Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2006, Article ID 71302, 13 pages
http://dx.doi.org/10.1155/IJRM/2006/71302

Numerical and Experimental Study of Friction Damping Blade Attachments of Rotating Bladed Disks

1Equipe Dynamique des Structures et des Syst\`{e}me, Laboratoire de Tribologie et de Dynamique des Syst\`{e}mes, UMR CNRS 5513, Ecole Centrale de Lyon, 36 avenue Guy de Collongue, Ecully Cedex 69134, France
2SNECMA, Site de Villaroche, Moissy Cramayel 77550, France

Received 16 January 2006; Revised 18 May 2006; Accepted 4 June 2006

Copyright © 2006 D. Charleux et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [67 citations]

The following is the list of published articles that have cited the current article.

  • Marco Allara, Stefano Zucca, and Muzio M. Gola, “Effect of Crowning of Dovetail Joints on Turbine Blade Root Damping,” Key Engineering Materials, vol. 347, pp. 317–322, 2007. View at Publisher · View at Google Scholar
  • Francisco J. Marquina, Armando Coro, Alberto Gutierrez, Roberto Alonso, David J. Ewins, and Giovanna Girini, “Friction damping modeling in high stress contact areas using microslip friction model,” Proceedings of the ASME Turbo Expo, vol. 5, pp. 309–318, 2008. View at Publisher · View at Google Scholar
  • Petrov, “Method for sensitivity analysis of resonance forced response of bladed discs with nonlinear contact interfaces,” Proceedings of the ASME Turbo Expo, vol. 5, pp. 355–366, 2008. View at Publisher · View at Google Scholar
  • Denis Laxalde, Loïc Salles, Laurent Blanc, and Fabrice Thouverez, “Non-linear modal analysis for bladed disks with friction contact interfaces,” Proceedings of the ASME Turbo Expo, vol. 5, pp. 457–467, 2008. View at Publisher · View at Google Scholar
  • Denis Laxalde, Claude Gibert, and Fabrice Thouverez, “Experimental and numerical investigations of friction rings damping of blisks,” Proceedings of the ASME Turbo Expo, vol. 5, pp. 469–479, 2008. View at Publisher · View at Google Scholar
  • Jean, Gibert, Dupont, and Lombard, “Test-model correlation of dry-friction damping phenomena in aero-engines,” Proceedings of the ASME Turbo Expo, vol. 5, pp. 481–491, 2008. View at Publisher · View at Google Scholar
  • Loïc Salles, Laurent Blanc, Fabrice Thouverez, and Alexander M. Gouskov, “Dynamic analysis of fretting-wear in friction contact interfaces,” Proceedings of the ASME Turbo Expo, vol. 5, pp. 543–554, 2008. View at Publisher · View at Google Scholar
  • Jonas Fischer, and Jens Strackeljan, “A nonlinear numerical simulation of a lab centrifuge with internal damping,” Nonlinear Dynamics, vol. 60, no. 1-2, pp. 39–47, 2009. View at Publisher · View at Google Scholar
  • Denis Laxalde, and Fabrice Thouverez, “Complex non-linear modal analysis for mechanical systems: Application to turbomachinery bladings with friction interfaces,” Journal of Sound and Vibration, vol. 322, no. 4-5, pp. 1009–1025, 2009. View at Publisher · View at Google Scholar
  • Kunio Asai, Shigeo Sakurai, Takeshi Kudo, Norihiko Ozawa, and Taizo Ikeda, “Evaluation of friction damping in dovetail root joints based on dissipation energy on contact surfaces,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 301–313, 2009. View at Publisher · View at Google Scholar
  • Roberto Alonso, Francisco J. Marquina, Armando Coro, and Alberto Gutiérrez, “Static normal stress influence in friction damping of blade attachments,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 343–351, 2009. View at Publisher · View at Google Scholar
