Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2013, Article ID 293486, 12 pages
http://dx.doi.org/10.1155/2013/293486
Research Article

Design and Performance Evaluation of a Very Low Flow Coefficient Centrifugal Compressor

1Key Laboratory of Advanced Energy and Power Chinese Academy of Sciences, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China
2Graduate University of Chinese Academy of Sciences, Beijing 100190, China
3Department of Mechanical Engineering, Michigan State University, East Lansing, MA 48823, USA

Received 1 August 2013; Accepted 16 September 2013

Academic Editor: Masaru Ishizuka

Copyright © 2013 Yongsheng Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • Hang Xiang, Jiang Chen, and Cheng Jinxin, “Optimum Blade Number and Splitter Blade Length of a Mixed-flow Impeller Based on Mean Streamline Loss Model,” 2018 Joint Propulsion Conference, . View at Publisher · View at Google Scholar
  • Ys Wang YongSheng, K Wang Kai, F Lin Feng, Cq Nie ChaoQun, and Abraham Engeda, “Performance analysis and improvement of a high flow coefficient centrifugal compressor,” Science China-Technological Sciences, vol. 57, no. 8, pp. 1647–1657, 2014. View at Publisher · View at Google Scholar
  • S. Shaaban, “Design optimization of a centrifugal compressor vaneless diffuser,” International Journal of Refrigeration, 2015. View at Publisher · View at Google Scholar
  • Yu Wan, Jinping Guan, and Sichuan Xu, “Improved empirical parameters design method for centrifugal compressor in PEM fuel cell vehicle application,” International Journal of Hydrogen Energy, 2016. View at Publisher · View at Google Scholar
  • Qi Liang, Hongtao Tang, Xue Yan, Zhitao Zuo, and Haisheng Chen, “Research of off-design performance prediction model of centrifugal compressor with adjustable guide vane,” Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, vol. 36, no. 12, pp. 3381–3389, 2016. View at Publisher · View at Google Scholar
  • Hong Zhang, Hang Zhang, and Zhuo Wang, “Effect on Vehicle Turbocharger Exhaust Gas Energy Utilization for the Performance of Centrifugal Compressors under Plateau Conditions,” Energies, vol. 10, no. 12, pp. 2121, 2017. View at Publisher · View at Google Scholar
  • Zhiyuan Liu, Weiwei Luo, Qingjun Zhao, Wei Zhao, and Jianzhong Xu, “Preliminary Design and Model Assessment of a Supercritical CO2 Compressor,” Applied Sciences, vol. 8, no. 4, pp. 595, 2018. View at Publisher · View at Google Scholar