Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2016, Article ID 9838067, 10 pages
http://dx.doi.org/10.1155/2016/9838067
Research Article

[MG49-LiClO4]:[TiO2-SiO2] Polymer Electrolytes: In Situ Preparation and Characterization

1Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
2Sustainable Energy Technologies (SET) Center, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia

Received 18 March 2016; Revised 8 May 2016; Accepted 23 May 2016

Academic Editor: Subramaniam Ramesh

Copyright © 2016 Oon Lee Kang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. J. Leo, G. V. Subba Rao, and B. V. R. Chowdari, “Studies on plasticized PEO-lithium triflate-ceramic filler composite electrolyte system,” Solid State Ionics, vol. 148, no. 1-2, pp. 159–171, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. G. Mao, M.-L. Saboungi, D. L. Price, Y. S. Badyal, and H. E. Fischer, “Lithium environment in PEO-LiClO4 polymer electrolyte,” Europhysics Letters, vol. 54, no. 3, pp. 347–353, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. D. Saikia and A. Kumar, “Ionic transport in P(VDF-HFP)-PMMA-LiCF3SO3-(PC + DEC)-SiO2 composite gel polymer electrolyte,” European Polymer Journal, vol. 41, no. 3, pp. 563–568, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Yang and J. Hou, “Membranes in lithium ion batterie,” Membranes, vol. 2, no. 3, pp. 367–383, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Croce, L. Persi, F. Ronci, and B. Scrosati, “Nanocomposite polymer electrolytes and their impact on the lithium battery technology,” Solid State Ionics, vol. 135, no. 1–4, pp. 47–52, 2000. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Z. S. Fadli and A. L. Famiza, “SIO2 filler as interface modifier in PMMA/ENR 50 electrolytes,” Advanced Materials Research, vol. 812, pp. 120–124, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. M. H. Khanmirzaei and S. Ramesh, “Nanocomposite polymer electrolyte based on rice starch/ionic liquid/TiO2 nanoparticles for solar cell application,” Measurement, vol. 58, pp. 68–72, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. H.-W. Chen, C.-Y. Chiu, H.-D. Wu, I.-W. Shen, and F.-C. Chang, “Solid-state electrolyte nanocomposites based on poly(ethylene oxide), poly(oxypropylene) diamine, mineral clay and lithium perchlorate,” Polymer, vol. 43, no. 18, pp. 5011–5016, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Zhang, H. Han, S. Wu et al., “Conductive carbon nanoparticles hybrid PEO/P(VDF-HFP)/SiO2 nanocomposite polymer electrolyte type dye sensitized solar cells,” Solid State Ionics, vol. 178, no. 29-30, pp. 1595–1601, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. H. H. Sumathipala, J. Hassoun, S. Panero, and B. Scrosati, “High performance PEO-based polymer electrolytes and their application in rechargeable lithium polymer batteries,” Ionics, vol. 13, no. 5, pp. 281–286, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. A. S. Kamisan, T. I. T. Kudin, A. M. M. Ali, and M. Z. A. Yahya, “Polymer gel electrolytes based on 49% methyl-grafted natural rubber,” Sains Malaysiana, vol. 40, no. 1, pp. 49–54, 2011. View at Google Scholar · View at Scopus
  12. G. C. Psarras, G. A. Sofos, A. Vradis et al., “HNBR and its MWCNT reinforced nanocomposites: crystalline morphology and electrical response,” European Polymer Journal, vol. 54, no. 1, pp. 190–199, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. S. H. Kim, M. J. Misner, L. Yang, O. Gang, B. M. Ocko, and T. P. Russell, “Salt complexation in block copolymer thin films,” Macromolecules, vol. 39, no. 24, pp. 8473–8479, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Rajendran and T. Uma, “Conductivity studies on PVC/PMMA polymer blend electrolyte,” Materials Letters, vol. 44, no. 3, pp. 242–247, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. S. K. Deraman, N. S. Mohamed, and R. H. Y. Subban, “Ionic liquid incorporated pvc based polymer electrolytes: electrical and dielectric properties,” Sains Malaysiana, vol. 43, no. 6, pp. 877–883, 2014. View at Google Scholar · View at Scopus
  16. B. Chatterjee, N. Kulshrestha, and P. Gupta, “Nano composite solid polymer electrolytes based on biodegradable polymers starch and poly vinyl alcohol,” Measurement, vol. 82, pp. 490–499, 2016. View at Publisher · View at Google Scholar
  17. K. Rokesh, S. Anandan, and K. Jothivenkatachalam, “Polymer electrolytes in dye sensitized solar cells,” Materials Focus, vol. 4, no. 4, pp. 262–271, 2015. View at Publisher · View at Google Scholar
  18. S. Rajendran, T. Mahalingam, and R. Kannan, “Experimental investigations on PAN-PEO hybrid polymer electrolytes,” Solid State Ionics, vol. 130, no. 1, pp. 143–148, 2000. View at Publisher · View at Google Scholar · View at Scopus
  19. W. Dieterich, O. Dürr, P. Pendzig, A. Bunde, and A. Nitzan, “Percolation concepts in solid state ionics,” Physica A: Statistical Mechanics and Its Applications, vol. 266, no. 1–4, pp. 229–237, 1999. View at Publisher · View at Google Scholar
  20. K.-S. Kim, S.-Y. Park, S.-H. Yeon, and H. Lee, “N-Butyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide-PVdF(HFP) gel electrolytes,” Electrochimica Acta, vol. 50, no. 28, pp. 5673–5678, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Kalfus, N. Singh, and A. J. Lesser, “Reinforcement in nano-filled PAA hydrogels,” Polymer, vol. 53, no. 13, pp. 2544–2547, 2012. View at Publisher · View at Google Scholar · View at Scopus