Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2011, Article ID 516128, 13 pages
http://dx.doi.org/10.1155/2011/516128
Research Article

Blade by Blade Tip Clearance Measurement

Flakt Woods Limited, Axial Way, Colchester, Essex, CO4 5ZD, UK

Received 31 December 2010; Accepted 20 June 2011

Academic Editor: Meinhard Taher Schobeiri

Copyright © 2011 A. G. Sheard. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [19 citations]

The following is the list of published articles that have cited the current article.

  • J.M. Gil-Garcia, I. Garcia, J. Zubia, and G. Aranguren, “Blade tip clearance and time of arrival immediate measurement method using an optic probe,” 2015 IEEE Metrology for Aerospace (MetroAeroSpace), pp. 118–122, . View at Publisher · View at Google Scholar
  • Tommaso Addabbo, Ada Fort, Marco Mugnaini, Valerio Vignoli, Stefano Cioncolini, and Marco Marrazzo, “A system for the dynamic response characterization of turbomachinery tip clearance measurement instruments based on capacitive probes,” 2015 IEEE Sensors Applications Symposium (SAS), pp. 1–5, . View at Publisher · View at Google Scholar
  • Loc Q. Duong, Nagamany Thayalakhandan, and Charlene X. Hu, “Radial inflow turbine: Synchronous vibration failure,” Proceedings of the ASME Turbo Expo, vol. 7, 2013. View at Publisher · View at Google Scholar
  • Jiuli Huang, Yanling Wang, and Qun Bao, “Firm Productivity And Sales Destinations: Evidence From Within China,” Economic Inquiry, vol. 53, no. 1, pp. 205–219, 2014. View at Publisher · View at Google Scholar
  • Ahmed M. Abdelrhman, Lim Meng Hee, M. S. Leong, and Salah Al-Obaidi, “Condition Monitoring of Blade in Turbomachinery: A Review,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Iker García, Joseba Zubia, Gaizka Durana, Gotzon Aldabaldetreku, María Asunción Illarramendi, and Joel Villatoro, “Optical fiber sensors for aircraft structural health monitoring,” Sensors (Switzerland), vol. 15, no. 7, pp. 15494–15519, 2015. View at Publisher · View at Google Scholar
  • Reid A. Berdanier, and Nicole L. Key, “Experimental Investigation of Factors Influencing Operating Rotor Tip Clearance in Multistage Compressors,” International Journal of Rotating Machinery, vol. 2015, pp. 1–13, 2015. View at Publisher · View at Google Scholar
  • Iker García, Radosław Przysowa, Josu Amorebieta, and Joseba Zubia, “Tip-Clearance Measurement in the First Stage of the Compressor of an Aircraft Engine,” Sensors, vol. 16, no. 11, pp. 1897, 2016. View at Publisher · View at Google Scholar
  • S. Lavagnoli, C. De Maesschalck, and V. Andreoli, “Design Considerations for Tip Clearance Control and Measurement on a Turbine Rainbow Rotor With Multiple Blade Tip Geometries,” Journal of Engineering for Gas Turbines and Power, vol. 139, no. 4, pp. 042603, 2016. View at Publisher · View at Google Scholar
  • Lavagnoli, Andreoli, and De Maesschalck, “Design considerations for tip clearance control and measurement on a turbine rainbow rotor with multiple blade tip geometries,” Proceedings of the ASME Turbo Expo, vol. 6, 2016. View at Publisher · View at Google Scholar
  • José Gil-García, Alejandro Solís, Gerardo Aranguren, and Joseba Zubia, “An Architecture for On-Line Measurement of the Tip Clearance and Time of Arrival of a Bladed Disk of an Aircraft Engine,” Sensors, vol. 17, no. 10, pp. 2162, 2017. View at Publisher · View at Google Scholar
  • Jia Binghui, and He Lei, “An Optical Fiber Measurement System for Blade Tip Clearance of Engine,” International Journal of Aerospace Engineering, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Gaizka Durana, Josu Amorebieta, Ruben Fernandez, Josu Beloki, Eneko Arrospide, Iker Garcia, and Joseba Zubia, “Design, Fabrication and Testing of a High-Sensitive Fibre Sensor for Tip Clearance Measurements,” Sensors, vol. 18, no. 8, pp. 2610, 2018. View at Publisher · View at Google Scholar
  • Fujuan Tong, Wenxuan Gou, Lei Li, Wenjing Gao, and Zhu Feng Yue, “Thermomechanical stress analysis for gas turbine blade with cooling structures,” Multidiscipline Modeling in Materials and Structures, 2018. View at Publisher · View at Google Scholar
  • Nidhal Jamia, Michael I. Friswell, Sami El-Borgi, and Prakash Rajendran, “Modelling and Experimental Validation of Active and Passive Eddy Current Sensors for Blade Tip Timing,” Sensors and Actuators A: Physical, 2018. View at Publisher · View at Google Scholar
  • Rafał Grądzki, Paweł Lindstedt, Zbigniew Kulesza, and Błażej Bartoszewicz, “Rotor Blades Diagnosis Method Based on Differences in Phase Shifts,” Shock and Vibration, vol. 2018, pp. 1–13, 2018. View at Publisher · View at Google Scholar
  • Nidhal Jamia, Michael I Friswell, Sami El-Borgi, and Ralston Fernandes, “Simulating eddy current sensor outputs for blade tip timing,” Advances in Mechanical Engineering, vol. 10, no. 1, pp. 168781401774802, 2018. View at Publisher · View at Google Scholar
  • Rubén Fernández-Bello, Josu Amorebieta, Josu Beloki, Gotzon Aldabaldetreku, Iker García, Joseba Zubia, and Gaizka Durana, “Performance Comparison of Three Fibre-Based Reflective Optical Sensors for Aero Engine Monitorization,” Sensors, vol. 19, no. 10, pp. 2244, 2019. View at Publisher · View at Google Scholar
  • Jiang Wu, Bin Wen, Yu Zhou, Qi Zhang, Shuiting Ding, Farong Du, and Shuguang Zhang, “Eddy Current Sensor System for Blade Tip Clearance Measurement Based on a Speed Adjustment Model,” Sensors, vol. 19, no. 4, pp. 761, 2019. View at Publisher · View at Google Scholar