Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2015 (2015), Article ID 729132, 8 pages
http://dx.doi.org/10.1155/2015/729132
Research Article

Properties of Polymer-Composite Used as Fills of Asian Lacquerware: Issues on Restoration Processes of Lacquered Objects from Cultural Heritage

1Centre de Recherche et de Restauration des Musées de France (C2RMF), Ministère de la Culture et de la Communication, Palais du Louvre-Porte des Lions, 14 quai François Mitterrand, 75001 Paris, France
2Laboratoire de Physicochimie des Polymères et des Interfaces (LPPI), Institut des Matériaux, Université de Cergy-Pontoise, 5 mail Gay-Lussac, Neuville-sur-Oise, 95031 Cergy-Pontoise Cedex, France
3Institut National du patrimoine (INp), Département des Restaurateurs, 150 avenue du Président Wilson, 93210 Saint Denis La Plaine, France

Received 29 January 2015; Revised 16 June 2015; Accepted 25 June 2015

Academic Editor: Michael Schilling

Copyright © 2015 Anne-Solenn Le Hô et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Kamiya, R. Lu, T. Kumamoto, T. Honda, and T. Miyakoshi, “Deterioration of surface structure of lacquer films due to ultraviolet irradiation,” Surface and Interface Analysis, vol. 38, no. 9, pp. 1311–1315, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. C. Mc Sharry, R. Faulkner, S. Rivers, M. S. P. Shaffer, and T. Welton, “The chemistry of East Asian lacquer: a review of the scientific literature,” Reviews in Conservation, vol. 8, pp. 29–40, 2007. View at Google Scholar
  3. T. Ogawa, K. Arai, and S. Osawa, “Light stability of oriental lacquer films irradiated by a fluorescent lamp,” Journal of Environmental Polymer Degradation, vol. 6, no. 1, pp. 59–65, 1998. View at Publisher · View at Google Scholar · View at Scopus
  4. A.-S. Le Hô, C. Duhamel, C. Daher et al., “Alteration of Asian lacquer: in-depth insight using a physico-chemical multiscale approach,” Analyst, vol. 138, no. 19, pp. 5685–5696, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Yamashita, “The plan for the conservation of the Mazarin chest,” in Proceedings of the International Course on Conservation of Japanese Lacquer in the Role of Urushi in International Exchange: 27th International Symposium on the Conservation and Restoration of Cultural Property, pp. 159–170, Tokyo National Research Institute for Cultural Property, Tokyo National Museum, Tokyo, Japan, December 2003.
  6. M. Webb, “Methods and materials for filling losses on lacquer objects,” Journal of the American Institute for Conservation, vol. 37, no. 1, pp. 117–133, 1998. View at Publisher · View at Google Scholar
  7. M. S. Podmaniczky, “Structural fills for large wood objects: contrasting and complementary approaches,” Journal of the American Institute for Conservation, vol. 37, no. 1, pp. 111–116, 1998. View at Publisher · View at Google Scholar
  8. J. Thornton, “A brief history and review of the early practice and materials of gap-filling in the west,” Journal of the American Institute for Conservation, vol. 37, no. 1, pp. 3–22, 1998. View at Publisher · View at Google Scholar
  9. S. Lambooy, “Lacquer on Japanese porcelain: a case study of two Imari vases with urushi lacquer decoration from the collection of the Rijksmuseum Amsterdam,” in Proceedings of the 14th Triennal Meeting, International Council of Museums Conservation Committee, Ed., vol. 2, pp. 1075–1082, The Hague, The Netherlands, September 2005.
  10. M. H. Carr, “Lacquer loss compensation revisited: more big holes in the top,” in Postprints of the Wooden Artifacts Group, 31st Annual Meeting of the American Institute for Conservation, June 2003, pp. 59–65, AIC, Arlington, Tex, USA, 2003. View at Google Scholar
  11. S. Fukuda, “Japanese lacquered albums, an appraisal of their development, construction and repair,” Bookbinder, no. 23, pp. 35–45, 2009. View at Google Scholar
  12. V. Horie, “Acrylic polymers,” in Materials for Conservation, p. 159, Elsevier, Oxford, UK, 2nd edition, 2010. View at Google Scholar
  13. R. L. Feller, “Standards in the evaluation of thermoplastic resins,” in 5th Triennal Meeting: Zagreb, 1-8 October 1978: Preprints, vol. 3, pp. 78/16/4/1–78/16/4/11, International Council of Museums Conservation Committee, Zagreb, Croatia, 1978. View at Google Scholar
  14. J. H. Hofenk de Graaff, “Hydroxy propyl cellulose, a multi-purpose conservation material,” in Proceedings of the 6th Triennal Meeting, International Council of Museums Conservation Committee, Ed., vol. 3, pp. 81/14/9-1–81/14/9-7, Ottawa, Canada, September 1981.
  15. K. St. John, “Survey of current methods and materials used for the conservation of leather bookbindings,” AIC Book and Paper Group Annual 19, 2000. View at Google Scholar
  16. J. Brandrup, E. H. Immergut, E. A. Grulke, A. Abe, and D. R. Bloch, Polymer Handbook, John Wiley & Sons, New York, NY, USA, 2005.
  17. P. Sakellariou, R. C. Rowe, and E. F. T. White, “The thermomechanical properties and glass transition temperatures of some cellulose derivatives used in film coating,” International Journal of Pharmaceutics, vol. 27, no. 2-3, pp. 267–277, 1985. View at Publisher · View at Google Scholar · View at Scopus
  18. R. F. Landel and L. E. Nielsen, Mechanical Properties of Polymers and Composites, CRC Press, Marcel Dekker, New York, NY, USA, 1994.
  19. Klucel hydroxypropylcellulose in hot-melt extrusion applications, Aqualon, Ashland, http://www.ile.com.cn/UpLoad/file/201372315511314020130723035113140.pdf.
  20. K.-J. Kim, S.-B. Lee, and N.-W. Han, “Effects of the degree of crosslinking on properties of poly(vinyl alcohol) membranes,” Polymer Journal, vol. 25, no. 12, pp. 1295–1302, 1993. View at Publisher · View at Google Scholar · View at Scopus
  21. O. Gordobil, I. Egüés, I. Urruzola, and J. Labidi, “Xylan-cellulose films: improvement of hydrophobicity, thermal and mechanical properties,” Carbohydrate Polymers, vol. 112, pp. 56–62, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. P. Pareo, G. L. De Gregorio, M. Manca et al., “Ultra lightweight PMMA-based composite plates with robust super-hydrophobic surfaces,” Journal of Colloid and Interface Science, vol. 363, no. 2, pp. 668–675, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. E. Chibowski, L. Hołysz, K. Terpilowski, and M. Jurak, “Investigation of super-hydrophobic effect of PMMA layers with different fillers deposited on glass support,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 291, no. 1–3, pp. 181–190, 2006. View at Publisher · View at Google Scholar · View at Scopus