Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2012 (2012), Article ID 142173, 14 pages
http://dx.doi.org/10.1155/2012/142173
Research Article

Gas Turbine Health State Determination: Methodology Approach and Field Application

Dipartimento di Ingegneria, Università degli Studi di Ferrara, Via G. Saragat, 1-44122 Ferrara, Italy

Received 30 September 2011; Accepted 3 November 2011

Academic Editor: Rainer Kurz

Copyright © 2012 Michele Pinelli et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. F. Hoeft, “Heavy duty gas turbine operating and maintenance considerations,” in Proceedings of the 39th GE Turbine State-of-the-Art Technology Seminar, GER-3620D, 1996.
  2. T. P. Schmitt and C. G. Petroff, “Gas turbine performance monitoring and testing,” in Proceedings of the 39th GE Turbine State-of-the-Art Technology Seminar, GER-3958, 1996.
  3. R. Bettocchi, M. Pinelli, P. R. Spina, M. Venturini, and S. Sebastianelli, “A system for health state determination of natural gas compression gas turbines,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper 2001-GT-223, 2001.
  4. D. Therkorn, “Remote monitoring & diagnostic for combined-cycle power plants,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2005-68710, pp. 697–703, June 2005.
  5. H. R. Depold and J. Siegel, “Using diagnostics and prognostics to minimize the cost of ownership of gas turbines,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2006-91183, pp. 845–851, May 2006.
  6. E. Hindle, R. Van Stone, C. Brogan, J. Vandike, K. Dale, and N. Gibson, “A prognostic and diagnostic approach to engine health management,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2006-90614, pp. 673–680, May 2006.
  7. L. C. Jaw, “Recent advancements in aircraft Engine Health Management (EHM) technologies and recommendations for the next step,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2005-68625, pp. 683–695, June 2005.
  8. L. A. Urban, “Gas path analysis applied to turbine engine condition monitoring,” in Proceedings of the AIAA/SAE 8th Joint Propulsion Conference, New Orleans, La, USA, 1972.
  9. A. Stamatis, K. Mathioudakis, and K. D. Papailiou, “Adaptive simulation of gas turbine performance,” ASME Journal of Engineering for Gas Turbines and Power, vol. 112, pp. 168–175, 1990. View at Google Scholar
  10. E. Benvenuti, R. Bettocchi, G. Cantore, G. Negri di Montenegro, and P. R. Spina, “Gas turbine cycle modeling oriented to component performance evaluation from limited design or test data,” in Proceedings of the 7th ASME COGEN-TURBO, vol. 8, pp. 327–337, IGTI, Bournemouth, UK, 1993.
  11. E. Benvenuti, R. Bettocchi, G. Cantore, G. Negri di Montenegro, and P. R. Spina, “Experimental validation of a gas turbine cycle model based on a simultaneous solution method,” in Proceedings of the 8th ASME COGEN-TURBO, vol. 9, pp. 245–255, IGTI, Portland, Ore, USA, 1994.
  12. R. Bettocchi and P. R. Spina, “Diagnosis of gas turbine operating conditions by means of the inverse cycle calculation,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper 99-GT-185, 1999.
  13. R. Bettocchi, M. Pinelli, P. R. Spina, and M. Venturini, “Artificial intelligence for the diagnostics of gas turbines—part 1: neural network approach,” Journal of Engineering for Gas Turbines and Power, vol. 129, no. 3, pp. 711–719, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Bettocchi, M. Pinelli, P. R. Spina, and M. Venturini, “Artificial intelligence for the diagnostics of gas turbines—part II: neuro-fuzzy approach,” Journal of Engineering for Gas Turbines and Power, vol. 129, no. 3, pp. 720–729, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Bettocchi, M. Pinelli, P. R. Spina, M. Venturini, and G. A. Zanetta, “Assessment of the robustness of gas turbine diagnostics tools based on neural networks,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2006-90118, pp. 603–613, May 2006.
