Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2017, Article ID 2693526, 10 pages
https://doi.org/10.1155/2017/2693526
Research Article

Proposal of a PCM Underfloor Heating System Using a Web Construction Method

School of Architecture and Building Science, Chung-Ang University, 221 Heuksuk 1-Dong, Dongjak-Ku, Seoul 156-756, Republic of Korea

Correspondence should be addressed to Jin Chul Park; rk.ca.uac@krapcniJ

Received 6 January 2017; Accepted 12 February 2017; Published 27 February 2017

Academic Editor: Geun Y. Yun

Copyright © 2017 Sanghoon Baek and Jin Chul Park. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K.-N. Rhee and K. W. Kim, “A 50 year review of basic and applied research in radiant heating and cooling systems for the built environment,” Building and Environment, vol. 91, pp. 166–190, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. D. Wang, C. Wu, Y. Liu, P. Chen, and J. Liu, “Experimental study on the thermal performance of an enhanced-convection overhead radiant floor heating system,” Energy and Buildings, vol. 135, pp. 233–243, 2017. View at Publisher · View at Google Scholar
  3. M. S. Shin, K. N. Rhee, S. R. Ryu, M. S. Yeo, and K. W. Kim, “Design of radiant floor heating panel in view of floor surface temperatures,” Building and Environment, vol. 92, pp. 559–577, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Rhee, B. W. Olesen, and K. W. Kim, “Ten questions about radiant heating and cooling systems,” Building and Environment, vol. 112, pp. 367–381, 2017. View at Publisher · View at Google Scholar
  5. S. M. Kim and H.-J. Kim, “Thermal stability and viscoelastic properties of MF/PVAc hybrid resins on the adhesion for engineered flooring in under heating system; ONDOL,” Thermochimica Acta, vol. 444, no. 2, pp. 134–140, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. G.-S. Song, “Buttock responses to contact with finishing materials over the ONDOL floor heating system in Korea,” Energy and Buildings, vol. 37, no. 1, pp. 65–75, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. J.-W. Choi, “Bed climate of Korean using ondol heating system,” Journal of Thermal Biology, vol. 18, no. 5-6, pp. 399–403, 1993. View at Publisher · View at Google Scholar · View at Scopus
  8. S. K. Jeong and Y. U. Ban, “The spatial configurations in South Korean apartments built between 1972 and 2000,” Habitat International, vol. 42, pp. 90–102, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Seo, J. Sung, S.-D. Oh, H.-S. Oh, and H.-Y. Kwak, “Economic optimization of a cogeneration system for apartment houses in Korea,” Energy and Buildings, vol. 40, no. 6, pp. 961–967, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. S.-S. Kim, D.-H. Kang, D.-H. Choi, M.-S. Yeo, and K.-W. Kim, “Comparison of strategies to improve indoor air quality at the pre-occupancy stage in new apartment buildings,” Building and Environment, vol. 43, no. 3, pp. 320–328, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. Ministry of Land, Infrastructure and Transport Korea, Standard of Impact Sound Insulation Structure for Preventing Noise between Floors, 2015, http://www.lawnb.com/data/Focuslawdata/lawnbfocusB00039224457.pdf.
  12. J. Kim, J. Jeong, E. Hwang, and S. Shin, “Properties of foamed concrete according to types and concentrations of foam agent,” Journal of the Korea Concrete Institute, vol. 24, no. 1, pp. 61–70, 2012. View at Publisher · View at Google Scholar
  13. J. H. Choi, S. C. Shin, J. Y. Jeong, E. H. Hwang, and J. M. Kim, “Insulation properties of foamed concrete according to type and concentration of foaming agent,” Korea Concrete Institute, vol. 5, pp. 189–190, 2012. View at Google Scholar
  14. T. B. Min and H. S. Lee, “A study on the properties of structure lightweight foamed concrete using the general aggregate and foaming agent,” Architectural Institute of Korea, vol. 30, no. 1, pp. 225–226, 2010. View at Google Scholar
  15. I. Yang, K. Kim, and Y. Choi, “Effect of cementitious composite on the thermal and mechanical properties of fiber-reinforced mortars for thermal energy storage,” Journal of the Korea Concrete Institute, vol. 28, no. 4, pp. 395–405, 2016. View at Publisher · View at Google Scholar
  16. D. C. Park, H. Song, and J. J. Kim, “An experimental study on the thermal conductivity of PCM,” Journal of the Architectural Institute of Korea, vol. 23, no. 10, pp. 107–114, 2007. View at Google Scholar
