Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2017 (2017), Article ID 2790198, 11 pages
https://doi.org/10.1155/2017/2790198
Research Article

Effects of Hole Perpendicularity Error on Mechanical Performance of Single-Lap Double-Bolt Composite Joints

1School of Automotive Engineering, Dalian University of Technology, Dalian 116024, China
2School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China

Correspondence should be addressed to Xueshu Liu

Received 9 August 2017; Revised 10 October 2017; Accepted 7 November 2017; Published 27 November 2017

Academic Editor: Peng He

Copyright © 2017 Xueshu Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Hazimeh, R. Othman, K. Khalil, and G. Challita, “Influence of plies' orientations on the stress distribution in adhesively bonded laminate composite joints subjected to impact loadings,” Composite Structures, vol. 152, pp. 654–664, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. T. E. A. Ribeiro, R. D. S. G. Campilho, L. F. M. da Silva, and L. Goglio, “Damage analysis of composite-aluminium adhesively-bonded single-lap joints,” Composite Structures, vol. 136, pp. 25–33, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Budhe, M. D. Banea, S. de Barros, and L. F. M. da Silva, “An updated review of adhesively bonded joints in composite materials,” International Journal of Adhesion and Adhesives, vol. 72, pp. 30–42, 2017. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Valenza, V. Fiore, C. Borsellino, L. Calabrese, and G. Di Bella, “Failure map of composite laminate mechanical joint,” Journal of Composite Materials, vol. 41, no. 8, pp. 951–964, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. C. Cooper and G. J. Turvey, “Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material,” Composite Structures, vol. 32, no. 1-4, pp. 217–226, 1995. View at Publisher · View at Google Scholar · View at Scopus
  6. P. J. Gray, R. M. O'Higgins, and C. T. McCarthy, “Effect of thickness and laminate taper on the stiffness, strength and secondary bending of single-lap, single-bolt countersunk composite joints,” Composite Structures, vol. 107, no. 1, pp. 315–324, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Riccio and L. Marciano, “Effects of geometrical and material features on damage onset and propagation in single-lap bolted composite joints under tensile load: Part I - Experimental studies,” Journal of Composite Materials, vol. 39, no. 23, p. 2071, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Kolks and K. I. Tserpes, “Efficient progressive damage modeling of hybrid composite/titanium bolted joints,” Composites Part A: Applied Science and Manufacturing, vol. 56, pp. 51–63, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Heimbs, S. Schmeer, J. Blaurock, and S. Steeger, “Static and dynamic failure behaviour of bolted joints in carbon fibre composites,” Composites Part A: Applied Science and Manufacturing, vol. 47, no. 1, pp. 91–101, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. C. T. McCarthy, M. A. McCarthy, and V. P. Lawlor, “Progressive damage analysis of multi-bolt composite joints with variable bolt-hole clearances,” Composites Part B: Engineering, vol. 36, no. 4, pp. 290–305, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. C. T. McCarthy and M. A. McCarthy, “Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints. Part II. Effects of bolt-hole clearance,” Composite Structures, vol. 71, no. 2, pp. 159–175, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Gao, J. Wang, Y. Yang et al., “Effect of hole perpendicularity error on mechanical behavior of single-lap composite joints,” Astronautica Sinica, vol. 02, pp. 285–293, 2017. View at Google Scholar
  13. ASTM standard D 5961/D 5961M–96, Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates, 1996.
  14. Abaqus-Inc., Abaqus analysis user’s guide, Version 6.14, 2014, http://50.16.225.63/v6.14/books/usb/default.htm?startat=pt06ch28.html.
  15. F.-K. Chang and K.-Y. Chang, “A Progressive Damage Model for Laminated Composites Containing Stress Concentrations,” Journal of Composite Materials, vol. 21, no. 9, pp. 834–855, 1987. View at Publisher · View at Google Scholar · View at Scopus
  16. S. W. Tsai and E. M. Wu, “A general theory of strength for anisotropic materials,” Journal of Composite Materials, vol. 5, pp. 58–80, 1971. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Hashin, “Failure criteria for unidirectional fiber composites,” Journal of Applied Mechanics, vol. 47, no. 2, pp. 329–334, 1980. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Puck and H. Schürmann, “Failure analysis of FRP laminates by means of physically based phenomenological models,” Composites Science and Technology, vol. 58, no. 7, pp. 1045–1067, 1998. View at Publisher · View at Google Scholar · View at Scopus
  19. F.-K. Chang and L. B. Lessard, “Damage tolerance of laminated composites containing an open hole and subjected to compressive loadings. Part I. Analysis,” Journal of Composite Materials, vol. 25, no. 1, pp. 2–43, 1991. View at Publisher · View at Google Scholar · View at Scopus
  20. Á. Olmedo and C. Santiuste, “On the prediction of bolted single-lap composite joints,” Composite Structures, vol. 94, no. 6, pp. 2110–2117, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. S. C. Tan, “Progressive failure model for composite laminates containing openings,” Journal of Composite Materials, vol. 25, no. 5, pp. 556–577, 1991. View at Publisher · View at Google Scholar · View at Scopus
  22. F.-K. Chang and K.-Y. Chang, “Post-Failure Analysis of Bolted Composite Joints in Tension or Shear-Out Mode Failure,” Journal of Composite Materials, vol. 21, no. 9, pp. 809–833, 1987. View at Publisher · View at Google Scholar · View at Scopus
  23. P. P. Camanho and F. L. Matthews, “A progressive damage model for mechanically fastened joints in composite laminates,” Journal of Composite Materials, vol. 33, no. 24, pp. 2248–2280, 1999. View at Publisher · View at Google Scholar · View at Scopus
  24. C. T. McCarthy, R. M. O'Higgins, and R. M. Frizzell, “A cubic spline implementation of non-linear shear behaviour in three-dimensional progressive damage models for composite laminates,” Composite Structures, vol. 92, no. 1, pp. 173–181, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. K. I. Tserpes, G. Labeas, P. Papanikos, and T. Kermanidis, “Strength prediction of bolted joints in graphite/epoxy composite laminates,” Composites Part B: Engineering, vol. 33, no. 7, pp. 521–529, 2002. View at Publisher · View at Google Scholar · View at Scopus