Effect of Die Head Temperature at Compounding Stage on the Degradation of Linear Low Density Polyethylene/Plastic Film Waste Blends after Accelerated Weathering

<div>Young’s modulus of the formulated samples with respect to accelerated weathering duration (hours). Samples processed with a Die Head Temperature (DHT) = 175, 185, and 195°C are shown in (a), (b), and (c), respectively.</div>

International Journal of Polymer Science

fig4

Figure 4

Figure 4: Effect of Die Head Temperature at Compounding Stage on the Degradation of Linear Low Density Polyethylene/Plastic Film Waste Blends after Accelerated Weathering 

Figure 4 | Effect of Die Head Temperature at Compounding Stage on the Degradation of Linear Low Density Polyethylene/Plastic Film Waste Blends after Accelerated Weathering 