International Journal of Polymer Science
Volume 2017 (2017), Article ID 3257043, 14 pages
https://doi.org/10.1155/2017/3257043
Research Article
Preparation and Properties of Composite PAN/PANI Membranes
Institute of Textile Engineering and Polymer Materials, University of Bielsko-Biala, Willowa 2, 43-309 Bielsko-Biala, Poland
Correspondence should be addressed to Beata Fryczkowska; lp.oksleib.hta@akswokzcyrfb
Received 9 October 2016; Revised 27 November 2016; Accepted 14 December 2016; Published 8 February 2017
Academic Editor: Bernabé L. Rivas
Copyright © 2017 Beata Fryczkowska et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Linked References
- G. Wypych, Handbook of Polymers, ChemTec, Ontario, Canada, 2nd edition, 2016.
- V. A. Bhanu, P. Rangarajan, K. Wiles et al., “Synthesis and characterization of acrylonitrile methyl acrylate statistical copolymers as melt processable carbon fiber precursors,” Polymer, vol. 43, no. 18, pp. 4841–4850, 2002. View at Publisher · View at Google Scholar · View at Scopus
- P. Gibson, H. Schreuder-Gibson, and D. Rivin, “Transport properties of porous membranes based on electrospun nanofibers,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 187-188, pp. 469–481, 2001. View at Publisher · View at Google Scholar · View at Scopus
- N. L. Lala, R. Ramaseshan, L. Bojun et al., “Fabrication of nanofibers with antimicrobial functionality used as filters: protection against bacterial contaminants,” Biotechnology and Bioengineering, vol. 97, no. 6, pp. 1357–1365, 2007. View at Publisher · View at Google Scholar · View at Scopus
- L. Feng, S. Li, H. Li et al., “Super-hydrophobic surface of aligned polyacrylonitrile nanofibers,” Angewandte Chemie—International Edition, vol. 41, no. 7, pp. 1221–1223, 2002. View at Publisher · View at Google Scholar · View at Scopus
- C. Kim, Y. I. Jeong, B. T. N. Ngoc et al., “Synthesis and characterization of porous carbon nanofibers with hollow cores through the thermal treatment of electrospun copolymeric nanofiber webs,” Small, vol. 3, no. 1, pp. 91–95, 2007. View at Publisher · View at Google Scholar · View at Scopus
- M. Peng, D. Li, L. Shen, Y. Chen, Q. Zheng, and H. Wang, “Nanoporous structured submicrometer carbon fibers prepared via solution electrospinning of polymer blends,” Langmuir, vol. 22, no. 22, pp. 9368–9374, 2006. View at Publisher · View at Google Scholar · View at Scopus
- Y. Yang, H. Wang, X. Lu, Y. Zhao, X. Li, and C. Wang, “Electrospinning of carbon/CdS coaxial nanofibers with photoluminescence and conductive properties,” Materials Science and Engineering B, vol. 140, no. 1-2, pp. 48–52, 2007. View at Publisher · View at Google Scholar · View at Scopus
- J. S. Im, S.-J. Park, T. J. Kim, Y. H. Kim, and Y.-S. Lee, “The study of controlling pore size on electrospun carbon nanofibers for hydrogen adsorption,” Journal of Colloid and Interface Science, vol. 318, no. 1, pp. 42–49, 2008. View at Publisher · View at Google Scholar · View at Scopus
- J.-J. Hwang and T.-W. Ma, “Preparation, morphology, and antibacterial properties of polyacrylonitrile/montmorillonite/silver nanocomposites,” Materials Chemistry and Physics, vol. 136, no. 2-3, pp. 613–623, 2012. View at Publisher · View at Google Scholar · View at Scopus
- W. G. Shim, C. Kim, J. W. Lee et al., “Adsorption characteristics of benzene on electrospun-derived porous carbon nanofibers,” Journal of Applied Polymer Science, vol. 102, no. 3, pp. 2454–2462, 2006. View at Publisher · View at Google Scholar · View at Scopus
- C. Dhand, N. Dwivedi, S. Mishra et al., “Polyaniline-based biosensors,” Nanobiosensors in Disease Diagnosis, vol. 2015, no. 4, pp. 25–46, 2015. View at Publisher · View at Google Scholar
