International Journal of Rotating Machinery
Volume 2013 (2013), Article ID 258197, 12 pages
http://dx.doi.org/10.1155/2013/258197
Research Article
Effect of Dynamic Center Region on the Flow and Mixing Efficiency in a New Tri-Screw Extruder Using 3D Finite Element Modeling
School of Mechanical Engineering, Liaoning Shihua University, Liaoning, Fushun 113001, China
Received 30 April 2013; Accepted 3 September 2013
Academic Editor: Hyeong Joon Ahn
Copyright © 2013 X. Z. Zhu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
X. Z. Zhu, Y. D. He, and G. Wang, “Effect of Dynamic Center Region on the Flow and Mixing Efficiency in a New Tri-Screw Extruder Using 3D Finite Element Modeling,” International Journal of Rotating Machinery, vol. 2013, Article ID 258197, 12 pages, 2013. doi:10.1155/2013/258197