Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2019, Article ID 2152408, 7 pages
https://doi.org/10.1155/2019/2152408
Research Article

Investigation of Epoxidized Palm Oils as Green Processing Aids and Activators in Rubber Composites

1Department of Advanced Materials Engineering, Chungbuk National University, Chungdae-ro 1, Seowon-Gu, Cheongju, Chungbuk 34057, Republic of Korea
2Division of Advanced Materials Engineering, Kongju National University, Gongju, Chungnam 330-717, Republic of Korea

Correspondence should be addressed to Sung Ho Song; moc.liamg@508gnoshs

Received 14 September 2018; Revised 25 November 2018; Accepted 9 April 2019; Published 5 May 2019

Academic Editor: Marta Fernández-García

Copyright © 2019 DongJu Lee and Sung Ho Song. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. J. Wang, H. Y. Gong, and G. Z. Xue, Handbook of Rubber Industry, Chemical Industry Press, 2nd edition, 1989.
  2. R. Faez and M.-A. de Paoli, “Elastic polyaniline with EPDM and dodecylbenzenesulfonic acid as plasticizers,” Journal of Applied Polymer Science, vol. 82, no. 7, pp. 1768–1775, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. G. Wypych, Handbook of Plasticizers, Chem Tec Publishing, Canada, 2004.
  4. J. W. ten Brinke, S. C. Debnath, L. A. E. M. Reuvekamp, and J. W. M. Noordermeer, “Mechanistic aspects of the role of coupling agents in silica-rubber composites,” Composites Science and Technology, vol. 63, no. 8, pp. 1165–1174, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Dasgupta, S. L. Agrawal, S. Bandyopadhyay et al., “Characterization of eco-friendly processing aids for rubber compound,” Polymer Testing, vol. 26, no. 4, pp. 489–500, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. L. G. Parks, J. S. Ostby, C. R. Lambright et al., “The plasticizer diethylhexyl phthalate induces malformations by decreasing fetal testosterone synthesis during sexual differentiation in the male rat,” Toxicological Sciences, vol. 58, no. 2, pp. 339–349, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Rahman and C. S. Brazel, “Review: an assessment of traditional plasticizers and research trends for development of novel plasticizers,” Progress in Polymer Science, vol. 29, no. 12, pp. 1223–1248, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Dasgupta, S. L. Agrawal, S. Bandyopadhyay, R. Mukhopadhyay, R. K. Malkani, and S. C. Ameta, “Improved polymer–filler interaction with an ecofriendly processing aid. Part 1,” Progress in Rubber, Plastics and Recycling Technology, vol. 25, no. 3, pp. 141–164, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. A. P. Kuriakose and M. Varghese, “Use of rice bran oil and epoxidized rice bran oil in carbon black-filled natural rubber polychloroprene blends,” Journal of Applied Polymer Science, vol. 90, no. 14, pp. 4084–4092, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Xu, Z. Liu, S. Z. Erhan, and C. J. Carriere, “A potential biodegradable rubber—viscoelastic properties of a soybean oil-based composite,” Journal of the American Oil Chemists’ Society, vol. 79, no. 6, pp. 593–596, 2002. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Miyagawa, R. J. Jurek, A. K. Mohanty, M. Misra, and L. T. Drzal, “Biobased epoxy/clay nanocomposites as a new matrix for CFRP,” Composites Part A: Applied Science and Manufacturing, vol. 37, no. 1, pp. 54–62, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. I. Hilker, D. Bothe, J. Prüss, and H. J. Warnecke, “Chemo-enzymatic epoxidation of unsaturated plant oils,” Chemical Engineering Science, vol. 56, no. 2, pp. 427–432, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. B. Lin, L. Yang, H. Dai, and A. Yi, “Kinetic studies on oxirane cleavage of epoxidized soybean oil by methanol and characterization of polyols,” Journal of the American Oil Chemists’ Society, vol. 85, no. 2, pp. 113–117, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. W. He, Z. Fang, D. Ji et al., “Epoxidation of soybean oil by continuous micro-flow system with continuous separation,” Organic Process Research & Development, vol. 17, no. 9, pp. 1137–1141, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Jacob, S. Thomas, and K. T. Varughese, “Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites,” Composites Science and Technology, vol. 64, no. 7-8, pp. 955–965, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Rüsch gen. Klaas and S. Warwel, “Complete and partial epoxidation of plant oils by lipase-catalyzed perhydrolysis,” Industrial Crops and Products, vol. 9, no. 2, pp. 125–132, 1999. View at Publisher · View at Google Scholar · View at Scopus
