Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2008, Article ID 175956, 13 pages
http://dx.doi.org/10.1155/2008/175956
Research Article

Possibilities of Simultaneous In-Cylinder Reduction of Soot and Emissions for Diesel Engines with Direct Injection

Institute of Reciprocating Engines, University of Karlsruhe (TH), Kaiserstraße 12, 76870 Karlsruhe, Germany

Received 7 April 2008; Accepted 26 June 2008

Academic Editor: Toshinori Watanabe

Copyright © 2008 U. Wagner et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Stiesch and G. P. Merker, Technische Verbrennung, Motorische Verbrennung, B. G. Teubner, Stuttgart, Germany, 1999.
  2. J. Schlütter, “Saubere Luft macht Forschern Sorge,” Internetartikel des Spiegel-Magazins, 2005. View at Google Scholar
  3. H. Bockhorn, Soot Formation in Combustion: Mechanisms and Models, Springer Series in Chemical Physics, Springer, Heidelberg, Germany, 1994.
  4. M. Badami, F. Millo, F. Mallamo, and E. E. Rossi, “Influence of multiple injection strategies on emissions, combustion noise and BSFC of a DI common-rail diesel engine,” SAE paper 2002-01-0503, 2002.
  5. H. Kubach, Ionenstrom als Sensorsignal der dieselmotorischen Verbrennung, dissertation, Logos, Universität Karlsruhe (TH), Berlin, Germany, 2004.
  6. A. Velji, “Stand der Technik: Rußbildung und –oxidation,” in Proceedings of the FVV Workshop Ruß- und Schadstoffentstehung sowie Abgaskatalyse in Modernen Verbrennungsmotoren, Frankfurt, Germany, 2005.
  7. M. Houben and G. Lepperhoff, “Soot formation in local zones of fuel/burned gas-mixture in diesel engines,” in Proceedings of the 19th International Congress on Combustion Engines, Florence, Italy, 1991.
  8. K. Mayer, Pyrometrische Untersuchung der Verbrennung in Motoren mit Common-Rail-Direkteinspritzung mittels einer erweiterten Zwei-Farben-Methode, dissertation, Logos, Universität Karlsruhe (TH), Berlin, Germany, 2000.
  9. M. Hopp, Untersuchung der Rußoxidation unter dieselmotorischen Randbedingungen, dissertation, Rheinisch-Westfälischen Technischen Hochschule (RWTH), Aachen, Germany, 2001.
  10. E. Müller, T. Raatz, and A. Groenendijk, “Homogene dieselverbrennung - die Lösung des NOx-partikel-problems?” in Proceedings of the 4th Dresdner Motorenkolloquium, Dresden, Germany, May-June 2001.
  11. H. Böhm, C. Feldermann, T. Heidermann, H. Jander, B. Lüers, and H. G. Wagner, “Measurements about the influence of pressure and temperature in premixed flames,” in Proceedings of the 22nd International Symposium on Combustion, Philadelphia, Pa, USA, August 1988.
  12. J. Hansen, Untersuchung der Verbrennung und Rußbildung in einem Wirbelkammer-Dieselmotor mit Hilfe eines schnellen Gasentnahmeventils, dissertation, Rheinisch-Westfälischen Technischen Hochschule (RWTH), Aachen, Germany, 1989.
  13. K. Akihama, Y. Takatori, K. Inagaki, S. Sasaki, and A. M. Dean, “Mechanism of the smokeless rich diesel combustion by reducing temperature,” SAE paper 2001-01-0655, 2001.
  14. A. Velji, W. Remmels, and R.-M. Schmidt, “Water to reduce NOx-emissions in diesel engines a basic study,” in Proceedings of the 21th CIMAC Congress on Combustion Engine Technology, Interlaken, Switzerland, April 1995, paper no. 46.
  15. I. Ahmad and S. R. Gollahalli, “Combustion of microemulsion sprays,” Journal of Propulsion and Power, vol. 10, no. 5, pp. 744–745, 1994. View at Google Scholar
  16. K. Lombaert, L. Le Moyne, P. Guibert, J. Tardieu de Maleissye, and J. Amouroux, “Benefits of water-fuel emulsion on automotive diesel exhaust emissions,” in Proceedings of the THIESEL Conference on Thermo-and Fluid-Dynamic Processes in Diesel Engines, Valencia, Spain, September 2002.
  17. A. C. Matheaus, T. W. Ryan, D. Daly, D. Langer, and M. P. B. Musculus, “Effects of puri NOx water-diesel fuel emulsions on emissions and fuel economy in a heavy-duty diesel engine,” SAE Transactions, vol. 111, no. 3, pp. 2725–2735, 2002. View at Google Scholar
  18. M. Kjemtrup and A. Aabo, “Latest on emission control, water emulsion and exhaust gas recirculation,” in Proceedings of the 24th World CIMAC Congress on Combustion Engine Technology, Kyoto, Japan, June 2004, paper no. 126.
  19. M. P. B. Musculus, J. E. Dec, D. R. Tree et al., “Effects of water-fuel emulsions on spray and combustion processes in a heavy-duty DI diesel engine,” SAE Transactions, vol. 111, no. 3, pp. 2736–2756, 2002. View at Google Scholar
  20. F. L. Dryer, “Water addition to practical combustion systems: concepts and applications,” in Proceedings of the 16th International Symposium on Combustion, pp. 279–295, The Combustion Institute, Pittsburgh, Pa, USA, 1976.
  21. J. C. Lasheras, A. C. Fernandez-Pello, and F. L. Dryer, “Initial observations on the free droplet combustion characteristics of water-in-fuel emulsions,” Combustion Science and Technology, vol. 21, no. 1-2, pp. 1–14, 1979. View at Google Scholar
  22. P. Eckert, A. Velji, and U. Spicher, “Numerical investigations of fuel-water emulsion combustion in DI-diesel engines,” in Proceedings of the 25th CIMAC Congress on Combustion Engine Technology, Vienna, Austria, May 2007.
  23. A. A. Amsden, “A block-structured KIVA program for engines with vertical or canted valves,” Tech. Rep. LA-13313-MS, Los Alamos National Laboratory, Los Alamos, NM, USA, 1997. View at Google Scholar
  24. D. L. Siebers and B. S. Higgins, “Flame lift-off on direct-injection diesel sprays under quiescent conditions,” in Proceedings of the SAE World Congress, Detroit, Mich, USA, March 2001, SAE Paper 2001-01-0530.