  16. M. Bianchi, A. Peretto, and P. R. Spina, “Modular dynamic model of multi-shaft gas turbine and validation test,” in Proceedings of the Winter Annual Meeting of ASME, vol. 38, pp. 73–81, AES, Anaheim, Calif, USA, 1998.
  17. M. Venturini, “Development and experimental validation of a compressor dynamic model,” Journal of Turbomachinery, vol. 127, no. 3, pp. 599–608, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Morini, M. Pinelli, and M. Venturini, “Development of a one-dimensional modular dynamic model for the simulation of surge in compression systems,” Journal of Turbomachinery, vol. 129, no. 3, pp. 437–447, 2007. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Morini, M. Pinelli, and M. Venturini, “Application of a one-dimensional modular dynamic model for compressor surge avoidance,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2007-27041, pp. 1425–1434, May 2007.
  20. M. Morini, G. Cataldi, M. Pinelli, and M. Venturini, “A model for the simulation of large-size single-shaft gas turbine start-up based on operating data fitting,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2007-27373, pp. 1849–1856, May 2007.
  21. M. Morini, M. Pinelli, and M. Venturini, “Analysis of biogas compression system dynamics,” Applied Energy, vol. 86, no. 11, pp. 2466–2475, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Venturini, “Simulation of compressor transient behavior through recurrent neural network models,” Journal of Turbomachinery, vol. 128, no. 3, pp. 444–454, 2006. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Venturini, “Optimization of a real-time simulator based on recurrent neural networks for compressor transient behavior prediction,” Journal of Turbomachinery, vol. 129, no. 3, pp. 468–478, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Pinelli, P. R. Spina, and M. Venturini, “Optimized operating point selection for gas turbine health state analysis by using a multi-point technique,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2003-38191, pp. 43–51, June 2003.
  25. Y. G. Li, “Gas turbine diagnosis using a fault isolation enhanced GPA,” in Proceedings of the Turbine Technical Conference and Exposition, pp. 361–369, June 2004.
  26. A. I. Zwebek and P. Pilidis, “Application of GPA to combined cycle gas turbine plants,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2004-53026, pp. 225–232, June 2004.
  27. O. Córdoba, “Gas path analysis study for overhaul engines,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2005-68137, pp. 497–505, June 2005.
  28. M. Morini, M. Pinelli, P. R. Spina, and M. Venturini, “Influence of blade deterioration on compressor and turbine performance,” Journal of Engineering for Gas Turbines and Power, vol. 132, no. 3, Article ID 032401, 2010. View at Publisher · View at Google Scholar
  29. P. R. Spina, “Gas turbine performance prediction by using generalized performance curves of compressor and turbine stages,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT-2002-30275, pp. 1073–1082, June 2002.
  30. M. Bagnoli, M. Bianchi, F. Melino, and P. R. Spina, “Development and validation of a computational code for wet compression simulation of gas turbines,” Journal of Engineering for Gas Turbines and Power, vol. 130, no. 1, Article ID 012004, 2008. View at Publisher · View at Google Scholar
  31. M. Bagnoli, M. Bianchi, F. Melino et al., “Application of a computational code to simulate interstage injection effects on GE frame 7EA gas turbine,” Journal of Engineering for Gas Turbines and Power, vol. 130, no. 1, Article ID 012001, 2008. View at Publisher · View at Google Scholar
  32. M. Morini, M. Pinelli, P. R. Spina, and M. Venturini, “Computational fluid dynamics simulation of fouling on axial compressor stages,” Journal of Engineering for Gas Turbines and Power, vol. 132, no. 7, Article ID 072401, 2010. View at Publisher · View at Google Scholar
  33. M. Morini, M. Pinelli, P. R. Spina, and M. Venturini, “Numerical analysis of the effects of non-uniform surface roughness on compressor stage performance,” Journal of Engineering for Gas Turbines and Power, vol. 133, no. 7, Article ID 072402, 2011. View at Google Scholar
  34. M. Pinelli, M. Morini, P. R. Spina, M. Venturini, and C. Ferrari, “Analysis of the effects of simulated fouling on an axial compressor stage through CFD modeling,” in Proceedings of the 9th European Conference on Turbomachinery, M. Sen, G. Bois, M. Manna, and T. Arts, Eds., vol. 1, pp. 261–270, Istanbul, Turkey, 2011.