  17. W. D. W. Rosli, R. N. Kumar, S. M. Zah, and M. M. Hilmi, “UV radiation curing of epoxidized palm oil-cycloaliphatic diepoxide system induced by cationic photoinitiators for surface coatings,” European Polymer Journal, vol. 39, no. 3, pp. 593–600, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. W. G. D. Jayewardhana, G. M. Perera, D. G. Edirisinghe, and L. Karunanayake, “Study on natural oils as alternative processing aids and activators in carbon black filled natural rubber,” Journal of the National Science Foundation of Sri Lanka, vol. 37, no. 3, pp. 187–193, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. S. H. Song, “The effect of palm oil-based hybrid oils as green multifunctional oils on the properties of elastomer composites,” Polymers, vol. 10, no. 9, pp. 1045–1054, 2018. View at Publisher · View at Google Scholar
  20. G. Chandrasekara, M. K. Mahanama, D. G. Edirisinghe, and L. Karunanayake, “Epoxidized vegetable oils as processing aids and activators in carbon-black filled natural rubber compounds,” Journal of the National Science Foundation of Sri Lanka, vol. 39, no. 3, pp. 243–250, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. S. H. Song, “Synergistic effect of clay platelets and carbon nanotubes in styrene–butadiene rubber nanocomposites,” Macromolecular Chemistry and Physics, vol. 217, no. 23, pp. 2617–2625, 2017. View at Publisher · View at Google Scholar · View at Scopus
  22. O.-S. Kwon, D. Lee, S. P. Lee, Y. G. Kang, N. C. Kim, and S. H. Song, “Enhancing the mechanical and thermal properties of boron nitride nanoplatelets/elastomer nanocomposites by latex mixing,” RSC Advances, vol. 6, no. 65, pp. 59970–59975, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. S. H. Song, J. M. Kim, K. H. Park et al., “High performance graphene embedded rubber composites,” RSC Advances, vol. 5, no. 99, pp. 81707–81712, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. S. H. Song, H. K. Jeong, and Y. G. Kang, “Preparation and characterization of exfoliated graphite and Its styrene butadiene rubber nanocomposites,” Journal of Industrial and Engineering Chemistry, vol. 16, no. 6, pp. 1059–1065, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. K. P. Menard and N. R. Menard, “Dynamic mechanical analysis in the analysis of polymers and rubbers,” Encyclopedia of Polymer Science and Technology, no. 42, pp. 1–33, 2015. View at Google Scholar
  26. S. H. Song, K. H. Park, B. H. Kim et al., “Enhanced thermal conductivity of epoxy–graphene composites by using non-oxidized graphene flakes with non-covalent functionalization,” Advanced Materials, vol. 25, no. 5, pp. 732–737, 2013. View at Publisher · View at Google Scholar · View at Scopus
  27. M. Piton and A. Rivaton, “Photo-oxidation of ABS at long wavelengths (λ > 300 nm),” Polymer Degradation and Stability, vol. 55, no. 2, pp. 147–157, 1997. View at Publisher · View at Google Scholar
  28. F. Delor, J. Lacoste, J. Lemaire, N. Barrois-Oudin, and C. Cardinet, “Photo- and thermal ageing of polychloroprene: effect of carbon black and crosslinking,” Polymer Degradation and Stability, vol. 53, no. 3, pp. 361–369, 1996. View at Publisher · View at Google Scholar · View at Scopus
  29. J. A. Bousquet and J. P. Fouassier, “Photo-oxidation of a random styrene-butadiene copolymer: role of hydroperoxides and behaviour of butenyl segments,” European Polymer Journal, vol. 23, no. 5, pp. 367–376, 1987. View at Publisher · View at Google Scholar · View at Scopus
  30. C. Adam, J. Lacoste, and J. Lemaire, “Photo-oxidation of elastomeric materials: part II–photo-oxidation of styrene-butadiene copolymer,” Polymer Degradation and Stability, vol. 26, no. 3, pp. 269–284, 1989. View at Publisher · View at Google Scholar · View at Scopus
  31. T. M. Arantes, K. V. Leao, M. I. B. Tavares, A. G. Ferreira, E. Longo, and E. R. Camargo, “NMR study of styrene-butadiene rubber (SBR) and TiO2 nanocomposites,” Polymer Testing, vol. 28, no. 5, pp. 490–494, 2009. View at Publisher · View at Google Scholar · View at Scopus