Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2015, Article ID 715753, 8 pages
http://dx.doi.org/10.1155/2015/715753
Research Article

Stress Distribution of CF/EP Laminated Composites under Supercritical Conditions

School of Mechanical & Automotive Engineering, Hefei University of Technology, Hefei 230009, China

Received 6 October 2014; Accepted 19 January 2015

Academic Editor: Jose Ramon Leiza

Copyright © 2015 Haihong Huang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Carberry, “‘Aerospace’s role in the development of the recycled carbon fibre supply chain,” in Proceedings of the Carbon Fibre Recycling and Reuse Conference, Intertechpria, Hamburg, Germany, 2009.
  2. G. Belingardi and J. Obradovic, “Recent development in car body lightweight design: a contribution toward greener envrionment,” Mobility & Vehicle Mechanics, vol. 38, no. 4, pp. 7–23, 2012. View at Google Scholar
  3. C. E. Kouparitsas, C. N. Kartalis, P. C. Varelidis, C. J. Tsenoglou, and C. D. Papaspyrides, “Recycling of the fibrous fraction of reinforced thermoset composites,” Polymer Composites, vol. 23, no. 4, pp. 682–689, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Pimenta and S. T. Pinho, “Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook,” Waste Management, vol. 31, no. 2, pp. 378–392, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. X. Yang, R. Boom, B. Irion, D.-J. van Heerden, P. Kuiper, and H. de Wit, “Recycling of composite materials,” Chemical Engineering and Processing: Process Intensification, vol. 51, pp. 53–68, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. F. Liu, W. S. Zhang, and H. C. Zhang, “Analysis of layered experiments on printed circuit board in the environment with supercritical CO2 fluid,” Chinese Journal of Environmental Engineering, vol. 7, no. 5, 2011. View at Google Scholar
  7. G. Marsh, “Carbon recycling: a soluble problem,” Reinforced Plastics, vol. 53, no. 5, pp. 22–27, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Piñero-Hernanz, J. García-Serna, C. Dodds et al., “Chemical recycling of carbon fibre composites using alcohols under subcritical and supercritical conditions,” The Journal of Supercritical Fluids, vol. 46, no. 1, pp. 83–92, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. I. Okajima, K. Yamada, T. Sugeta, and T. Sako, “Decomposition of epoxy resin and recycling of CFRP with sub- and supercritical water,” Kagaku Kogaku Ronbunshu, vol. 28, no. 5, pp. 553–558, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Y. Liu, L. H. Meng, Y. D. Huang, and J. Du, “Recycling of carbon/epoxy composites,” Journal of Applied Polymer Science, vol. 94, no. 5, pp. 1912–1916, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. C. Lu, P. Chen, and Y. Gao, “Thermal stress distribution in CF/EP composite in low earth orbit,” Journal of Composite Materials, vol. 44, no. 14, pp. 1729–1738, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Gao, X. J. Dai, S. L. Dong, C. Lu, and J. Bao, “Investigation of thermal stress in a unidirectional carbon fiber/epoxy resin composite under thermal cycling,” Polymeric Materials Science and Engineering, vol. 28, no. 9, pp. 178–181, 2012. View at Google Scholar · View at Scopus
  13. X. Y. Li, Z. F. Liu, and G. F. Liu, “Model analysis of printed circuit board's varying element in supercritical carbon dioxide,” Modern Manufacturing Engineering, vol. 8, pp. 1–5, 2007. View at Google Scholar
  14. J. K. Kim and Y. M. Mai, Engineered Interfaces in Fiber Reinforced Composites, Elsevier, Amsterdam, The Netherlands, 1998.
  15. E. R. G. Eckert and R. M. Drake, Analysis of Heat and Mass Transfer, McGraw-Hill, New York, NY, USA, 1972.
  16. P. D. Soden, M. J. Hinton, and A. S. Kaddour, “Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates,” Composites Science and Technology, vol. 58, no. 7, pp. 1011–1022, 1998. View at Publisher · View at Google Scholar · View at Scopus
  17. R. F. Landel and L. E. Nielsen, Mechanical Properties of Polymers and Composites, Marcel Dekker, New York, NY, USA, 1993.
  18. O. Sindt, J. Perez, and J. F. Gerard, “Molecular architecture-mechanical behaviour relationships in epoxy networks,” Polymer, vol. 37, no. 14, pp. 2989–2997, 1996. View at Publisher · View at Google Scholar · View at Scopus
  19. D. R. Xin, Mechanical properties and the interface failure mechanism of epoxy resin under hygrothermal condition [Ph.D. thesis], South China University of Technology, Guangdong Province, China, 2013.
  20. C. Li and A. Strachan, “Molecular dynamics predictions of thermal and mechanical properties of thermoset polymer EPON862/DETDA,” Polymer, vol. 52, no. 13, pp. 2920–2928, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. N. B. Shenogina, M. Tsige, S. S. Patnaik, and S. M. Mukhopadhyay, “Molecular modeling approach to prediction of thermo-mechanical behavior of thermoset polymer networks,” Macromolecules, vol. 45, no. 12, pp. 5307–5315, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. J. C. Moller, S. A. Barr, E. J. Schultz, T. D. Breitzman, and R. J. Berry, “Simulation of fracture nucleation in cross-linked polymer networks,” JOM, vol. 65, no. 2, pp. 147–167, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. L. Shen, L. Wang, T. Liu, and C. He, “Nanoindentation and morphological studies of epoxy nanocomposites,” Macromolecular Materials and Engineering, vol. 291, no. 11, pp. 1358–1366, 2006. View at Publisher · View at Google Scholar · View at Scopus