- T. D. Tran, S. Mori, and M. Suzuki, “Plasma modification of polyacrylonitrile ultrafiltration membrane,” Thin Solid Films, vol. 515, no. 9, pp. 4148–4152, 2007. View at Publisher · View at Google Scholar · View at Scopus
- K. Nouzaki, M. Nagata, J. Arai et al., “Preparation of polyacrylonitrile ultrafiltration membranes for wastewater treatment,” Desalination, vol. 144, no. 1–3, pp. 53–59, 2002. View at Publisher · View at Google Scholar · View at Scopus
- I.-C. Kim, H.-G. Yun, and K.-H. Lee, “Preparation of asymmetric polyacrylonitrile membrane with small pore size by phase inversion and post-treatment process,” Journal of Membrane Science, vol. 199, no. 1, pp. 75–84, 2002. View at Publisher · View at Google Scholar · View at Scopus
- H.-A. Tsai, Y.-L. Ye, K.-R. Lee, S.-H. Huang, M.-C. Suen, and J.-Y. Lai, “Characterization and pervaporation dehydration of heat-treatment PAN hollow fiber membranes,” Journal of Membrane Science, vol. 368, no. 1-2, pp. 254–263, 2011. View at Publisher · View at Google Scholar · View at Scopus
- H. Lohokare, Y. Bhole, S. Taralkar, and U. Kharul, “Poly(acrylonitrile) based ultrafiltration membranes: optimization of preparation parameters,” Desalination, vol. 282, pp. 46–53, 2011. View at Publisher · View at Google Scholar · View at Scopus
- P. Wang, Z. Wang, and Z. Wu, “Insights into the effect of preparation variables on morphology and performance of polyacrylonitrile membranes using Plackett-Burman design experiments,” Chemical Engineering Journal, vol. 193-194, pp. 50–58, 2012. View at Publisher · View at Google Scholar · View at Scopus
- S. Yang and Z. Liu, “Preparation and characterization of polyacrylonitrile ultrafiltration membranes,” Journal of Membrane Science, vol. 222, no. 1-2, pp. 87–98, 2003. View at Publisher · View at Google Scholar · View at Scopus
- C.-L. Lai, W.-C. Chao, W.-S. Hung et al., “Physicochemical effects of hydrolyzed asymmetric polyacrylonitrile membrane microstructure on dehydrating butanol,” Journal of Membrane Science, vol. 490, pp. 275–281, 2015. View at Publisher · View at Google Scholar · View at Scopus
- J. Wang, C. O. Too, D. Zhou, and G. G. Wallace, “Novel electrode substrates for rechargeable lithium/polypyrrole batteries,” Journal of Power Sources, vol. 140, no. 1, pp. 162–167, 2005. View at Publisher · View at Google Scholar · View at Scopus
- M. Bengoechea, I. Boyano, O. Miguel et al., “Chemical reduction method for industrial application of undoped polypyrrole electrodes in lithium-ion batteries,” Journal of Power Sources, vol. 160, no. 1, pp. 585–591, 2006. View at Publisher · View at Google Scholar · View at Scopus
- B. D. Malhotra, A. Chaubey, and S. P. Singh, “Prospects of conducting polymers in biosensors,” Analytica Chimica Acta, vol. 578, no. 1, pp. 59–74, 2006. View at Publisher · View at Google Scholar
- M. S. Mansour, M. E. Ossman, and H. A. Farag, “Removal of Cd (II) ion from waste water by adsorption onto polyaniline coated on sawdust,” Desalination, vol. 272, no. 1–3, pp. 301–305, 2011. View at Publisher · View at Google Scholar · View at Scopus
- M. Karimi, M. Mohsen-Nia, and A. Akbari, “Electro-separation of synthetic azo dyes from a simulated wastewater using polypyrrole/polyacrylonitrile conductive membranes,” Journal of Water Process Engineering, vol. 4, pp. 6–11, 2014. View at Publisher · View at Google Scholar · View at Scopus
- A. A. Khan and L. Paquiza, “Characterization and ion-exchange behavior of thermally stable nano-composite polyaniline zirconium titanium phosphate: its analytical application in separation of toxic metals,” Desalination, vol. 265, no. 1-3, pp. 242–254, 2011. View at Publisher · View at Google Scholar · View at Scopus
