Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 7, Issue 5, Pages 351-364
http://dx.doi.org/10.1155/S1023621X0100029X

Fluid Flow and Heat Transfer in an Internal Coolant Passage

1Department of Mechanical Engineering, Michigan State University, East Lansing, 48824-1226, Michigan, USA
2Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh 15213-3890, Pennsylvania, USA

Received 22 March 1999; Revised 15 June 2000

Copyright © 2001 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [14 citations]

The following is the list of published articles that have cited the current article.

  • Xubin Gu, H.-W. Wu, S. Shen, and Tom Shih, “Numerical Simulation of Flow and Heat Transfer in a Duct with Square Ribs and Bleed Holes,” 42nd AIAA Aerospace Sciences Meeting and Exhibit, . View at Publisher · View at Google Scholar
  • Gu, Wu, Schock, and Shih, “Two-equation versus Reynolds-stress modeling in predicting flow and heat transfer in a smooth U-duct with and without rotation,” American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, vol. 3, pp. 1115–1124, 2002. View at Publisher · View at Google Scholar
  • Chi, Dennis, Zhu, Chyu, Bryden, and Shih, “Internal cooling inside an L-shaped duct with pin-fin turbulators under rotating and non-rotating conditions with and without sand particles,” Proceedings of the ASME Turbo Expo, vol. 4, pp. 533–543, 2007. View at Publisher · View at Google Scholar
  • Waseem Siddique, Lamyaa El-Gabry, Igor V. Shevchuk, Narmin B. Hushmandi, and Torsten H. Fransson, “Flow structure, heat transfer and pressure drop in varying aspect ratio two-pass rectangular smooth channels,” Heat and Mass Transfer, vol. 48, no. 5, pp. 735–748, 2011. View at Publisher · View at Google Scholar
  • Hu, Chi, Shih, Bryden, Chyu, Ames, and Dennis, “Flow and heat transfer in the tip-turn region of a U-duct under rotating and non-rotating conditions,” Proceedings of the ASME Turbo Expo, vol. 5, pp. 1421–1433, 2011. View at Publisher · View at Google Scholar
  • Waseem Siddique, Igor V. Shevchuk, Lamyaa El-Gabry, Narmin B. Hushmandi, and Torsten H. Fransson, “On flow structure, heat transfer and pressure drop in varying aspect ratio two-pass rectangular channel with ribs at 45°,” Heat and Mass Transfer, vol. 49, no. 5, pp. 679–694, 2013. View at Publisher · View at Google Scholar
  • Jongmyung Park, Samgyu Park, and P. M. Ligrani, “Numerical predictions of detailed flow structural characteristics in a channel with angled rib turbulators,” Journal of Mechanical Science and Technology, vol. 29, no. 11, pp. 4981–4991, 2015. View at Publisher · View at Google Scholar
  • Prashant Singh, Jaideep Pandit, and Srinath V. Ekkad, “Characterization of heat transfer enhancement and frictional losses in a two-pass square duct featuring unique combinations of rib turbulators and cylindrical dimples,” International Journal of Heat and Mass Transfer, 2016. View at Publisher · View at Google Scholar
  • Brahim Berrabah, and Miloud Aminallah, “Effect of Coriolis and centrifugal forces on flow and heat transfer at high rotation number and high density ratio in non orthogonally internal cooling channel,” Chinese Journal of Aeronautics, 2016. View at Publisher · View at Google Scholar
  • Prashant Singh, Bharath Viswanath Ravi, and Srinath V. Ekkad, “Experimental and numerical study of heat transfer due to developing flow in a two-pass rib roughened square duct,” International Journal of Heat and Mass Transfer, vol. 102, pp. 1245–1256, 2016. View at Publisher · View at Google Scholar
  • Berrabah Brahim, and Aminallah Miloud, “Prediction of flow and heat transfer inside a two-pass rotating channel with angled ribbed surfaces,” Journal of Enhanced Heat Transfer, vol. 23, no. 2, pp. 109–136, 2016. View at Publisher · View at Google Scholar
  • Berrabah Brahim, “Numerical simulation of the effect of rib orientation on fluid flow and heat transfer in rotating serpentine passages,” Journal of Thermal Science and Engineering Applications, vol. 9, no. 1, 2017. View at Publisher · View at Google Scholar
  • Bharath Viswanath Ravi, Prashant Singh, and Srinath V. Ekkad, “Numerical investigation of turbulent flow and heat transfer in two-pass ribbed channels,” International Journal of Thermal Sciences, vol. 112, pp. 31–43, 2017. View at Publisher · View at Google Scholar
  • Berrabah Brahim, and Aminallah Miloud, “Numerical Simulation of the Effect of Channel Orientation on Fluid Flow and Heat Transfer at High Buoyancy Number in a Rotating Two-Pass Channel With Angled Ribs,” Journal of Heat Transfer, vol. 141, no. 2, pp. 022502, 2018. View at Publisher · View at Google Scholar