  35. F. Melino, M. Morini, A. Peretto, M. Pinelli, and P. R. Spina, “Compressor fouling modeling: relationship between computational roughness and gas turbine operation time,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2011-46089, 2011.
  36. R. Bettocchi, M. Pinelli, and P. R. Spina, “A multistage compressor test facility: uncertainty analysis and preliminary test results,” Journal of Engineering for Gas Turbines and Power, vol. 127, no. 1, pp. 170–177, 2005. View at Publisher · View at Google Scholar · View at Scopus
  37. M. Morini, M. Pinelli, and M. Venturini, “Acoustic and vibrational analyses on a multi-stage compressor for unstable behavior precursor identification,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2007-27040, pp. 1415–1423, May 2007.
  38. R. Bettocchi, M. Morini, M. Pinelli, P. R. Spina, M. Venturini, and G. Torsello, “Setup of an experimental facility for the investigation of wet compression on a multistage compressor,” Journal of Engineering for Gas Turbines and Power, vol. 133, no. 10, Article ID 102001, 2011. View at Publisher · View at Google Scholar
  39. R. Bettocchi, P. R. Spina, and E. Benvenuti, “Set-up of an adaptive method for the diagnosis of gas turbine operating state by using test-Bench measurements,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper 2000-GT-0309, 2000.
  40. A. Stamatis, K. Mathioudakis, and K. Papailiou, “Optimal measurement and health index selection for gas turbine performance status and fault diagnosis,” Journal of Engineering for Gas Turbines and Power, vol. 114, no. 2, pp. 209–216, 1992. View at Google Scholar · View at Scopus
  41. M. Pinelli and P. R. Spina, “Gas turbine field performance determination: sources of uncertainties,” Journal of Engineering for Gas Turbines and Power, vol. 124, no. 1, pp. 155–160, 2002. View at Publisher · View at Google Scholar · View at Scopus
  42. Y. G. Li, P. Pilidis, and M. A. Newby, “An adaptation approach for gas turbine design-point performance simulation,” in Proceedings of the Turbine Technical Conference and Exposition, pp. 95–105, usa, June 2005.
  43. M. Pinelli and M. Venturini, “Improvement of the accuracy in gas turbine health determination,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper 2001-GT-476, 2001.
  44. M. Pinelli, M. Venturini, and M. Burgio, “Statistical methodologies for reliability assessment of gas turbine measurements,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2003-38407, pp. 787–793, June 2003.
  45. H. DePold, A. Volponi, J. Siegel, and J. Hull, “Validation of diagnostic data with statistical analysis and embedded knowledge,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper 2003-GT-38764, pp. 573–579, June 2003.
  46. P. C. Chen and H. Andersen, “The implementation of the data validation process in a gas turbine performance monitoring system,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2005-68429, pp. 609–616, June 2005.
  47. P. Hartner, J. Petek, P. Pechtl, and P. Hamilton, “Model-based data reconciliation to improve accuracy and reliability of performance evaluation of thermal power plants,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2005-68937, pp. 195–200, June 2005.
  48. S. C. Gulen and R. W. Smith, “A simple mathematical approach to data reconciliation in a single-shaft combined-cycle system,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2006-90145, pp. 479–491, May 2006.
  49. K. Mathioudakis and P. Kamboukos, “Assessment of the effectiveness of gas path diagnostic schemes,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2004-53862, pp. 723–731, June 2004.
  50. S. W. Butler, K. R. Pattipati, A. Volponi, J. Hull, R. Rajamani, and J. Siegel, “An assessment methodology for data-driven and model-based techniques for engine health monitoring,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2006-91096, pp. 823–831, May 2006.
