Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2006, Article ID 71302, 13 pages
http://dx.doi.org/10.1155/IJRM/2006/71302

Numerical and Experimental Study of Friction Damping Blade Attachments of Rotating Bladed Disks

1Equipe Dynamique des Structures et des Syst\`{e}me, Laboratoire de Tribologie et de Dynamique des Syst\`{e}mes, UMR CNRS 5513, Ecole Centrale de Lyon, 36 avenue Guy de Collongue, Ecully Cedex 69134, France
2SNECMA, Site de Villaroche, Moissy Cramayel 77550, France

Received 16 January 2006; Revised 18 May 2006; Accepted 4 June 2006

Copyright © 2006 D. Charleux et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. V. Srinivasan, “Flutter and resonant vibration characteristics of engine blades,” ASME Journal of Engineering for Gas Turbines and Power, vol. 119, no. 4, pp. 742–775, 1997. View at Google Scholar
  2. E. Seinturier, J.-P. Lombard, M. Dumas, C. Dupont, V. Sharma, and J. Dupeux, “Forced response prediction methodology for the design of HP compressors bladed disks,” in Proceedings of the ASME Turbo Expo 2004, vol. 6, pp. 317–326, Vienna, Austria, June 2004, paper no. GT-2004-53372.
  3. M. Berthillier, M. Dhainaut, F. Burgaud, and V. Garnier, “A numerical method for the prediction of bladed disk forced response,” ASME Journal of Engineering for Gas Turbines and Power, vol. 119, no. 2, pp. 404–410, 1997. View at Google Scholar
  4. I. G. Tokar', A. P. Zinkovskii, and V. V. Matveev, “On the problem of improvement of the damping ability of rotor blades of contemporary gas-turbines engines,” Strength of Materials, vol. 35, no. 4, pp. 368–375, 2003. View at Google Scholar
  5. J. H. Griffin, “Friction damping of resonant stresses in gas turbine engine airfoils,” ASME Journal of Engineering for Power, vol. 102, no. 2, pp. 329–333, 1980. View at Google Scholar
  6. M. Berthillier, C. Dupont, R. Mondal, and J. J. Barrau, “Blades forced response analysis with friction dampers,” ASME Journal of Vibration and Acoustics, vol. 120, no. 2, pp. 468–474, 1998. View at Google Scholar
  7. E. P. Petrov and D. J. Ewins, “Analytical formulation of friction interface elements for analysis of nonlinear multi-harmonic vibrations of bladed disks,” ASME Journal of Turbomachinery, vol. 125, no. 2, pp. 364–371, 2003. View at Publisher · View at Google Scholar
  8. O. Poudou and C. Pierre, “Hybrid frequency-time domain methods for the analysis of complex structural systems with dry friction damping,” in Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, vol. 1, pp. 111–124, Norfolk, Va, USA, April 2003.
  9. S. Nacivet, C. Pierre, F. Thouverez, and L. Jezequel, “A dynamic Lagrangian frequency-time method for the vibration of dry-friction-damped systems,” Journal of Sound and Vibration, vol. 265, no. 1, pp. 201–219, 2003. View at Publisher · View at Google Scholar
  10. J. S. Rao, M. A. W. Usmani, and C. V. Ramakrishnan, “Interface damping in blade attachment region,” in Proceedings of the 3rd International Conference on Rotor Dynamics, pp. 185–190, Lyon, France, September 1990.
  11. J. J. Kielb and R. S. Abhari, “Experimental study of aerodynamic and structural damping in a full-scale rotating turbine,” ASME Journal of Engineering for Gas Turbines and Power, vol. 125, no. 1, pp. 102–112, 2003. View at Publisher · View at Google Scholar
  12. G. B. Sinclair, N. G. Cormier, J. H. Griffin, and G. Meda, “Contact stresses in dovetail attachments: finite element modeling,” ASME Journal of Engineering for Gas Turbines and Power, vol. 124, no. 1, pp. 182–189, 2002. View at Publisher · View at Google Scholar
  13. J. R. Beisheim and G. B. Sinclair, “On the three-dimensional finite element analysis of dovetail attachments,” ASME Journal of Turbomachinery, vol. 125, no. 2, pp. 372–379, 2003. View at Publisher · View at Google Scholar
  14. C.-H. Menq, J. Bielak, and J. H. Griffin, “The influence of microslip on vibratory response, part I: a new microslip model,” Journal of Sound and Vibration, vol. 107, no. 2, pp. 279–293, 1986. View at Google Scholar
  15. K. Y. Sanliturk, M. Imregun, and D. J. Ewins, “Harmonic balance vibration analysis of turbine blades with friction dampers,” ASME Journal of Vibration and Acoustics, vol. 119, no. 1, pp. 96–103, 1997. View at Google Scholar
  16. D. Charleux, F. Thouverez, and J. P. Lombard, “Three-dimensional multiharmonic analysis of contact and friction in dovetail joints,” in Proceedings of the 22nd International Modal Analysis Conference, Dearborn, Mich, USA, January 2004, CD-ROM, paper 348.
  17. E. P. Petrov and D. J. Ewins, “Analysis of essentially non-linear vibration of large-scale models for bladed discs with variable contact and friction at root joints,” in Proceedings of the 8th International Conference on Vibrations in Rotating Machinery, pp. 163–172, Swansea, UK, September 2004.
  18. R. R. Craig and M. C. C. Bampton, “Coupling of substructures for dynamic analysis,” AIAA Journal, vol. 6, no. 7, pp. 1313–1319, 1968. View at Google Scholar
  19. B. Jemai, Contrôle actif de structures flexibles à l'aide de matériaux piezo-electriques: applications, M.S. thesis, Ecole Centrale de Lyon, Ecully Cedex, France, 1999.
  20. E. Rabinowicz, Friction and Wear of Materials, John Wiley & Sons, New York, NY, USA, 1965, chapter 4.
  21. R. A. Ibrahim, “Friction-induced vibration, chatter, squeal, and chaos. Part I: mechanics of contact and friction,” ASME Applied Mechanics Reviews, vol. 47, no. 7, pp. 209–226, 1994. View at Google Scholar
  22. L. E. Seitzman, R. N. Bolster, and I. L. Singer, “IBAD MOS2 lubrication of titanium alloys,” Surface and Coatings Technology, vol. 78, no. 1–3, pp. 10–13, 1996. View at Google Scholar
  23. J. F. Ferrero, E. Yettou, J. J. Barrau, and S. Rivallant, “Analysis of a dry friction problem under small displacements: application to a bolted joint,” Wear, vol. 256, no. 11-12, pp. 1135–1143, 2004. View at Publisher · View at Google Scholar
  24. J. Crassous, S. Ciliberto, E. Charlaix, and C. Laroche, “Hysteresis and recovery length in a dry solid friction experiment,” Journal de Physique II, vol. 7, no. 12, pp. 1745–1751, 1997. View at Google Scholar
  25. C. B. Smith and N. M. Wereley, “Transient analysis for damping identification in rotating composite beams with integral damping layers,” Smart Materials and Structures, vol. 5, no. 5, pp. 540–550, 1996. View at Google Scholar