Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2015, Article ID 234690, 8 pages
http://dx.doi.org/10.1155/2015/234690
Research Article

Recovery and Modification of Waste Tire Particles and Their Use as Reinforcements of Concrete

1Facultad de Química, Universidad Autónoma del Estado de México, Paseo Colón Esquina Paseo Tollocan S/N, 50180 Toluca, MEX, Mexico
2Laboratorio de Investigación y Desarrollo de Materiales Avanzados (LIDMA), Facultad de Química, Universidad Autónoma del Estado de México, Km 12 de la Carretera Toluca-Atlacomulco, 50200 San Cayetano, MEX, Mexico
3Centro Conjunto de Investigación en Química Sustentable, Universidad Autónoma del Estado de México-Universidad Nacional Autónoma de México (UAEM-UNAM), Carretera Toluca-Atlacomulco, Km 14.5, Unidad El Rosedal, 50200 Toluca, MEX, Mexico
4Unidad de Irradiación y Seguridad Radiológica, Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, A.P. 70-543, 04510 Mexico, DF, Mexico
5Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca S/N, La Marquesa, 52750 Ocoyoacac, MEX, Mexico

Received 5 May 2015; Accepted 22 June 2015

Academic Editor: Angel Concheiro

Copyright © 2015 Eduardo Sadot Herrera-Sosa et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Á. Uruburu, E. Ponce-Cueto, J. R. Cobo-Benita, and J. Ordieres-Meré, “The new challenges of end-of-life tyres management systems: a Spanish case study,” Waste Management, vol. 33, no. 3, pp. 679–688, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Siddique and T. R. Naik, “Properties of concrete containing scrap-tire rubber—an overview,” Waste Management, vol. 24, no. 6, pp. 563–569, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Karger-Kocsis, “Editorial corner—a personal view: waste tyre rubber—what to do next?” Express Polymer Letters, vol. 7, no. 5, article 406, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Mis-Fernandez, J. A. Azamar-Barrios, and C. R. Rios-Soberanis, “Characterization of the powder obtained from wasted tires reduced by pyrolysis and thermal shock process,” Journal of Applied Research and Technology, vol. 6, no. 2, pp. 95–105, 2008. View at Google Scholar · View at Scopus
  5. Ch.-T. Chiu, “Use of ground tire rubber in asphalt pavements: field trial and evaluation in Taiwan,” Resources, Conservation and Recycling, vol. 52, no. 3, pp. 522–532, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. K. Neocleous, H. Tlemat, and K. Pilakoutas, “Design issues for concrete reinforced with steel fibers, including fibers recovered from used tires,” Journal of Materials in Civil Engineering, vol. 18, no. 5, pp. 677–685, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. M. A. Aiello, F. Leuzzi, G. Centonze, and A. Maffezzoli, “Use of steel fibres recovered from waste tyres as reinforcement in concrete: pull-out behaviour, compressive and flexural strength,” Waste Management, vol. 29, no. 6, pp. 1960–1970, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Tlemat, K. Pilakoutas, and K. Neocleous, “Demonstrating steel fibres from waste tyres as reinforcement in concrete: material characterisation,” in Proceedings of the 1st International Conference on Innovative Materials and Technologies for Construction and Restoration, Liguori, Ed., vol. 1, pp. 172–185, Varenna, Italy, June 2004.
  9. K. Neocleous, K. Pilakoutas, and P. Waldron, “From used tyres to concrete fibre reinforcement,” in Proceedings of the 2nd FIB Congress, Naples, Italy, June 2006.
  10. I. B. Topçu, “The properties of rubberized concretes,” Cement and Concrete Research, vol. 25, no. 2, pp. 304–310, 1995. View at Publisher · View at Google Scholar · View at Scopus
  11. I. B. Topçu and N. Avcular, “Collision behaviours of rubberized concrete,” Cement and Concrete Research, vol. 27, no. 12, pp. 1893–1898, 1997. View at Publisher · View at Google Scholar · View at Scopus
