Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2013, Article ID 896148, 11 pages
http://dx.doi.org/10.1155/2013/896148
Research Article

Optimum Design of Oil Lubricated Thrust Bearing for Hard Disk Drive with High Speed Spindle Motor

1Department of Mechanical Engineering, Tokai University, 4-1-1 Kitakaname, Hiratsuka-shi, Kanagawa-ken 259-1292, Japan
2Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia

Received 29 July 2013; Accepted 15 October 2013

Academic Editor: Masaru Ishizuka

Copyright © 2013 Yuta Sunami et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Yuta Sunami, Mohd Danial Ibrahim, and Hiromu Hashimoto, “Optimum Design of Oil Lubricated Thrust Bearing for Hard Disk Drive with High Speed Spindle Motor,” International Journal of Rotating Machinery, vol. 2013, Article ID 896148, 11 pages, 2013. https://doi.org/10.1155/2013/896148.