International Journal of Rotating Machinery

Table of Contents: 2004

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 785493

Partial Compensation of Unbalance by Oneand Two-Plane Automatic Balancing Devices

Boris Ryzhik | Henner Duckstein | Lutz Sperling
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 653241

Fault Diagnosis in a Centrifugal Pump Using Active Magnetic Bearings

Rainer Nordmann | Martin Aenis
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 546845

A Magnetorheological Fluid Damper for Rotor Applications

P. Forte | M. Paternò | E. Rustighi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 784568

Interaction of Squeeze Film Dampers and Hole Feed Systems and Its Influence on the Dynamics of a Jeffcott Rotor

Fabiano A. Rodrigues | Fabrice Thouverez | Louis Jezequel
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 915780

Unbalance Responses of Rotor/Stator Systems with Nonlinear Bearings by the Time Finite Element Method

D. Demailly | F. Thouverez | L. Jézéquel
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 247964

Discharge Coefficient Measurements for Flow Through Compound-Angle Conical Holes with Cross-Flow

M. E. Taslim | S. Ugarte
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 531643

Intermittent Flow Regimes in a Transonic Fan Airfoil Cascade

J. Lepicovsky | E. R. McFarland | ... | J. Hayden
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 358548

Crack Detectability in Vertical Axis Cooling Pumps During Operation

N. Bachschmid | P. Pennacchi | ... | K. Aabadi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 105043

Optimization of Meridional Flow Channel Design of Pump Impeller

Sunao Miyauchi | Hironori Horiguchi | ... | Akihiro Takahashi
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 839415

Pressure Drop Distribution in Smooth and Rib Roughened Square Channel with Sharp 180° Bend in the Presence of Guide Vanes

Venkata Ratna Rao.D | S. V. Prabhu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 315606

Parametric Study of Greitzer's Instability Flow Model Through Compressor System Using the Taguchi Method

Eddie Yin-Kwee Ng | Ningyu Liu | Shin Yi Tan
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 595204

General Influence Coefficient Algorithm in Balancing of Rotating Machinery

Xiaoping Yu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 910123

Inverse Design of Centrifugal Compressor Stages Using a Meanline Approach

Yuri Biba | Peter Menegay
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 747943

Improvement of the Turbine Main Stop Valves with Flow Simulation in Erosion by Solid Particle Impact CFD

Z. Mazur | G. Urquiza | R. Campos
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 10
  • - Article ID 919257

Measurements of Strain on 310 mm Torque Converter Turbine Blades

P. O. Sweger | C. L. Anderson | J. R. Blough
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.700
Journal Citation Indicator0.290
Impact Factor-
 Submit

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.