Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2017, Article ID 5745878, 7 pages
https://doi.org/10.1155/2017/5745878
Research Article

The Effect of Masterbatch Recipes on the Homogenization Properties of Injection Molded Parts

Department of Polymer Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Muegyetem Rkp. 3, Budapest 1111, Hungary

Correspondence should be addressed to József Gábor Kovács; uh.emb.tp@scavok

Received 12 December 2016; Revised 8 March 2017; Accepted 29 March 2017; Published 3 May 2017

Academic Editor: Ulrich Maschke

Copyright © 2017 László Zsíros et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

László Zsíros, Dániel Török, and József Gábor Kovács, “The Effect of Masterbatch Recipes on the Homogenization Properties of Injection Molded Parts,” International Journal of Polymer Science, vol. 2017, Article ID 5745878, 7 pages, 2017. https://doi.org/10.1155/2017/5745878.