International Journal of Rotating Machinery

Table of Contents: 1999

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 870873

Transition to Fluid-Induced Limit Cycle Self-Excited Vibrations of a Rotor and Instability Threshold “Hysteresis”

Agnes Muszynska
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 103235

Secondary Flow Phenomena in an Axially Rotating Flow Passage with Sudden Expansion or Contraction

Shuichi Torii | Wen-Jei Yang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 545873

Experimental Investigation of Steady and Unsteady Flow Field Upstream and Downstream of an Automotive Torque Converter Pump

B. V. Marathe | B. Lakshminarayana
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 497625

Turbulence Amplification with Incidence at the Leading Edge of a Compressor Cascade

Garth V. Hobson | Bryce E. Wakefield | William B. Roberts
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 818340

Axial Compressor Stall and Surge Prediction by Measurements

H. Hönen
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 203865

Theoretical Rotordynamic Coefficients of Labyrinth Gas Seals: a Parametric Study on a Bulk Model

Paola Forte | Fabio Latini
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 312953

Modelling of Shaft Orbiting with 3-D Solid Finite Elements

J. Yu | A. Craggs | A. Mioduchowski
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 475101

Detection of Mechanical Abnormalities in Induction Motors by Electric Measurements

Andrzej M. Trzynadlowski
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 675189

Integrated Diagnostics and Prognostics of Rotating Machinery

Kam W. Ng
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 502037

Application of Through-Flow Calculation to Design and Performance Prediction of Centrifugal Compressor

Y. S. Choi | S. H. Kang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 5
  • - Article ID 785046

Heat (Mass) Transfer Distributions in a Rotating Two-Pass Channel with Angled Ribs

C. W. Park | S. C. Lau | R. T. Kukreja
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit