Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2017, Article ID 8745405, 12 pages
https://doi.org/10.1155/2017/8745405
Research Article

Effect of Bolt-Hole Clearance on Bolted Connection Behavior for Pultruded Fiber-Reinforced Polymer Structural Plastic Members

1Department of Civil Engineering, Hongik University, Seoul 04066, Republic of Korea
2Department of Architectural Engineering, Gachon University, 1342 Seongnam-daero, Sujeong-gu, Seongnam-si, Gyeonggi-do 13120, Republic of Korea

Correspondence should be addressed to Wonchang Choi; moc.liamg@iohc.gnahcnow

Received 11 March 2017; Revised 22 May 2017; Accepted 5 July 2017; Published 6 August 2017

Academic Editor: Reza Aliha

Copyright © 2017 Sang-Pyuk Woo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Feo, G. Marra, and A. S. Mosallam, “Stress analysis of multi-bolted joints for FRP pultruded composite structures,” Composite Structures, vol. 94, no. 12, pp. 3769–3780, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. M. C. Wang, Connection capacity of pultruded gfrp channels in multidirectional loading [M.S. Thesis], University of Colorado, 2013.
  3. M. Shokrieh and M. Heidari-rarani, “Experimental and analytical studies on one-way concrete slabs reinforced with GFRP molded gratings,” Steel and Composite Structures, vol. 9, no. 6, pp. 569–584, 2009. View at Google Scholar
  4. CN. Rosner, Single-bolted connections for orthotropic fibre-reinforced composite structural members [M. S.Thesis], University of Manitoba, 1992.
  5. B. Vangrimde and R. Boukhili, “Descriptive relationships between bearing response and macroscopic damage in GRP bolted joints,” Composites Part B: Engineering, vol. 34, no. 7, pp. 593–605, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. C. N. Rosner and S. H. Rizkalla, “Bolted connections for fiber-reinforced composite structuralmembers: Experimental program,” Journal of Materials in Civil Engineering, vol. 7, no. 4, pp. 223–231, 1995. View at Publisher · View at Google Scholar · View at Scopus
  7. S. F. M. Abd-El-Naby and L. Hollaway, “The experimental behaviour of bolted joints in pultruded glass/ polyester material. Part 1: Single-bolt joints,” Composites, vol. 24, no. 7, pp. 531–538, 1993. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Cooper and G. J. Turvey, “Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material,” Composite Structures, vol. 32, no. 1-4, pp. 217–226, 1995. View at Publisher · View at Google Scholar · View at Scopus
  9. G. J. Turvey, “Single-bolt tension joint tests on pultruded GRP plate - effects of tension direction relative to pultrusion direction,” Composite Structures, vol. 42, no. 4, pp. 341–351, 1998. View at Publisher · View at Google Scholar · View at Scopus
  10. Ü. Esendemir, “An experimental study of mechanically fastened composite joints with clearance,” International Journal of Damage Mechanics, vol. 20, no. 3, pp. 464–480, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. F. Sen, M. Pakdil, O. Sayman, and S. Benli, “Experimental failure analysis of mechanically fastened joints with clearance in composite laminates under preload,” Materials & Design, vol. 29, no. 6, pp. 1159–1169, 2008. View at Google Scholar
  12. J. T. Mottram and G. J. Turvey, “Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems,” Progress in Structural Engineering and Materials, vol. 5, no. 4, pp. 195–222, 2003. View at Google Scholar
  13. Eurocomp Design Code and Handbook. Structural Design of Polymer Composites, The European Structural Polymeric Composites Group, 1996.
  14. Technical Document, “Guide for the Design and Construction of Structures Made of FRP Pultruded Elements,” Tech. Rep. CNR-DT 205/2007, Italian National Research Council (CNR), Rome, Italy, 2008. View at Google Scholar