  51. C. Romessis, P. Kamboukos, and K. Mathioudakis, “The use of probabilistic reasoning to improve least squares based gas path diagnostics,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2006-90619, pp. 681–689, May 2006.
  52. R. Bettocchi, M. Pinelli, P. R. Spina, and M. Venturini, “Statistical analyses to improve gas turbine diagnostics reliability,” in Proceedings of the IGTC, Paper IGTC2003-Tokyo TS-004, 2003.
  53. M. Pinelli and M. Venturini, “Operating state historical data analysis to support gas turbine malfunction detection,” in Proceedings of the Turbine Technical Conference and Exposition, ASME IMECE2001/AES-23665, pp. 457–462, November 2001.
  54. P. R. Spina, “Reliability in the determination of gas turbine operating state,” in Proceedings of the 39th IEEE Conference on Decision and Control, Paper CDC00-INV5805, Sydney, Australia, 2000.
  55. R. Bettocchi, M. Pinelli, M. Venturini, P. R. Spina, S. Bellagamba, and G. Tirone, “Procedura di calibrazione del programma per la diagnosi funzionale dei turbogas della centrale a ciclo combinato di la spezia,” in Proceedings of the Atti del 57th Congresso Nazionale ATI, Pisa, Italy, 2002.
  56. A. Gulati, M. Zedda, and R. Singh, “Gas turbine engine and sensor multiple operating point analysis using optimization techniques,” in Proceedings of the 36th AIAA/ASME/ SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA 2000-3716, 2000.
  57. R. Bettocchi, M. Pinelli, M. Venturini, P. R. Spina, S. Sebastianelli, and F. Bezzi, “A software tool for gas turbine on-condition monitoring and diagnostics,” in Proceedings of OMC The Mediterranean: New Oil and Gas Routes for an Ancient Sea, Ravenna, Italy, 2003.
  58. P. R. Spina, G. Torella, and M. Venturini, “The use of expert systems for gas turbine diagnostics and maintenance,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT-2002-30033, pp. 127–134, June 2002.
  59. N. Puggina and M. Venturini, “Development of a statistical methodology for gas turbine prognostics,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2011-45708, 2011.
  60. A. Cavarzere and M. Venturini, “Application of forecasting methodologies to predict gas turbine behavior over time,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2011-45708, 2011.
  61. R. Bettocchi, P. R. Spina, M. Pinelli, M. Venturini, and M. Burgio, “Set up of a robust neural network for gas turbine simulation,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT2004-53421, pp. 543–551, June 2004.
  62. P. R. Spina and M. Venturini, “Gas turbine modeling by using neural networks trained on field operating data,” in Proceedings of the ECOS, vol. 1, pp. 213–222, Padova, Italy, 2007.
  63. Visual Numerics, Inc., “IMSL MATH/LIBRARY: FORTRAN Subroutines for Mathematical Applications,” Houston, Texas, USA, 1994.
  64. R. Bettocchi, P. R. Spina, and S. Alliney, “Resolution method for gas turbine mathematical models,” in Proceedings of the 8th ASME COGEN-TURBO, vol. 9, pp. 361–369, Portland, Ore, USA, 1994.
  65. M. Pinelli and M. Venturini, “Application of methodologies to evaluate the health state of gas turbines in a cogenerative combined cycle power plant,” in Proceedings of the Turbine Technical Conference and Exposition, ASME Paper GT-2002-30248, pp. 187–195, June 2002.
  66. ISO 2314, “Gas Turbine—Acceptance Tests,” International Standard, 1989.
  67. I. S. Diakunchak, “Performance deterioration in industrial gas turbines,” Journal of Engineering for Gas Turbines and Power, vol. 114, no. 2, pp. 161–168, 1992. View at Google Scholar · View at Scopus
  68. H. I. H. Saravanamuttoo and B. D. Maclsaac, “Thermodynamic models for pipeline gas turbine diagnostics,” Journal of Engineering for Power, vol. 105, no. 4, pp. 875–884, 1983. View at Google Scholar · View at Scopus