Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2012, Article ID 348939, 22 pages
http://dx.doi.org/10.1155/2012/348939
Research Article

EFD and CFD Characterization of a CLT Propeller

1Department of Naval Architecture, Marine Engineering and Electrical Engineering (DINAEL), Genoa University, 16126 Genoa, Italy
2Department of Mechanical Engineering (DIME), Genoa University, 16126 Genoa, Italy

Received 2 February 2012; Accepted 10 May 2012

Academic Editor: Francesco Salvatore

Copyright © 2012 Daniele Bertetta et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Pyo, Numerical modeling of propeller tip flows with wake sheet roll up in three dimensions [Ph.D. thesis], Massachusetts Institute of Technology, Cambridge, Mass, USA, 1996.
  2. S. Gaggero, Development of a potential panel method for the analysis of marine cavitating and supercavitating propellers [Ph.D. thesis], University of Genova, Genoa, Italy, 2010.
  3. D. Greeley, Marine propeller blade tip flows [Ph.D. thesis], Massachusetts Institute of Technology, Cambridge, Mass, USA, 1982.
  4. G. Dyne, “On the principles of propellers with endplates,” International Journal of Maritime Engineering, vol. 147, no. 3, 2005. View at Publisher · View at Google Scholar
  5. A. Sanchez-Caja, T. Sipila, and J. Pylkkanen, “Simulation of the incompressible viscous flow around an endplate propeller using a RANSE solver,” in Proccedings of the 26th Symposium on Naval Hydrodynamics, Rome, Italy, 2006.
  6. S. Gaggero, S. Brizzolara et al., “Endplate effect propellers: a numerical overview,” in Sustainable Maritime Transportation and Exploitation of Sea Resources, E. Rizzuto, S. C. Guede et al., Eds., CRC Press, Balkema, 2011. View at Google Scholar
  7. E. Canepa, A. Cattanei, M. Ferrando et al., “Studio sperimentale del flusso attorno ad un’elica per propulsione navale,” in Proceedings of the Metodi di Sperimentazione delle Macchine (MIS MAC 7), Cagliari, Italy, April 2001.
  8. K. S. Min, “Numerical and experimental methods for the prediction of field point velocities around propeller blades,” Tech. Rep., MIT Ocean Engineering Department, 1978. View at Google Scholar
  9. B. Lakshminarayana, “Techniques for aerodynamic and turbulence measurements in turbomachinery rotors,” Journal of Engineering for Power, vol. 103, no. 2, pp. 374–392, 1981. View at Google Scholar · View at Scopus
  10. A. Boutier, Accuracy of Laser Velocimetry, Lecture Series 1991–05, VKI, Brussels, Belgium, 1991.
  11. T. Strazisar, “Laser Anemometry in Compressors and Turbines,” ASME Lecture on Fluid Dynamics of Turbomachinery, 1986.
  12. D. Modarress, H. Tan, and A. Nakayama, “Evaluation of signal processing techniques in laser anemometry,” in Proceedings of the 4th International Symposium on Application of Laser Anemometry to Fluid Dynamics, Lisbon, Portugal, 1988.
  13. S. Gaggero and S. Brizzolara, “A panel method for trans-cavitating marine propellers,” in Proceedings of the 7th International Symposium on Cavitation, Ann Arbor, Michigan, Mich, USA, 2009.
  14. A. C. Mueller and S. A. Kinnas, “Propeller sheet cavitation predictions using a panel method,” Journal of Fluids Engineering, vol. 121, no. 2, pp. 282–288, 1999. View at Google Scholar · View at Scopus
  15. G. S. Hufford, Viscous flow around marine propellers using boundary layer strip theory [Ph.D. thesis], Massachusetts Institute of Technology, Cambridge, Mass, USA, 1992.
  16. H. Curle, “A two parameter method For calculating the two dimensional incompressible laminar boundary layer,” Journal of the Aeronautical Society, vol. 71, 1967. View at Google Scholar · View at Scopus
  17. J. F. Nash and J. G. Hicks, “An integral method including the effect of upstream history on the turbulent shear stress for the computation of turbulent boundary layer,” in Proceedings of the FOSR-IFT Stanford Conference, Stanfor University Press, 1969.
  18. CD-Adapco 2010, StarCCM+ v5 User’s Manual, 2010.
  19. SILENV—Ship Oriented Innovative Solutions to reduce Noise and Vibrations, FP7 Collaborative Project 234182, Work Package 3, Subtask 3.1.1: Propellers, 2011.
  20. J. S. Carlton, Marine Propellers and Propulsion, Butterworth-Heinemann, 2nd edition, 2007.
  21. D. Bertetta, S. Brizzolara, S. Gaggero, L. Savio, and M. Viviani, “Numerical and experimental characterization of a CP propeller unsteady cavitation at different pitch settings,” in Proceedings of the 2nd International Symposium on Marine Propulsors, Hamburg, Germany, June, 2011.
  22. D. Bertetta, S. Brizzolara, S. Gaggero, L. Savio, and M. Viviani, “Numerical and experimental optimization of a CP propeller at different pitch settings,” in Proceedings of the International Maritime Association of the Mediterranean, Genoa, Italy, September 2011.