  • Lubos Prchlik, Tomas Misek, Zdenek Kubin, and Karel Duchek, “The measurement of dynamic vibration modes and frequencies of a large LP bladed disc,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 447–453, 2009. View at Publisher · View at Google Scholar
  • Loïc Salles, Laurent Blanc, Fabrice Thouverez, Aleksander M. Gouskov, and Pierrick Jean, “Dynamic analysis of a bladed disk with friction and fretting-wear in blade attachments,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 465–476, 2009. View at Publisher · View at Google Scholar
  • E. P. Petrov, “Method for Sensitivity Analysis of Resonance Forced Response of Bladed Disks With Nonlinear Contact Interfaces,” Journal of Engineering for Gas Turbines and Power, vol. 131, no. 2, pp. 022510, 2009. View at Publisher · View at Google Scholar
  • Loi¨c Salles, Laurent Blanc, Fabrice Thouverez, and Alexander M. Gouskov, “Dynamic Analysis of Fretting-Wear in Friction Contact Interfaces,” Journal of Engineering for Gas Turbines and Power, vol. 132, no. 1, pp. 012503, 2010. View at Publisher · View at Google Scholar
  • Denis Laxalde, Fabrice Thouverez, and Jean-Pierre Lombard, “Forced Response Analysis of Integrally Bladed Disks With Friction Ring Dampers,” Journal of Vibration and Acoustics, vol. 132, no. 1, pp. 011013, 2010. View at Publisher · View at Google Scholar
  • Stefano Zucca, Christian M. Firrone, and Muzio Gola, “A method for the calculation of friction damping in blade root joints,” ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010, vol. 5, pp. 347–355, 2010. View at Publisher · View at Google Scholar
  • Coghlan, Green, and Baron, “Mechanical damping analysis of a vibrating labyrinth seal structure with frictional contact,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 949–957, 2010. View at Publisher · View at Google Scholar
  • Löic Salles, Alexander M. Gouskov, Laurent Blanc, Fabrice Thouverez, and Pierrick Jean, “Dynamic analysis of fretting-wear in joint interface by a multiscale harmonic balance method coupled with explicit or implicit integration schemes,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 1003–1013, 2010. View at Publisher · View at Google Scholar
  • Schwingshackl, Petrov, and Ewins, “Validation of test rig measurements and prediction tools for friction interface modelling,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 1015–1024, 2010. View at Publisher · View at Google Scholar
  • Petrov, “A high-accuracy model reduction for analysis of nonlinear vibrations in structures with contact interfaces,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 1025–1037, 2010. View at Publisher · View at Google Scholar
  • Claude Gibert, Vsevolod Kharyton, Fabrice Thouverez, and Pierrick Jean, “On forced response of a rotating integrally bladed disk: Predictions and experiments,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 1103–1116, 2010. View at Publisher · View at Google Scholar
  • Stefano Zucca, Christian M. Firrone, and Muzio M. Gola, “Numerical assessment of friction damping at turbine blade root joints by simultaneous calculation of the static and dynamic contact loads,” Nonlinear Dynamics, vol. 67, no. 3, pp. 1943–1955, 2011. View at Publisher · View at Google Scholar
  • L. Salles, L. Blanc, F. Thouverez, and A.M. Gouskov, “Dynamic analysis of fretting-wear in friction contact interfaces,” International Journal of Solids and Structures, vol. 48, no. 10, pp. 1513–1524, 2011. View at Publisher · View at Google Scholar
  • Schwingshackl, Petrov, and Ewins, “Effects of contact interface parameters on vibration of turbine bladed disks with underplatform dampers,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 867–876, 2011. View at Publisher · View at Google Scholar
