International Journal of Rotating Machinery
Volume 2019, Article ID 7415263, 12 pages
https://doi.org/10.1155/2019/7415263
CFD Modelling of a Centrifugal Compressor with Experimental Validation through Radial Diffuser Static Pressure Measurement
1Business Edge, 6 Dragoon House, Hussar Court, Westside View, Waterlooville, Hants, PO7 7SF, UK
2School of Mechanical and Design Engineering, University of Portsmouth, Anglesea Building, Portsmouth PO1 3DJ, UK
3School of Energy Systems, LUT University, P.O. Box 20, FI-53851 Lappeenranta, Finland
Correspondence should be addressed to Brett Dewar; moc.liamg@1rawedtterb
Received 15 January 2019; Revised 10 April 2019; Accepted 15 April 2019; Published 19 May 2019
Academic Editor: Ryoichi Samuel Amano
Copyright © 2019 Brett Dewar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Brett Dewar, Jonna Tiainen, Ahti Jaatinen-Värri, et al., “CFD Modelling of a Centrifugal Compressor with Experimental Validation through Radial Diffuser Static Pressure Measurement,” International Journal of Rotating Machinery, vol. 2019, Article ID 7415263, 12 pages, 2019. https://doi.org/10.1155/2019/7415263.