Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2006 (2006), Article ID 17079, 15 pages

Blade Tip Leakage Flow and Heat Transfer with Pressure-Side Winglet

1Turbine Innovation and Energy Research (TIER) Center, Louisiana State University, Baton Rouge, LA, USA
2Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, UP 208 016, India
3General Electric Global Research, Niskayuna, NY 12309, USA
4General Electric Aircraft Engines, Cincinnati, OH 45215, USA

Received 11 October 2005; Accepted 20 February 2006

Copyright © 2006 A. K. Saha et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

A. K. Saha, Sumanta Acharya, Ron Bunker, and Chander Prakash, “Blade Tip Leakage Flow and Heat Transfer with Pressure-Side Winglet,” International Journal of Rotating Machinery, vol. 2006, Article ID 17079, 15 pages, 2006. doi:10.1155/IJRM/2006/17079