Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2012, Article ID 957421, 28 pages
http://dx.doi.org/10.1155/2012/957421
Review Article

Aerodynamic Losses in Turbines with and without Film Cooling, as Influenced by Mainstream Turbulence, Surface Roughness, Airfoil Shape, and Mach Number

Department of Aerospace and Mechanical Engineering, Parks College of Engineering, Aviation, and Technology, Saint Louis University, 3450 Lindell Boulevard, McDonnell Douglas Hall Room 1033A, St. Louis, MO 63103, USA

Received 22 July 2011; Revised 8 January 2012; Accepted 11 January 2012

Academic Editor: Ting Wang

Copyright © 2012 Phil Ligrani. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • Wenwu Zhou, and Hui Hu, “An Experimental Study of Barchan-Dune-Shaped Injection Compounds for Improved Film Cooling Effectiveness,” 32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference, . View at Publisher · View at Google Scholar
  • Ranjan Saha, Jens Fridh, Torsten Fransson, Boris I. Mamaev, and Mats Annerfeldt, “Suction and pressure side film cooling influence on vane aero performance in a transonic annular cascade,” Proceedings of the ASME Turbo Expo, vol. 6, 2013. View at Publisher · View at Google Scholar
  • Yonghui Xie, Zhongyang Shen, and Jibing Lan, “Thermal Performance of a Water-Cooled Microchannel Heat Sink With Grooves and Obstacles,” Journal of Electronic Packaging, vol. 136, no. 2, 2014. View at Publisher · View at Google Scholar
  • Yanmin Qin, Hong Yin, Jing Ren, and Hongde Jiang, “Aerodynamic analysis of film cooling jet under different main stream pressure gradient,” Proceedings of the ASME Turbo Expo, vol. 5B, 2015. View at Publisher · View at Google Scholar
  • Francesco Lanzillotta, Andrea Sciacchitano, and Arvind Gangoli Rao, “Effect of film cooling on the aerodynamic performance of an airfoil,” International Journal of Heat and Fluid Flow, vol. 66, pp. 108–120, 2017. View at Publisher · View at Google Scholar
  • Wenwu Zhou, and Hui Hu, “A novel sand-dune-inspired design for improved film cooling performance,” International Journal of Heat and Mass Transfer, vol. 110, pp. 908–920, 2017. View at Publisher · View at Google Scholar
  • Zhongran Chi, Haiqing Liu, and Shusheng Zang, “Parametric cooling study of single-row cylindrical film holes on pressure side of a rotor blade,” Proceedings of the ASME Turbo Expo, vol. 5, 2017. View at Publisher · View at Google Scholar