  • Jie Hong, Lulu Chen, Yanhong Ma, and Dayi Zhang, “Dynamic characteristics of dry friction damping at bladed disk joints: Experiments,” Proceedings of the ASME Turbo Expo, vol. 6, pp. 887–896, 2011. View at Publisher · View at Google Scholar
  • E. P. Petrov, “A High-Accuracy Model Reduction for Analysis of Nonlinear Vibrations in Structures With Contact Interfaces,” Journal of Engineering for Gas Turbines and Power, vol. 133, no. 10, pp. 102503, 2011. View at Publisher · View at Google Scholar
  • C.W. Schwingshackl, E.P. Petrov, and D.J. Ewins, “Measured and estimated friction interface parameters in a nonlinear dynamic analysis,” Mechanical Systems and Signal Processing, vol. 28, pp. 574–584, 2012. View at Publisher · View at Google Scholar
  • C. W. Schwingshackl, “Modeling of Flange Joints for the Nonlinear Dynamic Analysis of Gas Turbine Engine Casings,” Journal of Engineering for Gas Turbines and Power, vol. 134, no. 12, pp. 122504, 2012. View at Publisher · View at Google Scholar
  • C. W. Schwingshackl, E. P. Petrov, and D. J. Ewins, “Effects of Contact Interface Parameters on Vibration of Turbine Bladed Disks With Underplatform Dampers,” Journal of Engineering for Gas Turbines and Power, vol. 134, no. 3, pp. 032507, 2012. View at Publisher · View at Google Scholar
  • Petrov, Zachariadis, Beretta, and Elliot, “A study of nonlinear vibrations in a frictionally-damped turbine bladed disc with comprehensive modelling of aerodynamic effects,” Proceedings of the ASME Turbo Expo, vol. 7, pp. 1239–1251, 2012. View at Publisher · View at Google Scholar
  • Schwingshackl, and Petrov, “Modelling of flange joints for the nonlinear dynamic analysis of gas turbine engine casings,” Proceedings of the ASME Turbo Expo, vol. 7, pp. 1283–1293, 2012. View at Publisher · View at Google Scholar
  • Patricio Almeida, Claude Gibert, Xavier Leblanc, Jean-Philippe Ousty, and Fabrice Thouverez, “Experimental and numerical investigations on a rotating centrifugal compressor,” Proceedings of the ASME Turbo Expo, vol. 7, pp. 1133–1142, 2012. View at Publisher · View at Google Scholar
  • Loveleen Kumar Bhagi, Vikas Rastogi, and Pardeep Gupta, “A brief review on modeling approaches of friction dampers used in turbomachinery,” Advances in Intelligent and Soft Computing, vol. 131, no. 2, pp. 317–329, 2012. View at Publisher · View at Google Scholar
  • Christoph W. Schwingshackl, “Measurement of friction contact parameters for nonlinear dynamic analysis,” Conference Proceedings of the Society for Experimental Mechanics Series, vol. 5, pp. 167–177, 2012. View at Publisher · View at Google Scholar
  • E. P. Petrov, “A Study of Nonlinear Vibrations in a Frictionally Damped Turbine Bladed Disk With Comprehensive Modeling of Aerodynamic Effects,” Journal of Engineering for Gas Turbines and Power, vol. 135, no. 3, pp. 032504, 2013. View at Publisher · View at Google Scholar
  • C. W. Schwingshackl, D. Di Maio, I. Sever, and J. S. Green, “Modeling and Validation of the Nonlinear Dynamic Behavior of Bolted Flange Joints,” Journal of Engineering for Gas Turbines and Power-Transactions of The Asme, vol. 135, no. 12, 2013. View at Publisher · View at Google Scholar
  • Ruffini, Schwingshackl, and Green, “LDV measurement of local nonlinear contact conditions of flange joint,” Conference Proceedings of the Society for Experimental Mechanics Series, vol. 1, pp. 159–168, 2013. View at Publisher · View at Google Scholar
  • Schwingshackl, Di Maio, and Green, “Modelling and validation of the nonlinear dynamic behaviour of bolted flange joints,” Proceedings of the ASME Turbo Expo, vol. 7, 2013. View at Publisher · View at Google Scholar
