Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2007, Article ID 56808, 15 pages
http://dx.doi.org/10.1155/2007/56808
Research Article

Active Suppression of Rotating Stall Inception with Distributed Jet Actuation

Département de génie mécanique, École Polytechnique de Montréal, Campus Université de Montréal, 2900 boulevard Édouard-Montpetit, 2500 chemin de Polytechnique, bureau C318.9, Montréal, Québec H3T 1J4, Canada

Received 19 October 2006; Accepted 5 March 2007

Academic Editor: Meinhard T. Schobeiri

Copyright © 2007 Huu Duc Vo. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. J. Day, “Stall inception in axial flow compressors,” Journal of Turbomachinery, vol. 115, no. 1, pp. 1–9, 1993. View at Google Scholar
  2. C. Nie, G. Xu, X. Cheng, and J. Chen, “Micro air injection and its unsteady response in a low-speed axial compressor,” Journal of Turbomachinery, vol. 124, no. 4, pp. 572–579, 2002. View at Publisher · View at Google Scholar
  3. H. D. Vo, C. S. Tan, and E. M. Greitzer, “Criteria for spike initiated rotating stall,” in Proceedings of the ASME Turbo Expo—Gas Turbie Technology: Focus for the Future, pp. 155–165, Reno-Tahoe, Nev, USA, June 2005, ASME Paper GT2005-68374.
  4. F. K. Moore, “Theory of rotating stall of multistage axial compressors—part I: small disturbances—part II: finite disturbances—part III: limit cycles,” Journal of Engineering for Gas Turbines and Power, vol. 106, no. 2, pp. 313–336, 1984. View at Google Scholar
  5. F. K. Moore and E. M. Greitzer, “Theory of post-stall transients in axial compression systems—part I: development of equations,” Journal of Engineering for Gas Turbines and Power, vol. 108, no. 1, pp. 68–76, 1986. View at Google Scholar
  6. J. D. Paduano, A. H. Epstein, L. Valavani, J. P. Longley, E. M. Greitzer, and G. R. Guenette, “Active control of rotating stall in a low-speed axial compressor,” Journal of Turbomachinery, vol. 115, no. 1, pp. 48–56, 1993. View at Google Scholar
  7. J. M. Haynes, G. J. Hendricks, and A. H. Epstein, “Active stabilization of rotating stall in a three-stage axial compressor,” Journal of Turbomachinery, vol. 116, no. 2, pp. 226–239, 1994. View at Google Scholar
  8. C. M. Van Schalkwyk, J. D. Paduano, E. M. Greitzer, and A. H. Epstein, “Active stabilization of axial compressors with circumferential inlet distortion,” Journal of Turbomachinery, vol. 120, no. 3, pp. 431–439, 1998. View at Google Scholar
  9. G. J. Hendricks and D. L. Gysling, “Theoretical study of sensor-actuator schemes for rotating stall control,” Journal of Propulsion and Power, vol. 10, no. 1, pp. 101–109, 1994. View at Google Scholar
  10. D. L. Gysling and E. M. Greitzer, “Dynamic control of rotating stall in axial flow compressors using aeromechanical feedback,” Journal of Turbomachinery, vol. 117, no. 3, pp. 307–319, 1995. View at Google Scholar
  11. H. J. Weigl, J. D. Paduano, L. G. Fréchette et al., “Active stabilization of rotating stall and surge in a transonic single-stage axial compressor,” Journal of Turbomachinery, vol. 120, no. 4, pp. 625–636, 1998. View at Google Scholar
  12. K. L. Suder, M. D. Hathaway, S. A. Thorp, A. J. Strazisar, and M. B. Bright, “Compressor stability enhancement using discrete tip injection,” Journal of Turbomachinery, vol. 123, no. 1, pp. 14–23, 2001. View at Publisher · View at Google Scholar
  13. R. D'Andrea, R. L. Behnken, and R. M. Murray, “Rotating stall control of an axial flow compressor using pulsed air injection,” Journal of Turbomachinery, vol. 119, no. 4, pp. 742–752, 1997. View at Google Scholar
  14. S. Yeung, Y. Wang, and R. M. Murray, “Bleed valve rate requirements evaluation in rotating stall control on axial compressors,” Journal of Propulsion and Power, vol. 16, no. 5, pp. 781–791, 2000. View at Google Scholar
  15. Z. S. Spakovszky, J. D. Paduano, R. Larsonneur, A. Traxler, and M. M. Bright, “Tip clearance actuation with magnetic bearings for high-speed compressor stall control,” Journal of Turbomachinery, vol. 123, no. 3, pp. 464–472, 2001. View at Publisher · View at Google Scholar
  16. M. T. Schobeiri and M. Attia, “Active control of compressor instability and surge by stator blades adjustment,” Journal of Propulsion and Power, vol. 19, no. 2, pp. 312–317, 2003. View at Google Scholar
  17. L. G. Fréchette, O. G. McGee, and M. B. Graf, “Tailored structural design and aeromechanical control of axial compressor stall—part II: evaluation of approaches,” Journal of Turbomachinery, vol. 126, no. 1, pp. 63–72, 2004. View at Publisher · View at Google Scholar
  18. H. D. Vo and J. D. Paduano, “Experimental development of a jet injection model for rotating stall control,” in Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, p. 11, Stockholm, Sweden, June 1998, ASME Paper 98-GT-308.
  19. D. S. Diaz, Design of a jet actuator for active control of rotating stall, S.M. thesis.
  20. A. H. J. Eastland, “Investigation of compressor performance in rotating stall,” MIT GTL Report 164, MIT, Cambridge, Mass, USA, 1982. View at Google Scholar
  21. R. N. Gamache and E. M. Greitzer, “Reverse flow in multistage axial compressors,” Journal of Propulsion and Power, vol. 6, no. 4, pp. 461–473, 1990. View at Google Scholar
  22. V. H. Garnier, A. H. Epstein, and E. M. Greitzer, “Rotating waves as a stall inception indication in axial compressors,” Journal of Turbomachinery, vol. 113, no. 2, pp. 290–302, 1991. View at Google Scholar
  23. J. D. Paduano, “Active control of rotating stall in axial compressors,” MIT GTL Report 208, MIT, Cambridge, Mass, USA, 1992. View at Google Scholar
  24. J. M. Haynes, “Active control of rotating stall in a three-stage axial compressor,” MIT GTL Report 218, MIT, Cambridge, Mass, USA, 1993. View at Google Scholar