Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2013, Article ID 317473, 12 pages
http://dx.doi.org/10.1155/2013/317473
Research Article

Effects of Flow Rate and Viscosity on Slip Factor of Centrifugal Pump Handling Viscous Oils

Department of Fluid Machinery, Lanzhou University of Technology, 287 Langongping Road, Lanzhou, Gansu 730050, China

Received 14 March 2013; Revised 3 June 2013; Accepted 19 June 2013

Academic Editor: Ryoichi Samuel Amano

Copyright © 2013 Wen-Guang Li. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. G. Li, “Effect of exit blade angle, viscosity and roughness in centrifugal pumps investigated by CFD computation,” TASK Quarterly, vol. 15, no. 1, pp. 21–41, 2011. View at Google Scholar
  2. T. Kasai, “On the flow conditions at the exit of centrifugal impeller,” Journal of JSME, vol. 37, no. 202, pp. 60–69, 1934. View at Google Scholar
  3. T. Kasai, “On the exit velocity and slip coefficient at the outlet of centrifugal impeller with some references to the characteristics of pump,” Transactions of the Japan Society of Mechanical Engineers, vol. 1, no. 3, pp. 234–246, 1935. View at Google Scholar
  4. T. Sakai and I. Watanabe, “The slip factor of centrifugal and mixed-flow compressors,” Transactions of the Japan Society of Mechanical Engineers, vol. 33, no. 249, pp. 735–744, 1967. View at Google Scholar
  5. A. Noorbakhsh, “Theoretical and real slip factor in centrifugal pumps,” Technical Note 93, von Karman Institute for Fluid Dynamics, 1973. View at Google Scholar
  6. A. Whitfield, “Slip factor of a centrifugal compressor and its variation with flow rate,” Proceedings of the Institution of Mechanical Engineers, vol. 188, no. 32, pp. 415–421, 1974. View at Google Scholar · View at Scopus
  7. S. Murata, T. Ogawa, and M. Gotoh, “On the flow in a centrifugal impeller: 2nd report, effects of change in impeller width,” Bulletin of the JSME, vol. 21, no. 151, pp. 90–97, 1978. View at Google Scholar · View at Scopus
  8. H. Harada and Y. Senoo, “Equations of the blade loading and the slip factor of a centrifugal impeller,” Transactions of the Japan Society of Mechanical Engineers, Part B, vol. 52, no. 482, pp. 3525–3528, 1986. View at Google Scholar · View at Scopus
  9. F. C. Visser, J. J. H. Brouwers, and R. Badie, “Theoretical analysis of inertially irrotational and solenoidal flow in two-dimensional radial-flow pump and turbine impellers with equiangular blades,” Journal of Fluid Mechanics, vol. 269, pp. 107–142, 1994. View at Google Scholar · View at Scopus
  10. T. W. von Backström, “A unified correlation for slip factor in centrifugal impellers,” Journal of Turbomachinery, vol. 128, no. 1, pp. 1–10, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. W. C. Hassenpflug, “The incompressible two-dimensional potential flow through blades of a rotating radial impeller,” Mathematical and Computer Modelling, vol. 52, no. 9-10, pp. 1299–1389, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. C. Ji, J. Zou, X. D. Ruan, P. Dario, and X. Fu, “A new correlation for slip factor in radial and mixed-flow impellers,” Proceedings of the Institution of Mechanical Engineers, Part A, vol. 225, no. 1, pp. 114–119, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. X. Qiu, D. Japikse, J. Zhao, and M. R. Anderson, “Analysis and validation of a unified slip factor model for impellers at design and off-design conditions,” Journal of Turbomachinery, vol. 133, no. 4, Article ID 041018, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. F. J. Wiesner, “A review of slip factors for centrifugal impellers,” Journal of Engineering for Power, vol. 89, no. 4, pp. 558–572, 1967. View at Google Scholar