  17. K. S. Park, G. H. Cho, and D. C. Park, “A thermal characteristics study on the application method of activated carbon for a cement mortar finishing materials,” The Korea Institute of Building Construction, vol. 11, no. 1, pp. 115–116, 2011. View at Google Scholar
  18. D. Bai, J. Kim, and H. Kim, “Experimental study on consumption of energy and heating efficiency in floor water heating system on using ondol panel of double metal rendering,” Journal of the Korea Academia-Industrial cooperation Society, vol. 13, no. 12, pp. 6167–6175, 2012. View at Publisher · View at Google Scholar
  19. C. H. Jeong, G. D. Lee, M. S. Yeo, and K. W. Kim, “Analysis and improvement strategy of the surface temperature distribution in a prefabricated floor heating panel through mock-up test,” Journal of The Korean Society of Living Environmental System, vol. 20, no. 4, pp. 490–505, 2013. View at Google Scholar
  20. C. I. Jang, J. M. Kim, H. B. Kang, Y. N. Yoon, W. Y. Kim, and J. P. Won, “Evaluation of thermal effect for pp fiber reinforced lightweight aggregate polymer mortar,” Proceedings of Korea Concrete Institute, pp. 215–216, 2009. View at Google Scholar
  21. S. A. Mohameda, F. A. Al-Sulaimana, N. I. Ibrahima et al., “A review on current status and challenges of inorganic phase change materials for thermal energy storage systems,” Renewable and Sustainable Energy Reviews, vol. 70, pp. 1072–1089, 2017. View at Publisher · View at Google Scholar
  22. H. Johra and P. Heiselberg, “Influence of internal thermal mass on the indoor thermal dynamics and integration of phase change materials in furniture for building energy storage: a review,” Renewable and Sustainable Energy Reviews, vol. 69, pp. 19–32, 2017. View at Publisher · View at Google Scholar
  23. S. Chandel and T. Agarwal, “Review of current state of research on energy storage, toxicity, health hazards and commercialization of phase changing materials,” Renewable and Sustainable Energy Reviews, vol. 67, pp. 581–596, 2017. View at Publisher · View at Google Scholar
  24. P. Lv, C. Liu, and Z. Rao, “Review on clay mineral-based form-stable phase change materials: preparation, characterization and applications,” Renewable and Sustainable Energy Reviews, vol. 68, pp. 707–726, 2017. View at Publisher · View at Google Scholar
  25. K. Lin, Y. Zhang, X. Xu, H. Di, R. Yang, and P. Qin, “Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates,” Building and Environment, vol. 39, no. 12, pp. 1427–1434, 2004. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Lin, Y. Zhang, X. Xu, H. Di, R. Yang, and P. Qin, “Experimental study of under-floor electric heating system with shape-stabilized PCM plates,” Energy and Buildings, vol. 37, no. 3, pp. 215–220, 2005. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Zhang, J. Ding, X. Wang, R. Yang, and K. Lin, “Influence of additives on thermal conductivity of shape-stabilized phase change material,” Solar Energy Materials and Solar Cells, vol. 90, no. 11, pp. 1692–1702, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. P. Zhang, K. P. Lin, R. Yang, H. F. Di, and Y. Jiang, “Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings,” Energy and Buildings, vol. 38, no. 10, pp. 1262–1269, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. G. Zhou, Y. Zhang, X. Wang, K. Lin, and W. Xiao, “An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating,” Solar Energy, vol. 81, no. 11, pp. 1351–1360, 2007. View at Publisher · View at Google Scholar · View at Scopus
  30. K. Lin, Y. Zhang, H. Di, and R. Yang, “Study of an electrical heating system with ductless air supply and shape-stabilized PCM for thermal storage,” Energy Conversion and Management, vol. 48, no. 7, pp. 2016–2024, 2007. View at Publisher · View at Google Scholar · View at Scopus
  31. G. Zhou, Y. Zhang, K. Lin, and W. Xiao, “Thermal analysis of a direct-gain room with shape-stabilized PCM plates,” Renewable Energy, vol. 33, no. 6, pp. 1228–1236, 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. W. Cheng, B. Xie, R. Zhang, Z. Xu, and Y. Xia, “Effect of thermal conductivities of shape stabilized PCM on under-floor heating system,” Applied Energy, vol. 144, pp. 10–18, 2015. View at Publisher · View at Google Scholar · View at Scopus
  33. K. Huang, G. Feng, and J. Zhang, “Experimental and numerical study on phase change material floor in solar water heating system with a new design,” Solar Energy, vol. 105, pp. 126–138, 2014. View at Publisher · View at Google Scholar · View at Scopus
