerization and click chemistry,” Polymer International, vol. 59, no. 6, pp. 859–866, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. O. Karagollu, M. Gorur, F. Gode, B. Sennik, and F. Yilmaz, “Phosphate ion sensors based on triazole connected ferrocene moieties,” Sensors and Actuators B, vol. 193, pp. 788–798, 2014. View at Google Scholar
  44. K. T. Powell, C. Cheng, K. L. Wooley, A. Singh, and M. W. Urban, “Complex amphiphilic networks derived from diamine-terminated poly(ethylene glycol) and benzylic chloride-functionalized hyperbranched fluoropolymers,” Journal of Polymer Science A: Polymer Chemistry, vol. 44, no. 16, pp. 4782–4794, 2006. View at Publisher · View at Google Scholar · View at Scopus