  15. Y. Sakamoto, “Slip factor dependence on flow rate in centrifugal compressors,” Transactions of the Japan Society of Mechanical Engineers, Part B, vol. 49, no. 446, pp. 2242–2247, 1983. View at Google Scholar · View at Scopus
  16. T. Toyokura, J. Kurokawa, and T. Kanemoto, “Performance improvement for centrifugal pump handling high viscosity oil,” Turbomachinery, vol. 7, no. 2, pp. 72–79, 1979. View at Google Scholar
  17. H. Ohta, “Effect of reynolds number on slip factor of centrifugal pump for high-viscosity liquids,” Transactions of the Japan Society of Mechanical Engineers, Part B, vol. 65, no. 639, pp. 3697–3704, 1999. View at Google Scholar · View at Scopus
  18. E.-M. Guo and K.-Y. Kim, “Three-dimensional flow analysis and improvement of slip factor model for forward-curved blades centrifugal fan,” KSME International Journal, vol. 18, no. 2, pp. 302–312, 2004. View at Google Scholar · View at Scopus
  19. J. A. Caridad and F. Kenyery, “Slip factor for centrifugal impellers under single and two-phase flow conditions,” Journal of Fluids Engineering, vol. 127, no. 2, pp. 317–321, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Nishi, N. Matsuo, and J. Fukutomi, “Loss analysis of a new type of sewage pump,” Journal of Environment and Engineering, vol. 4, no. 2, pp. 362–374, 2009. View at Google Scholar
  21. H. A. Elsheshtawy, “Numerical study of slip factor in centrifugal pumps ad study factors affecting its performance,” in Proceedings of the 1st International Conference on Mechanical Engineering and Material Science, pp. 103–106, 2012.
  22. J. M. Huang, K. W. Luo, C. F. Chen et al., “Numerical investigations of slip phenomena in centrifugal impellers,” International Journal of Turbo & Jet-Engines, vol. 30, no. 1, pp. 123–132, 2013. View at Google Scholar
  23. J. P. Veres, “Centrifugal and axial pump design and off-design performance prediction,” NASA Technical Memorandum 106745, 1994. View at Google Scholar
  24. Y.-D. Choi, J. Kurokawa, and J. Malsui, “Performance and internal flow characteristics of a very low specific speed centrifugal pump,” Journal of Fluids Engineering, vol. 128, no. 2, pp. 341–349, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. C. E. Brennen, Hydrodynamics of Pumps, Oxford University Press, Oxford, UK, 1994.
  26. W. G. Li and Z. M. Hu, “Experiments on the performance of centrifugal oil pump,” Chinese Fluid Machinery, vol. 25, no. 2, pp. 3–8, 1996. View at Google Scholar
  27. W.-G. Li, “Effects of viscosity of fluids on centrifugal pump performance and flow pattern in the impeller,” International Journal of Heat and Fluid Flow, vol. 21, no. 2, pp. 207–212, 2000. View at Publisher · View at Google Scholar · View at Scopus
  28. W.-G. Li, “Flow of viscous oil in the volute of a centrifugal pump,” Journal of Thermal Science, vol. 11, no. 1, pp. 10–15, 2002. View at Google Scholar · View at Scopus
  29. S. Lazarkiewicz and A. T. Troskolanski, Impeller Pumps, Pergamon Press, Oxford, UK, 1965.
  30. A. J. Acosta and A. Hollander, “Observations on the performance of centrifugal pumps at low Reynolds numbers,” in Proceedings of the Symposium on Pump Design, Testing and Operation, Glasgow, UK, 1965.
  31. J. F. Peck, “Investigation concerning flow conditions in a centrifugal pump and effect of blade loading on head slip,” Proceedings of Institution of Mechanical Engineers, vol. 164, no. 1, pp. 1–30, 1951. View at Google Scholar
  32. J. F. Gulich, Centrifugal Pumps, Springer, Heidelberg, Germany, 2010.
  33. J. Kurokawa and S. Hode, “Prediction of outlet flow characteristics of centrifugal impellers,” Bulletin of the JSME, vol. 28, no. 241, pp. 1423–1429, 1985. View at Google Scholar · View at Scopus