- R. Li, L. Liu, and F. Yang, “Removal of aqueous Hg(II) and Cr(VI) using phytic acid doped polyaniline/cellulose acetate composite membrane,” Journal of Hazardous Materials, vol. 280, pp. 20–30, 2014. View at Publisher · View at Google Scholar · View at Scopus
- B.-H. Lee, H.-J. Kim, and H.-S. Yang, “Polymerization of aniline on bacterial cellulose and characterization of bacterial cellulose/polyaniline nanocomposite films,” Current Applied Physics, vol. 12, no. 1, pp. 75–80, 2012. View at Publisher · View at Google Scholar · View at Scopus
- S. Vulpe, F. Nastase, C. Nastase, and I. Stamatin, “PAN–PAni nanocomposites obtained in thermocentrifugal fields,” Thin Solid Films, vol. 495, no. 1-2, pp. 113–117, 2006. View at Publisher · View at Google Scholar · View at Scopus
- G. Ciric-Marjanovic, “Recent advances in polyaniline research: polymerization mechanisms, structural aspects, properties and applications,” Synthetic Metals, vol. 177, pp. 1–47, 2013. View at Publisher · View at Google Scholar · View at Scopus
- S. Bhadra, D. Khastgir, N. K. Singha, and J. H. Lee, “Progress in preparation, processing and applications of polyaniline,” Progress in Polymer Science (Oxford), vol. 34, no. 8, pp. 783–810, 2009. View at Publisher · View at Google Scholar · View at Scopus
- Z. M. Tahir, E. C. Alocilja, and D. L. Grooms, “Polyaniline synthesis and its biosensor application,” Biosensors and Bioelectronics, vol. 20, no. 8, pp. 1690–1695, 2005. View at Publisher · View at Google Scholar · View at Scopus
- B. Adhikari and S. Majumdar, “Polymers in sensor applications,” Progress in Polymer Science, vol. 29, no. 7, pp. 699–766, 2004. View at Publisher · View at Google Scholar · View at Scopus
- S. Nambiar and J. T. W. Yeow, “Conductive polymer-based sensors for biomedical applications,” Biosensors and Bioelectronics, vol. 26, no. 5, pp. 1825–1832, 2011. View at Publisher · View at Google Scholar · View at Scopus
- Z. Jin, Y. Su, and Y. Duan, “An improved optical pH sensor based on polyaniline,” Sensors and Actuators B: Chemical, vol. 71, no. 1-2, pp. 118–122, 2000. View at Publisher · View at Google Scholar · View at Scopus
- D. Dutta, T. K. Sarma, D. Chowdhury, and A. Chattopadhyay, “A polyaniline-containing filter paper that acts as a sensor, acid, base, and endpoint indicator and also filters acids and bases,” Journal of Colloid and Interface Science, vol. 283, no. 1, pp. 153–159, 2005. View at Publisher · View at Google Scholar · View at Scopus
- F. Miao, C. Shao, X. Li et al., “Flexible solid-state supercapacitors based on freestanding electrodes of electrospun polyacrylonitrile@polyaniline core-shell nanofibers,” Electrochimica Acta, vol. 176, pp. 293–300, 2015. View at Publisher · View at Google Scholar · View at Scopus
- W. Pan, S. L. Yang, G. Li, and J. M. Jiang, “Electrical and structural analysis of conductive polyaniline/polyacrylonitrile composites,” European Polymer Journal, vol. 41, no. 9, pp. 2127–2133, 2005. View at Publisher · View at Google Scholar · View at Scopus
- S. J. Lee, H. J. Oh, H. A. Lee, and K. S. Ryu, “Fabrication and physical properties of conductive polyacrylonitrile-polyaniline derivative fibers,” Synthetic Metals, vol. 135-136, pp. 399–400, 2003. View at Publisher · View at Google Scholar · View at Scopus
- G. Zhai, Q. Fan, Y. Tang, Y. Zhang, D. Pan, and Z. Qin, “Conductive composite films composed of polyaniline thin layers on microporous polyacrylonitrile surfaces,” Thin Solid Films, vol. 519, no. 1, pp. 169–173, 2010. View at Publisher · View at Google Scholar · View at Scopus