  • Petrov, “Analysis of nonlinear vibrations upon wear-induced loss of friction dampers in tuned and mistuned bladed discs,” Proceedings of the ASME Turbo Expo, vol. 7, 2013. View at Publisher · View at Google Scholar
  • Malte Krack, Sebastian Tatzko, Lars Panning-von Scheidt, and Jörg Wallaschek, “Reliability optimization of friction-damped systems using nonlinear modes,” Journal of Sound and Vibration, 2014. View at Publisher · View at Google Scholar
  • Anna Herzog, Malte Krack, Lars Panning Von Scheidt, and Jörg Wallaschek, “Comparison of two widely-used frequency-time domain contact models for the vibration simulation of shrouded turbine blades,” Proceedings of the ASME Turbo Expo, vol. 7B, 2014. View at Publisher · View at Google Scholar
  • M. Claeys, J-J. Sinou, J-P. Lambelin, and R. Todeschini, “Experiments and numerical simulations of nonlinear vibration responses of an assembly with friction joints – Application on a test structure named “Harmony”,” Mechanical Systems and Signal Processing, 2015. View at Publisher · View at Google Scholar
  • Joannin, Chouvion, Thouverez, Mbaye, and Ousty, “Nonlinear modal analysis of mistuned periodic structures subjected to dry friction,” Proceedings of the ASME Turbo Expo, vol. 7B, 2015. View at Publisher · View at Google Scholar
  • Caetano Peng, Tomokazu Miyakozawa, Thomas Schroeter, Jan Schnitzler, and Ian Lyndon, “Non-linear vibration behaviour of an axial compressor rotor blade,” Proceedings of the ASME Turbo Expo, vol. 7B, 2015. View at Publisher · View at Google Scholar
  • Malte Krack, Loic Salles, and Fabrice Thouverez, “Vibration Prediction of Bladed Disks Coupled by Friction Joints,” Archives of Computational Methods in Engineering, 2016. View at Publisher · View at Google Scholar
  • Joannin, Chouvion, Thouverez, Mbaye, and Ousty, “Nonlinear Modal Analysis of Mistuned Periodic Structures Subjected to Dry Friction,” Journal of Engineering for Gas Turbines and Power, vol. 138, no. 7, 2016. View at Publisher · View at Google Scholar
  • Chiara Gastaldi, and Muzio M. Gola, “On the relevance of a microslip contact model for under-platform dampers,” International Journal of Mechanical Sciences, 2016. View at Publisher · View at Google Scholar
  • Lin Li, Jiu-Zhou Liu, and Chao Li, “Review of the dry friction dampers in aero-engine and their design technologies,” Hangkong Dongli Xuebao/Journal of Aerospace Power, vol. 31, no. 10, pp. 2305–2317, 2016. View at Publisher · View at Google Scholar
  • Asmi Rizvi, Chris W. Smith, Ramesh Rajasekaran, and Ken E. Evans, “Dynamics of dry friction damping in gas turbines: Literature survey,” JVC/Journal of Vibration and Control, vol. 22, no. 1, pp. 296–305, 2016. View at Publisher · View at Google Scholar
  • Schwingshackl, and Natoli, “Explicit modelling of microslip behaviour in dry friction contact,” Conference Proceedings of the Society for Experimental Mechanics Series, vol. 4, pp. 265–272, 2016. View at Publisher · View at Google Scholar
  • Chiara Gastaldi, and Muzio M. Gola, “Estimation accuracy vs. engineering significance of contact parameters for solid dampers,” Journal of the Global Power and Propulsion Society, vol. 1, pp. VLXC9F, 2017. View at Publisher · View at Google Scholar
  • Chiara Gastaldi, Emanuele Grossi, and Teresa M. Berruti, “On the choice of contact parameters for the forced response calculation of a bladed disk with underplatform dampers,” Journal of the Global Power and Propulsion Society, vol. 1, pp. 5D19RH, 2017. View at Publisher · View at Google Scholar