  34. Y. Xia and X.-S. Zhang, “Experimental research on a double-layer radiant floor system with phase change material under heating mode,” Applied Thermal Engineering, vol. 96, pp. 600–606, 2016. View at Publisher · View at Google Scholar · View at Scopus
  35. G. Zhou and J. He, “Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes,” Applied Energy, vol. 138, pp. 648–660, 2015. View at Publisher · View at Google Scholar · View at Scopus
  36. Y. Zhang, C. Chen, H. Jiao et al., “Thermal performance of new hybrid solar energy-phase change storage-floor radiant heating system,” Procedia Engineering, vol. 146, pp. 89–99, 2016. View at Google Scholar
  37. P. Llorach-Massana, J. Peña, J. Rieradevall, and J. I. Montero, “Analysis of the technical, environmental and economic potential of phase change materials (PCM) for root zone heating in Mediterranean greenhouses,” Renewable Energy, vol. 103, pp. 570–581, 2017. View at Publisher · View at Google Scholar
  38. I. Medved', A. Trník, and L. Vozár, “Modeling of heat capacity peaks and enthalpy jumps of phase-change materials used for thermal energy storage,” International Journal of Heat and Mass Transfer, vol. 107, pp. 123–132, 2017. View at Publisher · View at Google Scholar
  39. H. Ye, Z. Wang, and L. Wang, “Effects of PCM on power consumption and temperature control performance of a thermal control system subject to periodic ambient conditions,” Applied Energy, vol. 190, pp. 213–221, 2017. View at Publisher · View at Google Scholar
  40. S. J. Chang, Y. Kang, S. Wi, S. Jeong, and S. Kim, “Hygrothermal performance improvement of the Korean wood frame walls using macro-packed phase change materials (MPPCM),” Applied Thermal Engineering, vol. 114, pp. 457–465, 2017. View at Publisher · View at Google Scholar
  41. N. P. Sharifi, A. A. Shaikh, and A. R. Sakulich, “Application of phase change materials in gypsum boards to meet building energy conservation goals,” Energy and Buildings, vol. 138, pp. 455–467, 2017. View at Publisher · View at Google Scholar
  42. Rubitherm, “Products page,” 2016 http://www.rubitherm.eu/en/productCategories.html.
  43. Mitsubishi, Floor heating system, 2016, http://www.mitsubishi-cable.co.jp/reinetsu/home/attakai/system/tikunetsu/index.html.
  44. PCM Thermal Solutions, Underfloor heating and residential/commercial heating uses of PCMs, 2016, http://www.pcm-solutions.com/underfloorheating.html.
  45. PCM product Ltd, “Environmental control applications,” 2016 http://www.pcmproducts.net/Building_Temperature_Control.htm.
  46. S. G. Cha, “The management system and effect of floor noise at apartment houses,” Korean Society for Noise and Vibration Engineering, vol. 10, pp. 693–697, 2014. View at Google Scholar
  47. S. G. Cha and H. J. Kim, “Effect of the trend of civil complaint and apartment price at management system of floor noise at houses,” Korean Society for Noise and Vibration Engineering, vol. 2014, no. 10, pp. 704–709, 2014. View at Google Scholar
  48. Celsius Korea, Parafol Catalog, 2016, http://www.celsius.co.kr/phase_change_materials/download/data_sheet/Catalogue_PARAFOL.pdf.
  49. D. H. Woon and H. G. Kim, “The economics value of residential heating systems in house price,” Korean Energy Economic Review, vol. 7, no. 2, pp. 75–101, 2008. View at Google Scholar
  50. Y. A. Cengel, “Natural convection,” in Introduction to Thermodynamics & Heat Transfer, O. B. Kwon, E. P. Kim, T. G. Kim et al., Eds., pp. 217–260, Inter Vision Publishing Inc, Seoul, Republic of Korea, 2006. View at Google Scholar
  51. B. Y. Park, “A study on the thermal comfort zone in apartment house,” Architectural Institute of Korea, vol. 5, no. 6, pp. 257–263, 1989. View at Google Scholar
  52. A. Tamura, C. S. Yoon, K. Fukai, and Y. S. Chung, “A comparative study on thermal responses of male and female in thermal environmental conditions in floor heating system,” Architectural Institute of Korea, vol. 15, no. 5, pp. 127–134, 1999. View at Google Scholar
  53. Airzero Ltd, “Nozzle type vacuum sealer,” 2016 http://www.airzero.co.kr/php/board.php?board=HtmlEN&config=2&category=2&indexorder=2&command=body&no=39.
  54. Jeio Tech, Heating and Cooling Chamber Catalog, 2016, http://www.jeiotech.com/item.php?it_id=1361326243.
  55. Keysight Technologies, 34970A Data Acquisition/Data Logger Switch Unit, 2016, http://www.keysight.com/en/pd-1000001313%3Aepsg%3Apro-pn-34970A/data-acquisition-data-logger-switch-unit?nid=-33261.536881544&cc=US&lc=eng.