- A. A. Khan and M. Khalid, “Preparation, FTIR spectroscopic characterization and isothermal stability of differently doped conductive fibers based on polyaniline and polyacrylonitrile,” Synthetic Metals, vol. 160, no. 7-8, pp. 708–712, 2010. View at Publisher · View at Google Scholar · View at Scopus
- H. Xue and Z. Shen, “A highly stable biosensor for phenols prepared by immobilizing polyphenol oxidase into polyaniline-polyacrylonitrile composite matrix,” Talanta, vol. 57, no. 2, pp. 289–295, 2002. View at Publisher · View at Google Scholar · View at Scopus
- Y. H. Park and C. R. Park, “Preparation of conducting polyacrylonitrile/polyaniline composite films by electrochemical synthesis and their electroactivity,” Synthetic Metals, vol. 118, no. 1-3, pp. 187–192, 2001. View at Publisher · View at Google Scholar · View at Scopus
- G. Bayramoglu, A. Ü. Metin, and M. Y. Arica, “Surface modification of polyacrylonitrile film by anchoring conductive polyaniline and determination of uricase adsorption capacity and activity,” Applied Surface Science, vol. 256, no. 22, pp. 6710–6716, 2010. View at Publisher · View at Google Scholar · View at Scopus
- R. Fryczkowski, M. Gorczowska, B. Fryczkowska, and J. Janicki, “The effect of solvent on the properties of nanofibres obtained by electrospinning from a mixture of poly(3-hydroxybutyrate) and polyaniline,” Synthetic Metals, vol. 166, no. 1, pp. 14–21, 2013. View at Publisher · View at Google Scholar · View at Scopus
- B. Fryczkowska, M. Sieradzka, E. Sarna, R. Fryczkowski, and J. Janicki, “Influence of a graphene oxide additive and the conditions of membrane formation on the morphology and separative properties of poly(vinylidene fluoride) membranes,” Journal of Applied Polymer Science, vol. 132, no. 46, Article ID 42789, 2015. View at Publisher · View at Google Scholar · View at Scopus
- S. Zinadini, A. A. Zinatizadeh, M. Rahimi, V. Vatanpour, and H. Zangeneh, “Preparation of a novel antifouling mixed matrix PES membrane by embedding graphene oxide nanoplates,” Journal of Membrane Science, vol. 453, pp. 292–301, 2014. View at Publisher · View at Google Scholar · View at Scopus
- Y. Feng, G. Han, L. Zhang et al., “Rheology and phase inversion behavior of polyphenylenesulfone (PPSU) and sulfonated PPSU for membrane formation,” Polymer, vol. 99, pp. 72–82, 2016. View at Publisher · View at Google Scholar · View at Scopus
- D. Pal, S. Neogi, and S. De, “Surface modification of polyacrylonitrile co-polymer membranes using pulsed direct current nitrogen plasma,” Thin Solid Films, vol. 597, pp. 171–182, 2015. View at Publisher · View at Google Scholar · View at Scopus
- Z. Fan, Z. Wang, M. Duan, J. Wang, and S. Wang, “Preparation and characterization of polyaniline/polysulfone nanocomposite ultrafiltration membrane,” Journal of Membrane Science, vol. 310, no. 1-2, pp. 402–408, 2008. View at Publisher · View at Google Scholar · View at Scopus
- J. Ren and J. R. McCutcheon, “Polyacrylonitrile supported thin film composite hollow fiber membranes for forward osmosis,” Desalination, vol. 372, pp. 67–74, 2015. View at Publisher · View at Google Scholar · View at Scopus
- A. G. MacDiarmid and A. J. Epstein, “Secondary doping in polyaniline,” Synthetic Metals, vol. 69, no. 1-3, pp. 85–92, 1995. View at Publisher · View at Google Scholar · View at Scopus
- A. T. Hoang, Y. B. Cho, J.-S. Park, Y. Yang, and Y. S. Kim, “Sensitive naked-eye detection of gaseous ammonia based on dye-impregnated nanoporous polyacrylonitrile mats,” Sensors and Actuators, B: Chemical, vol. 230, pp. 250–259, 2016. View at Publisher · View at Google Scholar · View at Scopus