  15. J. T. Mottram, “Design guidance for bolted connections in structures of pultruded shapes: gaps in knowledge,” in Proceedings of the 4th International Conference on Advanced Composites in Construction (ACIC 2009), pp. 483–495, NetComposites Ltd, Chesterfield, UK, 2009.
  16. V. P. Lawlor, M. A. McCarthy, and W. F. Stanley, “An experimental study of bolt-hole clearance effects in double-lap, multi-bolt composite joints,” Composite Structures, vol. 71, no. 2, pp. 176–190, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. T. A. D. Tajeuna, F. Légeron, S. Langlois, P. Labossière, and M. Demers, “Effect of geometric parameters on the behavior of bolted GFRP pultruded plates,” Journal of Composite Materials, vol. 50, no. 26, pp. 3731–3749, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Xiao and T. Ishikawa, “Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation),” Composites Science and Technology, vol. 65, no. 7-8, pp. 1022–1031, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Kelly and S. Hallström, “Bearing strength of carbon fibre/epoxy laminates: Effects of bolt-hole clearance,” Composites Part B: Engineering, vol. 35, no. 4, pp. 331–343, 2004. View at Publisher · View at Google Scholar · View at Scopus
  20. M. A. McCarthy, V. P. Lawlor, W. F. Stanley, and C. T. McCarthy, “Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints,” Composites Science and Technology, vol. 62, no. 10-11, pp. 1415–1431, 2002. View at Publisher · View at Google Scholar · View at Scopus
  21. ASTM, “Standard test method for bearing response of polymer matrix composite laminates,” ASTM International 5961/D 5961 M-05, West Conshohocken, PA, USA, 2005. View at Google Scholar
  22. F. Ascione, L. Feo, and F. Maceri, “An experimental investigation on the bearing failure load of glass fibre/epoxy laminates,” Composites Part B: Engineering, vol. 40, no. 3, pp. 197–205, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. A. A. Pisano, P. Fuschi, and D. De Domenico, “A layered limit analysis of pinned-joints composite laminates: Numerical versus experimental findings,” Composites Part B: Engineering, vol. 43, no. 3, pp. 940–952, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. A. S. Mosallam, “Design for FRP composite connections,” ASCE Manuals and Reports on Engineering Practice, 2011. View at Google Scholar
  25. Y.-G. Lee, E. Choi, and S.-J. Yoon, “Effect of geometric parameters on the mechanical behavior of PFRP single bolted connection,” Composites Part B: Engineering, vol. 75, pp. 1–10, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. ASTM, “Standard test method for tensile properties of polymer matrix composite materials,” ASTM International 3039/D 3039 M-08, West Conshohocken, PA, USA, 2008. View at Google Scholar
  27. S. J. Yoon, Local buckling of pultruded I-shape columns [Ph.D. thesis], Georgia Institute of Techonlogy, Atlanta, GA, USA.
  28. Y. G. Lee, J. S. Park, J. H. Nam, D. J. An, and S-J. Yoon, “Structural behavior of PFRP connection with single bolt,” in Proceedings of the 18th International Conference on Composite Materials (ICCM' 18), pp. 1–5, Jeju Island, Korea, August 2011.
  29. ASTM, “Standard test method for shear properties of composite materials by the V-notched beam method,” ASTM International D 5379/D 5379 M-12, West Conshohocken, PA, USA, 2012. View at Google Scholar
  30. KS B 1002. Hexagon Head Bolts and Hexagon Head Screws. Korea: Korean Standards Association, 2001.
  31. KS B 1012. Hexagon Nuts and Hexagon Thin Nuts. Korea: Korean Standards Association, 2001.
  32. KS B 1326. Plain Washers. Korea: Korean Standards Association, 2009.
  33. ASTM, “Standard test method for bearing strength of plastics,” ASTM International D 953-10, West Conshohocken, PA, USA, 2010. View at Google Scholar
  34. H. Choi, J. W. Choi, H. J. Joo, D. J. An, and S-J. Yoon, “Effects of material properties variations on the local buckling loads of pultruded structural shapes,” Journal of Computational Design and Engineering, vol. 1, pp. 645–648, 2009. View at Google Scholar