International Journal of Polymer Science
 Journal metrics
See full report
Acceptance rate27%
Submission to final decision86 days
Acceptance to publication18 days
CiteScore5.500
Journal Citation Indicator0.510
Impact Factor3.3

Evaluation of Monomer Releasing from Dentin Replacement Materials

Read the full article

 Journal profile

International Journal of Polymer Science publishes research on the chemistry and physics of macromolecules, including the synthesis and characterisation of polymeric materials and polymerisation processes, both theoretical and experimental.

 Editor spotlight

Chief Editor Dr. Qinglin Wu is Gordon Cain Chair and Roy O. Martin Sr. Professor at the Louisiana State University Agricultural Center. His current research focus on sustainable nanomaterials as building blocks for composites, fluids, and energy storage materials.

 Special Issues

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.

Latest Articles

More articles
Research Article

Antiacne Gel Containing Aloe vera and Clindamycin Phosphate: Design, Characterization, and Optimization Using Response Surface Methodology

Clindamycin phosphate is a topical antibiotic agent used to treat acne vulgaris, while Aloe vera has both antimicrobial and anti-inflammatory properties. The current study is aimed at formulating an antiacne gel with antioxidant and antimicrobial effects. The antiacne gels were prepared by using polymer HPMC K15M by cold dispersion method. Unveiling the intricacies of gel design, our research harnessed the power of Design Expert 11 to optimize critical parameters—viscosity, spreadability, and permeability. In vitro characterization tests, including pH, spreadability, viscosity, permeability, antimicrobial activity, antioxidant activity, and stability of the gels, were performed. The results of in vitro characterization tests showed that the gels had a mint-like odor, a pH of 6.8, and a spreadability of 21.5 g cm/sec. The gels had a viscosity of 34.2 Pa s and drug content ranging within 90%-110%, as per USP standards. Notably, in vitro permeation assays reveal an exceptional 86% drug release, showcasing the efficacy of our formulation. The uniqueness of our study lies not only in the robust optimization process but also in the multifaceted characterization. Our gel emerges as a promising candidate, exhibiting not only desired antimicrobial and antioxidant properties against acne vulgaris but also demonstrating stability under varied conditions. As we advance toward in vivo studies, our research paves the way for a nuanced understanding of the safety and efficacy of this distinctive antiacne gel.

Research Article

Determination of Dynamic Mechanical Properties on Addition of Carbon Black-Nanosilica Hybrid Fillers in NR-SBR Blends with Special Reference to Power Transmission Belt Applications

Next to tyres, power transmission belts are one of the most complicated rubber products which is having a constant increase for demand in the market. Due to this high demand along with the requirement to meet certain special operating conditions, it is necessary to improve the belt properties continuously. In the last few decades, nanotechnology evolved as a suitable method for enhancing the properties of various rubber products without impacting the environment. Nanofillers which are having unique morphology along with excellent properties help to reduce the dependency in petroleum products and in turn make the products more sustainable. Even though, studies related to the usage of nanotechnology in the power transmission belt division are very limited. So, in this study, the effect of nanosilica on the dynamic mechanical properties of the natural rubber- (NR-) styrene butadiene rubber (SBR) blends is thoroughly studied with special reference to power transmission belt applications. The developed composites were analysed to ensure the rheological, mechanical, and morphological properties in comparison with the controlled samples. The nanosilica-based belt properties were analysed in reference with regular carbon black-filled belts, and a 15% improvement in belt life was obtained for newly developed belts.

Review Article

Biopolymer Composite Materials in Oil and Gas Sector

In the oil and gas industry, the demand for alternative materials is rising due to corrosion and the desire to reduce costs through weight reduction. Polymer composites are gaining attention for their corrosion resistance, favourable strength-to-weight ratio, and cost-effectiveness. The biopolymer composite is projected to have an output worth $4.95 billion between 2021 and 2025 and growth at a 5.38% compound annual growth rate. This review focuses on exploring the potential of natural fibres as reinforcement for biofibre polymer composite pipes in oil and gas, highlighting their ecofriendliness, biodegradability, and cost-efficiency. The paper assesses biopolymer composite pipes’ development, challenges, and applications, particularly those using continuous basalt and banana fibres. While basalt fibre has found field applications, banana fibre-reinforced polymer composites are still in the early research stages. Despite significant oil and gas industry players already endorsing polymer composites, further research is needed for biopolymer composites to address challenges like compatibility, environmental impact, standardisation, long-term durability, production processes, and regulatory acceptance. Advancing biocomposite research and exploring new research opportunities are essential for engineering advancements and advanced materials.

