Research Article
In Situ Wire Drawing of Phosphate Glass in Polymer Matrices for Material Extrusion 3D Printing
Table 5
Mechanical testing results for PLA loaded with P-glass at various weight percentages.
| Material | UTS (MPa) | St. Dev | % EL | St. Dev | Sample size () |
| PLA/P-glass 2.5% | 57.7 | 1.7 | 6.0 | 2.2 | 5 | PLA/P-glass 5% | 57.7 | 1.5 | 4.6 | 0.9 | 5 | PLA/P-glass 10% | 48.4 | 2.8 | 4.4 | 0.9 | 5 | PLA/P-glass 15% | 42.2 | 2.1 | 5.2 | 1.5 | 6 | PLA, baseline | 55.1 | 2.6 | 3.3 | 1.6 | 4 |
|
|