  12. B. S. Mohammed, K. M. Anwar Hossain, J. T. Eng Swee, G. Wong, and M. Abdullahi, “Properties of crumb rubber hollow concrete block,” Journal of Cleaner Production, vol. 23, no. 1, pp. 57–67, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. F. Pelisser, N. Zavarise, T. A. Longo, and A. M. Bernardin, “Concrete made with recycled tire rubber: effect of alkaline activation and silica fume addition,” Journal of Cleaner Production, vol. 19, no. 6-7, pp. 757–763, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Bravo and J. de Brito, “Concrete made with used tyre aggregate: durability-related performance,” Journal of Cleaner Production, vol. 25, pp. 42–50, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. A. Benazzouk, O. Douzane, T. Langlet, K. Mezreb, J. M. Roucoult, and M. Quéneudec, “Physico-mechanical properties and water absorption of cement composite containing shredded rubber wastes,” Cement and Concrete Composites, vol. 29, no. 10, pp. 732–740, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. M. M. Al-Tayeb, B. H. Abu Bakar, H. M. Akil, and H. Ismail, “Effect of partial replacements of sand and cement by waste rubber on the fracture characteristics of concrete,” Polymer—Plastics Technology and Engineering, vol. 51, no. 6, pp. 583–589, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. A. R. Khaloo, M. Dehestani, and P. Rahmatabadi, “Mechanical properties of concrete containing a high volume of tire-rubber particles,” Waste Management, vol. 28, no. 12, pp. 2472–2482, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. N. I. Fattuhi and L. A. Clark, “Cement-based materials containing shredded scrap truck tyre rubber,” Construction and Building Materials, vol. 10, no. 4, pp. 229–236, 1996. View at Publisher · View at Google Scholar · View at Scopus
  19. J. N. Eiras, F. Segovia, M. V. Borrachero, J. Monzó, M. Bonilla, and J. Payá, “Physical and mechanical properties of foamed Portland cement composite containing crumb rubber from worn tires,” Materials & Design, vol. 59, pp. 550–557, 2014. View at Publisher · View at Google Scholar · View at Scopus
  20. G. Martínez-Barrera and O. Gencel, “Structural modification of waste materials and its use in building materials,” in Photo Cured Materials, A. Tiwari and A. Polykarpov, Eds., pp. 347–359, Royal Society of Chemistry, Cambridge, UK, 2015. View at Google Scholar
  21. E. Cruz-Zaragoza and G. Martínez-Barrera, “Ionizing radiation effects on the matter and its applications in research and industry,” in Gamma Radiation Effects on Polymeric Materials and Its Applications, C. Barrera-Díaz and G. Martínez-Barrera, Eds., pp. 1–14, Research Signpost, Kerala, India, 2009. View at Google Scholar
  22. S. R. Scagliusi, E. L. C. Cardoso, and A. B. Lugao, “Effect of gamma radiation on chlorobutyl rubber vulcanized by three different crosslinking systems,” Radiation Physics and Chemistry, vol. 81, no. 9, pp. 1370–1373, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. H. L. Sui, X. Y. Liu, F. C. Zhong, X. Y. Li, L. Wang, and X. Ju, “Gamma radiation effects on polydimethylsiloxane rubber foams under different radiation conditions,” Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, vol. 307, pp. 570–574, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. R. L. Clough, “High-energy radiation and polymers: a review of commercial processes and emerging applications,” Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 185, no. 1–4, pp. 8–33, 2001. View at Publisher · View at Google Scholar
  25. M. Barbuta and M. Hrja, “Properties of fiber reinforced polymer concrete,” Buletinul Institutului Politehnic din Iaşi, vol. 43, pp. 13–22, 2008. View at Google Scholar
  26. Y. Le Pape, K. G. Field, and I. Remec, “Radiation effects in concrete for nuclear power plants. Part II. Perspective from micromechanical modeling,” Nuclear Engineering and Design, vol. 282, pp. 144–157, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. B. Kelly, J. Brocklehurst, D. Mottershead, and S. McNearney, “The effects of reactor radiation on concrete,” in Proceedings of the 2nd Information Meeting on Pre Stress Concrete and Reactor Pressure Vessels and their Thermal Isolation, pp. 237–265, Brussels, Belgium, 1969.
