Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2016, Article ID 7828451, 11 pages
http://dx.doi.org/10.1155/2016/7828451
Research Article

Influence of Fiber Content on Mechanical and Morphological Properties of Woven Kenaf Reinforced PVB Film Produced Using a Hot Press Technique

1Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
2Materials Engineering Department, Faculty of Engineering, Al-Mustansiriya University, Baghdad, Iraq
3Aerospace Manufacturing Research Centre (AMRC), Level 7, Tower Block, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
4Laboratory of Bio-Composites Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia

Received 3 December 2015; Accepted 27 January 2016

Academic Editor: Heitor L. Ornaghi

Copyright © 2016 Suhad D. Salman et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Suhad D. Salman, Z. Leman, M. T. H. Sultan, M. R. Ishak, and F. Cardona, “Influence of Fiber Content on Mechanical and Morphological Properties of Woven Kenaf Reinforced PVB Film Produced Using a Hot Press Technique,” International Journal of Polymer Science, vol. 2016, Article ID 7828451, 11 pages, 2016. https://doi.org/10.1155/2016/7828451.