Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2008, Article ID 752062, 10 pages
http://dx.doi.org/10.1155/2008/752062
Research Article

Free Vibration Analysis of a Rotating Composite Shaft Using the 𝑝 -Version of the Finite Element Method

Department of Mechanical Engineering, Faculty of Sciences Engineering, Abou Bakr Belkaid University, Tlemcen 13000, Algeria

Received 19 November 2007; Accepted 24 May 2008

Academic Editor: Agnes Muszynska

Copyright © 2008 A. Boukhalfa et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Zinberg and M. F. Symonds, “The development of an advanced composite tail rotor driveshaft,” in Proceedings of the 26th Annual Forum of the American Helicopter Society, Washington, DC, USA, June 1970.
  2. H. L. M. dos Reis, R. B. Goldman, and P. H. Verstrate, “Thin-walled laminated composite cylindrical tubes—part III: critical speed analysis,” Journal of Composites Technology and Research, vol. 9, no. 2, pp. 58–62, 1987. View at Google Scholar
  3. K. Gupta and S. E. Singh, “Dynamics of composite rotors,” in Proceedings of the Indo-US Symposium on Emerging Trends in Vibration and Noise Engineering, pp. 59–70, New Delhi, India, March 1996.
  4. C. D. Kim and C. W. Bert, “Critical speed analysis of laminated composite, hollow drive shafts,” Composites Engineering, vol. 3, pp. 633–643, 1993. View at Google Scholar
  5. C. W. Bert and C. D. Kim, “Dynamic instability of composite-material drive shaft subjected to fluctuating torque and/or rotational speed,” Dynamics and Stability of Systems, vol. 10, no. 2, pp. 125–147, 1995. View at Google Scholar
  6. M.-Y. Chang, J.-K. Chen, and C.-Y. Chang, “A simple spinning laminated composite shaft model,” International Journal of Solids and Structures, vol. 41, no. 3-4, pp. 637–662, 2004. View at Publisher · View at Google Scholar
  7. C.-Y. Chang, M.-Y. Chang, and J. H. Huang, “Vibration analysis of rotating composite shafts containing randomly oriented reinforcements,” Composite Structures, vol. 63, no. 1, pp. 21–32, 2004. View at Publisher · View at Google Scholar
  8. S. P. Singh, Some studies on dynamics of composite shafts, Ph.D. thesis, Mechanical Engineering Department, IIT, Delhi, India, 1992.
  9. S. P. Singh and K. Gupta, “Dynamic analysis of composite rotors,” in Proceedings of the 5th International Symposium on Rotating Machinery (ISROMAC '94), pp. 204–219, Kaanapali, Hawaii, USA, May 1994.
  10. S. P. Singh and K. Gupta, “Dynamic analysis of composite rotors,” International Journal of Rotating Machinery, vol. 2, no. 3, pp. 179–186, 1996. View at Publisher · View at Google Scholar
  11. S. E. Singh and K. Gupta, “Experimental studies on composite shafts,” in Proceedings of the International Conference on Advances in Mechanical Engineering, pp. 1205–1221, Bangalore, India, December 1995.
  12. S. P. Singh and K. Gupta, “Composite shaft rotordynamic analysis using a layerwise theory,” Journal of Sound and Vibration, vol. 191, no. 5, pp. 739–756, 1996. View at Publisher · View at Google Scholar
  13. I. Babuska, B. A. Szabó, and I. N. Katz, “The p-version of the finite element method,” SIAM Journal on Numerical Analysis, vol. 18, no. 3, pp. 515–545, 1981. View at Publisher · View at Google Scholar
  14. B. A. Szabó and G. J. Sahrmann, “Hierarchic plate and shell models based on p-extension,” International Journal for Numerical Methods in Engineering, vol. 26, no. 8, pp. 1855–1881, 1988. View at Publisher · View at Google Scholar
  15. B. A. Szabó and I. Babuska, Finite Element Analysis, John Wiley & Sons, New York, NY, USA, 1991.
  16. L. Meirovitch and H. Baruh, “On the inclusion principle for the hierarchical finite element method,” International Journal for Numerical Methods in Engineering, vol. 19, no. 2, pp. 281–291, 1983. View at Publisher · View at Google Scholar
  17. D. C. Zhu, “Development of hierarchical finite element method at BIAA,” in Proceedings of the International Conference on Computational Mechanics, pp. 123–128, Tokyo, Japan, May 1986.
  18. N. S. Bardell, “The application of symbolic computing to the hierarchical finite element method,” International Journal for Numerical Methods in Engineering, vol. 28, no. 5, pp. 1181–1204, 1989. View at Publisher · View at Google Scholar · View at MathSciNet
  19. A. Côté and F. Charron, “On the selection of p-version shape functions for plate vibration problems,” Computers & Structures, vol. 79, no. 1, pp. 119–130, 2001. View at Publisher · View at Google Scholar
  20. A. Houmat, “A sector fourier p-element applied to free vibration analysis of sectorial plates,” Journal of Sound and Vibration, vol. 243, no. 2, pp. 269–282, 2001. View at Publisher · View at Google Scholar
  21. S. M. Hamza Cherif, “Free vibration analysis of rotating flexible beams by using the fourier p- version of the finite element,” International Journal of Computational Methods, vol. 2, no. 2, pp. 255–269, 2005. View at Publisher · View at Google Scholar
  22. C. W. Bert and C.-D. Kim, “Whirling of composite-material driveshafts including bending-twisting coupling and transverse shear deformation,” Journal of Vibration and Acoustics, vol. 117, no. 1, pp. 17–21, 1995. View at Publisher · View at Google Scholar
  23. C. W. Bert, “The effect of bending-twisting coupling on the critical speed of a driveshafts,” in Proceedings of the 6th Japan-US Conference on Composites Materials, pp. 29–36, Technomic, Orlando, Fla, USA, June 1992.