  28. C. Menchaca-Campos, C. E. Barrera-Díaz, G. Martínez-Barrera, and O. Gencel, “Influence of irradiated polymeric fibers on the mechanical properties of concretes: analysis by microscopy,” in Current Microscopy Contributions to Advances in Science and Technology, A. Méndez-Vilas, Ed., pp. 1123–1129, Formatex Research Center, Badajoz, Spain, 2012. View at Google Scholar
  29. M. H. P. Gazineu, V. A. dos Santos, C. A. Hazin, W. E. de Vasconcelos, and C. C. Dantas, “Production of polymer-plaster composite by gamma irradiation,” Progress in Nuclear Energy, vol. 53, no. 8, pp. 1140–1144, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. L. I. Avila-Córdoba, G. Martínez-Barrera, F. Ureña-Nuñez, and C. E. Barrera-Díaz, “Electron microscopy for the evaluation of concrete surfaces modified by gamma radiation,” in Current Microscopy Contributions to Advances in Science and Technology, A. Méndez-Vilas, Ed., pp. 1115–1122, Formatex Research Center, Badajoz, Spain, 2012. View at Google Scholar
  31. R. Sonnier, E. Leroy, L. Clerc, A. Bergeret, and J. M. Lopez-Cuesta, “Compatibilisation of polyethylene/ground tyre rubber blends by γ irradiation,” Polymer Degradation and Stability, vol. 91, no. 10, pp. 2375–2379, 2006. View at Publisher · View at Google Scholar · View at Scopus
  32. T. Yasin, S. Khan, M. Shafiq, and R. Gill, “Radiation crosslinking of styrene-butadiene rubber containing waste tire rubber and polyfunctional monomers,” Radiation Physics and Chemistry, vol. 106, pp. 343–347, 2015. View at Publisher · View at Google Scholar · View at Scopus
  33. American Society for Testing Materials (ASTM), “Standard specification for Portland cement,” ASTM C 150-07, 2007. View at Google Scholar
  34. American Concrete Institute, “Standard practice for selecting proportions for normal, heavyweight, and mass concrete,” ACI 211.1-91, 2002. View at Google Scholar
  35. E. S. Herrera-Sosa, G. Martínez-Barrera, C. Barrera-Díaz, and E. Cruz-Zaragoza, “Waste tire particles and gamma radiation as modifiers of the mechanical properties of concrete,” Advances in Materials Science and Engineering, vol. 2014, Article ID 327856, 7 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  36. American Society for Testing Materials (ASTM), “Standard specification for mixing rooms, moist cabinets, moist rooms, and water storage tanks used in the testing of hydraulic cements and concretes,” ASTM C511-09, American Society for Testing Materials (ASTM), Philadelphia, Pa, USA, 2009. View at Google Scholar
  37. American Society for Testing Materials (ASTM), Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM C/192/C 192M-00, American Society for Testing Materials (ASTM), West Conshohocken, Pa, USA, 2000.
  38. American Society for Testing Materials (ASTM), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM C 39/C 39M-01, American Society for Testing Materials (ASTM), West Conshohocken, Pa, USA, 2001.
  39. American Society for Testing Materials (ASTM), “Standard test method for flexural strength of concrete (using simple beam with third point loading),” ASTM C 78-00, American Society for Testing Materials (ASTM), Philadelphia, Pa, USA, 2000. View at Google Scholar
  40. American Society for Testing Materials (ASTM), Standard Test Method for Pulse Velocity Trough Concrete, ASTM C 597-09, American Society for Testing Materials (ASTM), West Conshohocken, Pa, USA, 2009.
  41. G. Skripkiunas, A. Grinys, and M. Dauksys, “Using tires rubber waste for modification of concrete properties,” in Sustainable Construction Materials and Technologies, Y.-M. Chun, P. Claisse, T. R. Naik, and E. Ganjian, Eds., pp. 85–90, Taylor & Francis Group, London, UK, 2007. View at Google Scholar