Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2015, Article ID 561012, 9 pages
http://dx.doi.org/10.1155/2015/561012
Research Article

The Mechanical Properties of a Poly(methyl methacrylate) Denture Base Material Modified with Dimethyl Itaconate and Di-n-butyl Itaconate

1Innovation Center of the Faculty of Technology and Metallurgy, University of Belgrade, 4 Karnegijeva Street, 11000 Belgrade, Serbia
2Faculty of Technology and Metallurgy, University of Belgrade, 4 Karnegijeva Street, 11000 Belgrade, Serbia
3Faculty of Dentistry, University of Belgrade, 8 Dr. Subotića Street, 11000 Belgrade, Serbia
4Institute of Chemistry, Technology and Metallurgy, University of Belgrade, 12 Njegoseva Street, 11000 Belgrade, Serbia

Received 24 February 2015; Revised 17 May 2015; Accepted 18 May 2015

Academic Editor: Huining Xiao

Copyright © 2015 Pavle Spasojevic et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Pavle Spasojevic, Milorad Zrilic, Vesna Panic, Dragoslav Stamenkovic, Sanja Seslija, and Sava Velickovic, “The Mechanical Properties of a Poly(methyl methacrylate) Denture Base Material Modified with Dimethyl Itaconate and Di-n-butyl Itaconate,” International Journal of Polymer Science, vol. 2015, Article ID 561012, 9 pages, 2015. https://doi.org/10.1155/2015/561012.