Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2017 (2017), Article ID 2781425, 10 pages
https://doi.org/10.1155/2017/2781425
Research Article

Preparation of High Modulus Poly(Ethylene Terephthalate): Influence of Molecular Weight, Extrusion, and Drawing Parameters

1School of Mechanical and Electrical Engineering, Qingdao University and Power & Energy Storage System Research Center, No. 308 Ningxia Road, Qingdao 266071, China
2School of Engineering and Materials Science and Materials Research Institute, Queen Mary University of London, Mile End Road, London E1 4NS, UK

Correspondence should be addressed to Jie Tang and Ton Peijs

Received 29 October 2016; Revised 12 December 2016; Accepted 28 December 2016; Published 26 January 2017

Academic Editor: Alessandro Pegoretti

Copyright © 2017 Jian Min Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Jian Min Zhang, Qingsong Hua, Christopher T. Reynolds, et al., “Preparation of High Modulus Poly(Ethylene Terephthalate): Influence of Molecular Weight, Extrusion, and Drawing Parameters,” International Journal of Polymer Science, vol. 2017, Article ID 2781425, 10 pages, 2017. doi:10.1155/2017/2781425