Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2016 (2016), Article ID 8518904, 10 pages
Research Article

Low-Cost Rotating Experimentation in Compressor Aerodynamics Using Rapid Prototyping

Department of Mechanical Engineering, École Polytechnique de Montréal, Campus UdeM, 2900 Boulevard Édouard-Montpetit, 2500 Chemin de Polytechnique, Office C318.9, Montréal, QC, H3T 1J4, Canada

Received 7 November 2015; Revised 8 January 2016; Accepted 20 January 2016

Academic Editor: Jechin Han

Copyright © 2016 Mathias Michaud et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Dunham and G. Meauzé, “An AGARD working group study of 3D Navier-Stokes codes applied to single turbomachinery blade rows,” in Proceedings of the ASME International Gas Turbine and Aeroengine Congress and Exhibition, ASME Paper Paper no. 98-GT-050, Stockholm, Sweden, June 1998. View at Publisher · View at Google Scholar
  2. AGARD, CFD Validation for Propulsion System Components, AGARD-AR-355, AGARD, Neuilly-sur-Seine, France, 1998, edited by: J. Dunham.
  3. R. Biollo and E. Benini, “Validation of a Navier-Stokes solver for CFD computations of transonic compressors,” in Proceedings of the 8th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA '06), vol. 1, pp. 507–514, Torino, Italy, July 2006. View at Scopus
  4. D. E. Van Zante, A. J. Strazisar, J. R. Wood, M. D. Hathaway, and T. H. Okiishi, “Recommendations for achieving accurate numerical simulation of tip clearance flows in transonic compressor rotors,” Journal of Turbomachinery, vol. 122, no. 4, pp. 733–742, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. M. L. Mansour, G. Holbrook, J. Gunaraj, M. Qizar, and V. Mangat, “Validation and calibration of modern CFD RANS codes for the prediction of transonic axial-centrifugal compressors,” in Proceedings of the ASME Turbo Expo: Power for Land, Sea, and Air, pp. 385–392, Berlin, Germany, June 2008. View at Publisher · View at Google Scholar
  6. C. Cornelius, T. Biesinger, P. Galpin, and A. Braune, “Experimental and computational analysis of a multistage axial compressor including stall prediction by steady and transient CFD methods,” Journal of Turbomachinery, vol. 136, no. 6, Article ID 061013, 12 pages, 2014. View at Publisher · View at Google Scholar
  7. N. A. Cumpsty, Compressor Aerodynamics, Longman Scientific & Technical, London, UK, 1989.
  8. H. D. Vo and J. Y. Trepanier, “Undergraduate project in compressor rig design, fabrication and testing for complete engineering training,” in Proceedings of the ASME Turbo Expo 2015: Power for Land, Sea and Air, Paper GT2015-43039, Montreal, Canada, June 2015.
  9. F. Ashrafi, M. Michaud, and H. D. Vo, “Delay of rotating stall in compressors using plasma actuators,” in Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition, ASME Paper no. GT2015-42559, Montreal, Canada, June 2015. View at Publisher · View at Google Scholar