Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2017 (2017), Article ID 6842938, 8 pages
https://doi.org/10.1155/2017/6842938
Research Article

Effects of Geometry Design Parameters on the Static Strength and Dynamics for Spiral Bevel Gear

1Guangxi Liugong Machinery Co., Ltd, Liuzhou, Guangxi 545007, China
2The State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing 400030, China

Correspondence should be addressed to Chaosheng Song; moc.liamtoh@gnosgnehsoahc

Received 15 April 2017; Revised 17 June 2017; Accepted 3 July 2017; Published 31 July 2017

Academic Editor: Paolo Pennacchi

Copyright © 2017 Zhiheng Feng and Chaosheng Song. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. J. Zhao and K. Dong, “Mechanical performance of involute spur gear with 28 degrees pressure angle,” Journal of Mechanical Transmission, vol. 28, no. 1, pp. 52-53, 2004. View at Google Scholar
  2. J. L. Huang, X. X. Miu, and S. M. Luo, “Influence analysis on the elasto hydrodynamic lubrication affected by pressure angle of gear,” Journal of Machine Design, vol. 23, no. 12, pp. 14-15, 2006. View at Google Scholar
  3. Q. Fan, “Tooth surface error correction for face-hobbed hypoid gears,” Journal of Mechanical Design, Transactions of the ASME, vol. 132, no. 1, pp. 0110041–0110048, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. Q. Fan, “Optimization of face cone element for spiral bevel and hypoid gears,” Journal of Mechanical Design, Transactions of the ASME, vol. 133, no. 9, Article ID 091002, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Kolivand and A. Kahraman, “An ease-off based method for loaded tooth contact analysis of hypoid gears having local and global surface deviations,” Journal of Mechanical Design, Transactions of the ASME, vol. 132, no. 7, pp. 0710041–0710048, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. M. A. Hotait, A. Kahraman, and T. Nishino, “An investigation of root stresses of hypoid gears with misalignments,” Journal of Mechanical Design, Transactions of the ASME, vol. 133, no. 7, Article ID 071006, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Yang, S. Mao, W. Guo, and Y. Kuang, “Pinion development of face-milled spiral bevel and hypoid gears based on contact attributes,” International Journal of Advanced Manufacturing Technology, vol. 84, no. 9–12, pp. 2347–2356, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Kawasaki, I. Tsuji, H. Gunbara, and H. Houjoh, “Method for remanufacturing large-sized skew bevel gears using CNC machining center,” Mechanism and Machine Theory, vol. 92, article no. 2504, pp. 213–229, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Tan, B. Chen, C. Peng, and X. Li, “Study on spatial curve meshing and its application for logarithmic spiral bevel gears,” Mechanism and Machine Theory, vol. 86, pp. 172–190, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. V. Simon, “Head-cutter for optimal tooth modifications in spiral bevel gears,” Mechanism and Machine Theory, vol. 44, no. 7, pp. 1420–1435, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. V. V. Simon, “Optimal machine-tool settings for the manufacture of face-hobbed spiral bevel gears,” Journal of Mechanical Design, Transactions of the ASME, vol. 136, no. 8, Article ID 081004, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Yang and T. C. Lim, “Influence of propeller shaft bending vibration on drivetrain gear dynamics,” International Journal of Automotive Technology, vol. 16, no. 1, pp. 57–65, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Peng, Coupled multi-body dynamic and vibration analysis of hypoid and bevel geared rotor system [Ph.D. thesis], University of Cincinnati, Ph.D. Dissertation, Cincinnati, OH, USA, 2010.
  14. Z. Feng, Research on multi-body muti-DOF nonlinear dynamic of helical bevel gear [Ph.D. thesis], Chongqing University, Ph.D. Dissertation, Chongqing, China, 2010.
  15. Z. Feng, S. Wang, T. C. Lim, and T. Peng, “Enhanced friction model for high-speed right-angle gear dynamics,” Journal of Mechanical Science and Technology, vol. 25, no. 11, pp. 2741–2753, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Wang, Z. Feng, S. Lei, and H. Xiao, “Effect of time-varying friction coefficient on dynamics of spiral bevel gears,” China Mechanical Engineering, vol. 22, no. 2, pp. 148–152, 2011. View at Google Scholar · View at Scopus
  17. H. Winter and K. Michaelis, “Scoring load capacity of gears lubricated with EP-oils,” Tech. Rep., AGMA Fall Technical Meeting, Montreal, Canada, 1983. View at Google Scholar
  18. D. Zhu and Y.-Z. Hu, “A computer program package for the prediction of EHL and mixed lubrication characteristics, friction, subsurface stresses and flash temperatures based on measured 3-D surface roughness,” Tribology Transactions, vol. 44, no. 3, pp. 383–390, 2001. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Castro and J. Seabra, “Coefficient of friction in mixed film lubrication: gears versus twin-discs,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 221, no. 3, pp. 399–411, 2007. View at Publisher · View at Google Scholar · View at Scopus