Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2012, Article ID 259293, 8 pages
Research Article

Control of Surge in Centrifugal Compressor by Using a Nozzle Injection System: Universality in Optimal Position of Injection Nozzle

1Production Systems Engineering Course, Tokyo Metropolitan College of Industrial Technology, 1-10-40 Higashiohi, Shinagawa-ku, Tokyo 140-0011, Japan
2Graduate School of Engineering, Hosei University, 3-7-2 Kajinocho, Koganei-shi, Tokyo 184-8584, Japan
3Department of Mechanical Engineering, Faculty of Science and Engineering, Hosei University, Tokyo, Japan

Received 20 July 2012; Revised 28 September 2012; Accepted 9 October 2012

Academic Editor: N. Sitaram

Copyright © 2012 Toshiyuki Hirano et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Suzuki, H. Tsujita, and S. Mizuki, “Passive control of surge for centrifugal compressor by using resonator,” in Proceedings of the 4th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, vol. 2, pp. 226–233, 1999.
  2. H. Tamaki, X. Zheng, and Y. Zhang, “Experimental investigation of high pressure ratio centrifugal compressor with axisymmetric and non-axisymmetric recirculation device,” in Proceedings of the ASME International Gas Turbine Institute (IGTI '12), 2012.
  3. S. Mizuki, H. Tsujita, and Y. Hishinuma, “Control of surge for centrifugal compression system by using a bouncing ball,” ASME Paper 2000-GT-429, 2000. View at Google Scholar
  4. F. Willemas and B. De Jager, “One-sided control of surge in a centrifugal compressor system,” ASME Paper 2000-GT-527, 2000. View at Google Scholar
  5. G. J. Skoch, “Experimental investigation of diffuser hub injection to improve centrifugal compressor stability,” NASA/TM 2004-213182, 2004. View at Google Scholar
  6. H. Chen and V. Lei, “Casing treatment & inlet swirl of centrifugal compressors,” in Proceedings of the ASME International Gas Turbine Institute (IGTI '12), 2012.
  7. R. Gu and M. Yashiro, “Surge control for centrifugal compressor of turbocharger,” JSAE Paper, vol. 36, no. 2, pp. 83–88, 2005. View at Google Scholar
  8. R. Gu, H. Ikeda, A. Yoshida, H. Tsujita, and S. Mizuki, “Effect of air injection on performance characteristics of small centrifugal compressor,” in Proceedings of the Turbomachinery Society of Japan, May 2007.
  9. R. Gu, S. Mizuki, and H. Tsujita, “Surge control of centrifugal compressor by inducer tip injection,” in Proceedings of the International Gas Turbine Congress (IGTC '07), Tokyo, Japan, 2007.