Research Article

In Situ Wire Drawing of Phosphate Glass in Polymer Matrices for Material Extrusion 3D Printing

Table 8

Melt flow rate values for the materials tested in this study.

MaterialMelt flow rate (g/10 min)Test load (kg)Temperature °C

ABS SEBS-g-MA33.723.8230
P-glass 5%, ABS SEBS-g-MA32.383.8230
P-glass 10%, ABS SEBS-g-MA30.413.8230
P-glass 20%, ABS SEBS-g-MA29.483.8230
PLA16.982.16210
PLA/P-glass 2.5%34.362.16210
PLA/P-glass 5%74.82.16210
PLA/P-glass 10%85.562.16210
PLA/P-glass 15%60.522.16210