Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2015, Article ID 721035, 7 pages
http://dx.doi.org/10.1155/2015/721035
Research Article

Rapid Fabrication of Periodic Patterns on Poly(styrene-co-acrylonitrile) Surfaces Using Direct Laser Interference Patterning

1Department of Chemistry, National University of Río Cuarto, Route 36, km 601, 5800 Rio Cuarto, Argentina
2Faculty of Engineering, National University of Río Cuarto, Route 36, km 601, 5800 Rio Cuarto, Argentina
3Fraunhofer Institute for Material and Beam Technology, Winterbergstraße 28, 01277 Dresden, Germany
4Technische Universität Dresden, Institute of Manufacturing Technology, George-Bähr-Straße 3c, 01069 Dresden, Germany

Received 1 January 2015; Accepted 12 February 2015

Academic Editor: Angel Concheiro

Copyright © 2015 Martin F. Broglia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Martin F. Broglia, Diego F. Acevedo, Denise Langheinrich, Heidi R. Perez-Hernandez, Cesar A. Barbero, and Andrés F. Lasagni, “Rapid Fabrication of Periodic Patterns on Poly(styrene-co-acrylonitrile) Surfaces Using Direct Laser Interference Patterning,” International Journal of Polymer Science, vol. 2015, Article ID 721035, 7 pages, 2015. https://doi.org/10.1155/2015/721035.