Research Article

Investigation of the Impact of Chemical Modifications on the Photostability of Polymethyl Methacrylate

For practical application, it is crucial to ensure that polymeric materials are protected against degradation due to aging and ultraviolet (UV) irradiation. A range of advancements in developing novel photostabilizers has been made in the last few years. Another approach is the alteration of polymer structures to enhance their ability to resist photodegradation and photooxidation on exposure to UV light for extended periods in harsh conditions. Polymeric chain modifications have proved to be efficient in increasing the photostability of materials. The current work deals with the surface functionalization of polymethyl methacrylate (PMMA) by incorporating organotin moieties on the polymer backbone. PMMA reacts with ethylenediamine to attach amino groups to the polymer chains. The amino group reacts with 2-hydroxynaphthaldehyde to produce the corresponding Schiff base. Adding trisubstituted (methyl, butyl, and phenyl) tin chloride led to the addition of organometallic residence to the polymeric chains. Thin films of the modified PMMA were made and irradiated with ultraviolet light for long durations to test the effect of chain modification on the photostability of polymeric materials. The effect of the substituent on the tin atom on the photostability of PMMA has been analyzed. Various methods were used for assessment, including infrared spectroscopy, weight loss, surface morphology, and roughness factor. The modified polymers showed increased resistance to photodegradation and had lower roughness factor, weight reduction, surface damages, and small fragments generated compared to the blank PMMA. The polymer containing phenyl substituents showed the most apparent photostabilization effect and the least destructive changes in the PMMA surface on photoirradiation.

Research Article

Design of Novel Poly(Propranolol) Acrylate and Methacrylate Polymers through Radical Polymerization for Antibacterial Activity and Metal Ion Absorption

The monomer 1-(isopropylamino)-3-(1-naphthyloxy)-2-propanoacrylate (IANOPA) and monomer 1-(isopropylamino)-3-(1-naphthyloxy)-2-propanomethacrylate (IANOPMA) were synthesized by treating 1-(isopropylamino)-3-(1-naphthyloxy)-2-propanol with acryloylchloride/methacryloyl chloride. The above esterification reactions were carried out in the presence of triethylamine. By employing the free radical polymerization method, the synthesized monomers were converted into polymers by using an initiator 2, 2-azobisisobutyronitrile in the presence of nitrogen environment at °C. The monomers and polymers were characterized by various techniques such as FT-IR, UV, 1H NMR, and 13C NMR spectroscopic analyses. Further, differential scanning calorimetry (DSC) was used to estimate the glass transition temperature (). Gel permeation chromatography (GPC) was used to estimate the molecular weight of the polymers. In addition, monomer and polymer surfaces’ morphology was analyzed using SEM analysis. As a primary application, the effectiveness of synthesized monomers and polymers was explored as antibacterial agents against gram-positive bacteria (Staphylococcus aureus) and gram-negative bacteria (Pseudomonas aeruginosa) which were measured from their inhibitory zone diameters. Further, the synthesized polymers, poly-IANOPA and poly-IANOPMA, were utilized for the uptake ability study of heavy metal ions such as Zn2+, Cu2+, Ni2+, and Pb2+ present in water sources by equilibrium method.

Research Article

Optimized Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Production by Moderately Haloalkaliphilic Bacterium Halomonas alkalicola Ext

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible polymers that are produced by microorganisms as storage materials under limited nutrition and excess carbon. These PHAs have been found to be ideal for replacing synthetic plastics for use in packaging and biomedical applications. In this study, an alkaliphilic and moderately halophilic bacterium Halomonas alkalicola Ext was isolated from Lake Simbi Nyaima in western Kenya and investigated for PHA production. Sudan Black B and Nile Red A staining showed that bacterium had distinct ability for accumulation of PHAs. To optimize PHA production, the bacterium was grown in submerged fermentation under varying culture conditions and different sources and concentrations of carbon and nitrogen. With one-factor-at-a-time (OFTA) approach, optimal PHA yields were obtained after 72 hours at a pH of 10.0, temperature of 35°C, and 2.5% (w/v) NaCl. The bacterium yielded the highest biomass, and PHA amounts on 2% galactose and 0.1% ammonium sulfate as sources of carbon and nitrogen, respectively. A record PHA yield of 0.071 g g-1 with a titer of was achieved from 3.397 g/L of biomass, equivalent to 41.8% PHA content. Using response surface methodology, PHA titer was increased by 1.5% to 1.44 g/L, while PHA content was improved 1.1-fold to 45.57%. Polymer analysis revealed that the extracted PHA was a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) () with two copolymer subunits of 3-hydroxyvaryrate (3-HB) and 3-hydroxybutyrate (3-HV). Halomonas alkalicola Ext attained efficient galactose conversion into PHBV under high salinity and alkalinity conditions.

International Journal of Polymer Science
 Journal metrics
See full report
Acceptance rate27%
Submission to final decision86 days
Acceptance to publication18 days
CiteScore5.500
Journal Citation Indicator0.510
Impact Factor3.3
 Submit Check your manuscript for errors before submitting

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.