  • Chaoping Zang, Junjie Chen, Biao Zhou, and Petrov, “Analysis of micro-slip properties for models of bladed disc friction joints,” Proceedings of the ASME Turbo Expo, vol. 7, 2017. View at Publisher · View at Google Scholar
  • Junjie Chen, Chaoping Zang, Biao Zhou, and Ep Petrov, “A study of friction microslip modeling for dynamic analysis of bladed discs with root joints,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, pp. 095440621879202, 2018. View at Publisher · View at Google Scholar
  • Colas Joannin, Fabrice Thouverez, and Benjamin Chouvion, “Reduced-order modelling using nonlinear modes and triple nonlinear modal synthesis,” Computers & Structures, vol. 203, pp. 18–33, 2018. View at Publisher · View at Google Scholar
  • Armand, Salles, Willner, Süß, and Schwingshackl, “On the effects of roughness on the nonlinear dynamics of a bolted joint: A multiscale analysis,” European Journal of Mechanics, A/Solids, vol. 70, pp. 44–57, 2018. View at Publisher · View at Google Scholar
  • Haitao Liao, Wenwang Wu, and Daining Fang, “The reduced space Sequential Quadratic Programming (SQP) method for calculating the worst resonance response of nonlinear systems,” Journal of Sound and Vibration, vol. 425, pp. 301–323, 2018. View at Publisher · View at Google Scholar
  • Antoine Mabilia, Claude Gibert, Fabrice Thouverez, and Edouard De Jaeghere, “Nonlinear Forced Response of a Composite Fan Blade Actuated by Piezoelectric Patches: Simulation and Testing,” Nonlinear Dynamics, Volume 1, pp. 351–362, 2018. View at Publisher · View at Google Scholar
  • Fahimeh Mashayekhi, Stefano Zucca, and Ali Salehzadeh Nobari, “A Comparison of Two Reduction Techniques for Forced Response of Shrouded Blades with Contact Interfaces,” Dynamics of Coupled Structures, Volume 4, pp. 79–88, 2018. View at Publisher · View at Google Scholar
  • B. Chouvion, “Vibration analysis of beam structures with localized nonlinearities by a wave approach,” Journal of Sound and Vibration, 2018. View at Publisher · View at Google Scholar
  • Andreas Hartung, Hans-Peter Hackenberg, Malte Krack, Johann Gross, Torsten Heinze, and Lars Panning-von Scheidt, “Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgL,” Journal of Engineering for Gas Turbines and Power, vol. 141, no. 2, pp. 021019, 2018. View at Publisher · View at Google Scholar
  • Mohammad Afzal, Ines Lopez Arteaga, and Leif Kari, “Numerical analysis of multiple friction contacts in bladed disks,” International Journal of Mechanical Sciences, 2018. View at Publisher · View at Google Scholar
  • Andreas Hartung, Hans-Peter Hackenberg, Lars Panning-von Scheidt, Johann Gross, Torsten Heinze, and Malte Krack, “Rig and engine validation of the non-linear forced response analysis performed by the tool Oragl,” Proceedings of the ASME Turbo Expo, vol. 7C, 2018. View at Publisher · View at Google Scholar
  • Junjie Chen, Chaoping Zang, Biao Zhou, and Petrov, “Analysis of nonlinear modal damping due to friction at blade roots using high-fidelity modelling,” Proceedings of the ASME Turbo Expo, vol. 7C, 2018. View at Publisher · View at Google Scholar
  • Tianyuan Liu, Di Zhang, and Yonghui Xie, “A Nonlinear vibration analysis of forced response for a bladed-disk with dry friction dampers,” Journal of Low Frequency Noise, Vibration and Active Control, pp. 146134841983475, 2019. View at Publisher · View at Google Scholar
  • Antoine Mabilia, Claude Gibert, Fabrice Thouverez, Edouard De Jaeghere, Lionel Sanchez, and Laura Giovannoni, “Modal Testing of a Full-Scale Rotating Woven Composite Fan Using Piezoelectric Excitation,” Mechanisms and Machine Science, vol. 62, pp. 291–305, 2019. View at Publisher · View at Google Scholar