Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2016, Article ID 5327297, 12 pages
http://dx.doi.org/10.1155/2016/5327297
Research Article

Extended Calibration Technique of a Four-Hole Probe for Three-Dimensional Flow Measurements

Thermal Turbomachines Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600 036, India

Received 9 December 2015; Revised 2 April 2016; Accepted 25 May 2016

Academic Editor: Awatef Hamed

Copyright © 2016 Suresh Munivenkatareddy and Nekkanti Sitaram. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Suresh Munivenkatareddy and Nekkanti Sitaram, “Extended Calibration Technique of a Four-Hole Probe for Three-Dimensional Flow Measurements,” International Journal of Rotating Machinery, vol. 2016, Article ID 5327297, 12 pages, 2016. https://doi.org/10.1155/2016/5327297.