Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2017, Article ID 4308687, 6 pages
https://doi.org/10.1155/2017/4308687
Research Article

Structural Foams of Biobased Isosorbide-Containing Copolycarbonate

1Fraunhofer Institute for Environmental, Safety and Energy Technology (Fraunhofer UMSICHT), Oberhausen, Germany
2Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts, RWTH Aachen University, Aachen, Germany

Correspondence should be addressed to Stephan Kabasci; ed.refohnuarf.thcismu@icsabak.nahpets

Received 8 May 2017; Accepted 17 August 2017; Published 20 September 2017

Academic Editor: Vinay Sharma

Copyright © 2017 Stefan Zepnik et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Maćczak, M. Cyrkler, B. Bukowska, and J. Michałowicz, “Eryptosis-inducing activity of bisphenol A and its analogs in human red blood cells (in vitro study),” Journal of Hazardous Materials, vol. 307, pp. 328–335, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. E. B. Yalcin, S. R. Kulkarni, A. L. Slitt, and R. King, “Bisphenol A sulfonation is impaired in metabolic and liver disease,” Toxicology and Applied Pharmacology, vol. 292, pp. 75–84, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. H. H. Le, E. M. Carlson, J. P. Chua, and S. M. Belcher, “Bisphenol A is released from polycarbonate drinking bottles and mimics the neurotoxic actions of estrogen in developing cerebellar neurons,” Toxicology Letters, vol. 176, no. 2, pp. 149–156, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. L. N. Vandenberg, R. Hauser, M. Marcus, N. Olea, and W. V. Welshons, “Human exposure to bisphenol A (BPA),” Reproductive Toxicology, vol. 24, no. 2, pp. 139–177, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. J.-H. Kang, F. Kondo, and Y. Katayama, “Human exposure to bisphenol A,” Toxicology, vol. 226, no. 2-3, pp. 79–89, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Brouwer, R. D. Van de Grampel, and J. H. Kamps, “Isosorbide-based polycarbonates, method of making, and articles formed therefrom,” in Patent WO 2011/ A1, 2011. View at Google Scholar
  7. H. Brouwer, R. D. Van de Grampel, and J. H. Kamps, “Blends of isosorbide-based copolycarbonate, method of making, and articles formed therefrom,” in Patent WO 2011/ A1, 2011. View at Google Scholar
  8. B. A. J. Noordover, D. Haveman, R. Duchateau, R. A. T. M. Van Benthem, and C. E. Koning, “Chemistry, functionality, and coating performance of biobased copolycarbonates from 1,4:3,6-dianhydrohexitols,” Journal of Applied Polymer Science, vol. 121, no. 3, pp. 1450–1463, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. C.-H. Lee, M. Kato, and A. Usuki, “Preparation and properties of bio-based polycarbonate/clay nanocomposites,” Journal of Materials Chemistry, vol. 21, no. 19, pp. 6844–6847, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. C.-H. Lee, H. Takagi, H. Okamoto, and M. Kato, “Improving the mechanical properties of isosorbide copolycarbonates by varying the ratio of comonomers,” Journal of Applied Polymer Science, vol. 127, no. 1, pp. 530–534, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. Q. Li, W. Zhu, C. Li et al., “A non-phosgene process to homopolycarbonate and copolycarbonates of isosorbide using dimethyl carbonate: Synthesis, characterization, and properties,” Journal of Polymer Science, Part A: Polymer Chemistry, vol. 51, no. 6, pp. 1387–1397, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. T. Takashima, K. Yamaoka, and T. Ishikawa, Foam molded body. Patent application WO2013031924 A1, 2013.
  13. L. F. Sastre, Effects of the foam morphology on the mechanical properties of structural polymer foams [Dissertation, thesis], RWTH Aachen, 2011.
  14. A. Cramer, Analysis and optimization of the part properties in thermoplastic foam injection moulding [Dissertation, thesis], RWTH Aachen, 2008.
  15. W. Michaeli, C. Hopmann, and D. Obeloer, “Examinations on the influencing factors on the foamability using the profoam process,” in Proceedings of the 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011, pp. 1551–1556, Boston, Mass, USA, May 2011. View at Scopus
  16. A. K. Bledzki, H. Kirschling, M. Rohleder, and A. Chate, “Correlation between injection moulding parameters, morphology and properties of microcellular polycarbonate foams,” in Proceedings of the 10th Rapra Blowing Agents and Foaming Processes, Berlin, Germany, 2008.
  17. Mitsubishi Chemical Corporation: Durabio Material Properties, 2015, http://www.jimshin.com/UploadFiles/DURABIO20151111v3Eng.pdf.
  18. DIN EN ISO 75-2:2013. Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite.
  19. N.N.: PALMAROLE MB.BA.16. Adeka Palmarole SAS, Mulhouse (France), 2008.
  20. V. Volpe and R. Pantani, “Foam injection molding of poly(lactic) acid: effect of back pressure on morphology and mechanical properties,” Journal of Applied Polymer Science, vol. 132, pp. 42612–42619, 2015. View at Publisher · View at Google Scholar
  21. F. J. Gómez-Gómez, D. Arencón, M. Á. Sánchez-Soto, and A. B. Martínez, “Influence of the injection moulding parameters on the microstructure and thermal properties of microcellular polyethylene terephthalate glycol foams,” Journal of Cellular Plastics, vol. 49, no. 1, pp. 47–63, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. J. F. Gómez-Gómez, D. Arencón, M. A. Sánchez-Soto, and A. B. Martínez, “Influence of the injection-molding parameters on the cellular structure and thermo-mechanical properties of ethylene-propylene block copolymer foams,” Advances in Polymer Technology, vol. 32, no. 1, pp. E692–E704, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. R. Pantani, V. Volpe, and G. Titomanlio, “Foam injection molding of poly(lactic acid) with environmentally friendly physical blowing agents,” Journal of Materials Processing Technology, vol. 214, no. 12, pp. 3098–3107, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. V. K. Stokes, “Local stiffness-density correlations for polycarbonate structural foams,” Journal of Materials Science, vol. 35, no. 1, pp. 159–178, 2000. View at Publisher · View at Google Scholar · View at Scopus
  25. J. Müller, A. Spörrer, and V. Altstädt, “Overmoulding of plane structural foamed parts with a second thermoplastic component,” Cell Polym, vol. 31, pp. 223–240, 2012. View at Google Scholar
  26. N. Müller, Spritzgegossene Integralschaumstrukturen mit ausgeprägter Dichtereduktion; Universität Erlangen-Nürnberg, [Dissertation, thesis], 2006, ISBN: 3-931864-25-1.